Service and Repair Manual - Serial Number Range - GS-2669 RT to GS-4069 RT

Oct 23, 2026

Upload by Aditya

Service and Repair Manual covers repair procedures, fault codes, and electrical and hydraulic schematics for qualified service professionals within specified Genie machine serial number ranges including GS6911-101, GS6916F-7897 to GS6916F-10499, and GS69F-10500 to GS69F-17999. It provides troubleshooting guidance and emphasizes compliance with safety rules, required training, and authorized dealer service when specialized tools or workshop conditions are needed. Includes machine classification and design life information, revision history, and a serial number legend defining models, facility codes, sequence numbers, labels, and stamped chassis serial numbers.

LanguageEnglish

CategoryResearch & Report

FormatPDF

Pages269

Reading Time11 h 18 min

AccessFree to download

Safety and Compliance

Machine Classification and Design Life

Repair Procedures and Troubleshooting

Fault Codes

Electrical and Hydraulic Schematics

Serial Number Legend

Before August 31, 2016

From September 1, 2016

Revision History

Service and Repair Manual Serial Number Range GS ™-2669 RT GS ™-3369 RT GS ™-4069 RT from GS6911-101 from GS6916F-7897 to GS6916F-10499 from GS69F-10500 to GS69F-17999 This manual includes: Repair procedures Fault Codes Electrical and Hydraulic Schematics For detailed maintenance procedures, refer to the appropriate Maintenance Manual for your machine. Part No. 1272219GT Rev C May 2021 Important Read, understand and obey the safety rules and operating instructions in the appropriate Operator's Manual on your machine before attempting any procedure. This manual provides troubleshooting and repair procedures for qualified service professionals. Basic mechanical, hydraulic and electrical skills are required to perform most procedures. However, several procedures require specialized skills, tools, lifting equipment and a suitable workshop. In these instances, we strongly recommend that maintenance and repair be performed at an authorized Genie dealer service center. Compliance Machine Classification Group A/Type 3 as defined by ISO 16368 Machine Design Life Unrestricted with proper operation, inspection and scheduled maintenance. | Technical Publications
Genie has endeavored to deliver the highest degree of accuracy possible. However, continuous improvement of our products is a Genie policy. Therefore, product specifications are subject to change without notice.
Readers are encouraged to notify Genie of errors and send in suggestions for improvement. All communications will be carefully considered for future printings of this and all other manuals. | | --- | | Contact Us:
[Internet: www.genielift.com](Internet: www.genielift.com)
E-mail: [awp.techpub@terex.com](awp.techpub@terex.com) | | Find a Manual for this Model
Go to [http://www.genielift.com](http://www.genielift.com)
Use the links to locate Service Manuals, Maintenance Manuals , Service and Repair Manuals, Parts Manuals and Operator's Manuals. | Copyright © 2016 by Terex Corporation 1272219GT Rev C, May 20@! First Edition, Third Printing Genie is a registered trademark of Terex South Dakota, [Inc. in](Inc. in)[ ](Inc. in)the U.S.A. and many other countries. “GS” is a trademark of Terex South Dakota, Inc. Revision History | Revision | Date | Section | Procedure / Page / Description | | --- | --- | --- | --- | | A | 3/2016 | | Initial Release | | A1 | 6/2016 | Fault Codes | Update fault codes | | A2 | 9/2016 | Introduction | Serial Number Legend | | A3 | 5/2017 | Fault Codes | Update fault codes | | B | 5/2018 | All Sections | Add GM .998L Engine information and schematics | | | | Repair | 11-6 Oscillating Axle | | C | 5/2021 | | Add ending serial break | | | | | | | Reference Examples: | | | Electronic Version
Click on any content or procedure in the Table of Contents to view
the update. | | Section – Repair Procedure, 4-2 | | | | | Section – Fault Codes, All charts | | | | | Section – Schematics, Legends and schematics | | | | Revision History (continued) | Revision | Date | Section | Procedure / Page / Description | | --- | --- | --- | --- | | | | | | | Reference Examples: | | | Electronic Version
Click on any content or procedure in the Table of Contents to view
the update. | | Section – Repair Procedure, 4-2 | | | | | Section – Fault Codes, All charts | | | | | Section – Schematics, Legends and schematics | | | | Serial Number Legend To August 31, 2016 1 Model 2 Model year 3 Facility code From September 1, 2016 4 Sequence number 5 Serial label (located inside cover) 6 Serial number (stamped on chassis) 1 Model 2 Facility code 3 Sequence number 4 Serial label (located inside cover) 5 Serial number (stamped on chassis) Danger Failure to obey the instructions and safety rules in this manual and the appropriate Operator's Manual on your machine will result in death or serious injury. Many of the hazards iden

FAQs

What sections does the manual include for repairs?

The manual includes repair procedures, fault codes, and electrical and hydraulic schematics. For detailed maintenance procedures, it directs readers to the appropriate Maintenance Manual for the machine.

Who is this manual intended for, and what skills are required?

It provides troubleshooting and repair procedures for qualified service professionals. Basic mechanical, hydraulic, and electrical skills are required for most procedures, while some require specialized skills, tools, lifting equipment, and a suitable workshop.

How is the serial number information organized in the manual?

The serial number legend explains components such as model, model year or facility code, sequence number, serial label location (inside cover), and serial number stamping (on the chassis), with definitions differing for periods before and after August 31, 2016.

Oct 23, 2026

Upload by Aditya