Maytag Washer Service Manual - Issue 5/99 - Revised 6/01

Oct 22, 2026

Maytag washer service manual for Maytag-authorized service technicians covering safety precautions and servicing procedures for specific vertical washer models. It explains required steps before and during maintenance, including electrical disconnection, precautions when the front panel is removed, and guidance to prevent excessive danger and electrical shock. The manual also provides structured introduction material and a detailed contents overview, listing general information, mechanical operation, component exploded views, cabinet assemblies, and water-related components.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages120

Reading Time5 h 2 min

AccessFree to download

SAFETY PRECAUTIONS

INTRODUCTION

SECTION 1. GENERAL INFORMATION

PRE-INSTALLATION REQUIREMENT

ELECTRICAL REQUIREMENTS

GROUNDING INSTRUCTIONS

UNCRATING INSTRUCTIONS

INSTALLATION PROCEDURE

FINAL INSTALLATION CHECK LIST

UNIQUE INSTALLATIONS

SPECIFICATIONS

CYCLE CHARTS

SPECIAL TOOLS

SECTION 2. OUTLINE OF MECHANICAL OPERATION

GENERAL INFORMATION

CLUTCH ASSEMBLY

DRIVE PULLEY AND CAMS

SECTION 3. EXPLODED VIEW OF COMPONENTS

SECTION 4. CABINET ASSEMBLY COMPONENTS

CONTROL PANEL ASSEMBLY

VERTICAL SWITCHES

TIMER REMOVAL

AUTOMATIC TEMPERATURE CONTROL BOARD

TOP COVER ASSEMBLY

STANDARD LID ASSEMBLY

30 DAY DETERGENT DISPENSER

DETERGENT DISPENSING

CLEANING THE DISPENSER

FRONT PANEL

REAR ACCESS PANEL

CABINET BODY ASSEMBLY

BASE ASSEMBLY

STABILIZER ASSEMBLY

TOP COVER TO CABINET HINGE

SECTION 5. WATER - RELATED COMPONENTS

WATER MIXING VALVE

WATER INLET FLUME

AIR BELL

HOSES

TUB TOP

AGITATOR

INNER TUB

一 Maytag MAYTAG # WasherService Manual Issued 5/99 Revised 6/01 ## SAFETY PRECAUTIONS This manual,as well as the information contained in it,is to be used only by a MaytagAuthorized Service Technician.They should be familiar with and knowledgeable ofproper safety and servicing procedures and possessing high quality testing equipmentassociated with microwaves,gas,and electrical appliance repair. All individuals who attempt repairs by improper means or adjustment subject them-selves and others to the risk of serious or fatal injury. USE ONLY GENUINE MAYTAG APPROVED FACTORY REPLACEMENT COMPONENTS. PRECAUTIONS TO BE OBSERVED BEFORE AND DURING SERVICING TO AVOIDPOSSIBLE EXPOSURE TO EXCESSIVE DANGER AND ELECTRICAL SHOCK: 1.Disconnect electrical supply before servicing machine 2.If electricity is required for a test: (A)First,disconnect electrical supply; (B)Second,make any connections or adjustments required for the test; (C)Third,connect electrical supply; (D)Fourth,perform the test.If service is required,disconnect electricalsupply before servicing machine. 3.Please use caution when servicing the machine with the front panelremoved because there is danger of injury due to potential contactwith spinning transmission. 4.Please use caution when servicing the machine with the front panelremoved because there is danger of injury due to contact with apotential "pinch point"between the turned up edge of the transmissioncover and the tub support flange. ## INTRODUCTION The information presented in this manual is printed in a loose format and is divided intosections relating to a general group of components and/or service procedures.Eachsection is further subdivided to describe a particular component or service procedure. Anything of a unique nature concerning these models has been detailed and labeled assuch in the manual. The subdividing of the subject matter,plus the loose leaf form will facilitate the updatingof the manual as new or revised components are added or new models are introduced. Each page of the manual willbe identified in the lower right-hand corner,and as new orrevised pages are published,the manual can easily be updated by following the fileinstructions on the cover letter of the supplement. The service manual is a valuable tool and care should be taken to keep it up to date byprompt and proper filing of subsequent pages as they are issued. MAV4057 MAV4500 MAV5000 MAV5057 MAV6000 MAV6057 MAV6200 MAV6257 MAV6300 Model(s)covered in this service manual: MAV7200 MAV7000 MAV7057 MAV7600 MAV7700 MAV8000 MAV8057 MAV8500 MAV8600 MAV9600 | W
AV
5000
W
A
M
Brand
M=Maytag
Model No.
Color
Q=Bisque
Product
Production
W=White
AV=Automatic
Code
Vertical Washer
Voltage
W=120 VAC/60 Hz-U.S. | | --- | i ## For additional information on material covered in this manual,including safety issues,contact: Maytag Appliances Sales Company-Customer Service240 Edwards Street,S.E.Cleveland,TN 37311 Phone:423.472.3333 FAX:423.478.6722 INTRODUCTION……………………………………………………………………………………………………………………………………i-ii CONTENTS…………………………………………………………………………………………………………………………ii-vi SECTION 1. GENERAL INFORMATION…………………………………………………………1-1 PRE-INSTALLATION REQUIREMENT…………………………………………………………………………………………………1-1 ELECTRICAL REQUIREMENTS………………………………………………………………………………………………………………1-1 GROUNDING INSTRUCTIONS………………………………………………………………………………………………………………1-2 UNCRATING INSTRUCTIONS…………………………………………………………………………………………………………………1-2 INSTALLATION PROCEDURE…………………………………………………………………………………………………………………1-3 FINAL INSTALLATION CHECK LIST……………………………………………………………………………………………………1-5 UNIQUE INSTALLATIONS……………………………………………………………………………………………………………………1-5 SPECIFICATIONS……………………………………………………………………………………………………………………………………………1-7 CYCLE CHARTS……………………………………………………………………………………………………………………………………………1-9 SPECIAL TOOLS……

FAQs

Who is this manual intended for, and what requirement must technicians meet?

The manual is intended for Maytag-authorized service technicians familiar with safe servicing procedures and possessing high quality testing equipment.

What precautions must be followed before servicing to avoid electrical shock?

Disconnect electrical supply before servicing. If electricity is required for a test, disconnect first, make required connections or adjustments, connect power, perform the test, and disconnect again before continuing service.

What additional dangers should be considered when servicing with the front panel removed?

There is risk of injury from potential contact with spinning transmission and from a potential pinch point between the transmission cover edge and the tub support flange.

Oct 22, 2026

Upload by naya.afterrain