Installation Instructions for R9S96/D9S96 & R9S92 - Single-Stage Gas Furnace

Oct 23, 2026

Upload by Fahsai

Installation instructions for the R9S96/D9S96 and R9S92 single-stage gas furnaces, including compliance statements and safety precautions for installers. The manual emphasizes knowing the product, reviewing safety warnings before installation or repair, and outlines key safety rules such as not bypassing safety devices and using properly trained personnel. It also provides guidance about pairing with cooling units using R-32 refrigerant and includes a table of contents covering installation requirements, venting, electrical connections, startup, operational checks, maintenance, and repair parts.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages56

Reading Time2 h 21 min

AccessFree to download

Safety Considerations

Electrostatic Discharge (ESD) Precautions

To the Installer

Product Application

Location Requirements & Considerations

Clearances and Accessibility

Combustion & Ventilation Requirements

Installation Positions

Horizontal Applications & Considerations

Materials-Installations in the U.S.A

Materials-Installations in Canada

Pip Installation

Combustion Air Pipe Connection

Vent/Intake Terminations for Installation of multiple direct vent furnaces

Condensate Drain Lines & Drain Trap

Electrical Connections

R-32 Information

Gas Supply and Piping

High Altitude Installation

Circulating air & filters

Startup Procedure & Adjustment

Gas Supply Pressure Measurement

Operational Checks

Safety Circuit Description

Maintenance

Filters

Before Leaving an Installation

Repair and Replacement Parts

Status codes

Installation Instructions for *R9S96/*D9S96 & *R9S92 Single-Stage Gas Furnace (Type FSP CATEGORY IV Direct or Non Direct Vent Air Furnace)(Type FSP CATÉGORIE IV Direct ou four á air soufflé non direct) These furnaces comply with requirements embodied in the American National Standard / National Standard of Canada ANSI Z21 .47·CSA-2 .3 Gas Fired Central Furnaces. RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION. *NOTE: Please contact your distributor or our website for the applicable Specification Sheet referred to in this manual. Installer: Affix all manuals adjacent to the unit. As a professional installer you have an obligation to know the product better than the customer. This includes all safety precautions and related items. Prior to actual installation, thoroughly familiarize yourself with this Instruction Manual. Pay special attention to all safety warnings. Often during installation or repair it is possible to place yourself in a position which is more hazardous than when the unit is in operation. Remember, it is your responsibility to install the product safely and to know it well enough to be able to instruct a customer in its safe use. Safety is a matter of common sense...a matter of thinking before acting. Most dealers have a list of specific good safety practices...follow them. The precautions listed in this Installation Manual are intended as supplemental to existing practices. However, if there is a direct conflict between existing practices and the content of this manual, the precautions listed here take precedence. | WARNING | | --- | | This furnace may be paired with a cooling unit that uses R-32 refrigerant. If the cooling unit paired with this furnace does not use R-32, the R-32 function in the furnace control board needs to be turned off. please see the electrical and the R-32 sections for more details.
Refrigerant systems other than 410A or R32 may require an additional mitigation control board. Refer to the installation manual of the indoor evaporator coil to determine installation requirements for that supplier’s refrigerant detection system. | | WARNING | | --- | | Only personnel that have been trained to install, adjust, service, maintenance or repair (hereinafter,“service”) the equipment specified in this manual should service the equipment.
This equipment is not intended for use by persons (including children) with reduced physical, sensory or mental capacities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the equipment.
The manufacturer will not be responsible for any injury or property damage arising from improper supervision, service or service procedures. If you service this unit, you assume responsibility for any injury or property damage which may result. In addition, in jurisdictions that require one or more licenses to service the equipment specified in this manual, only licensed personnel should service the equipment. Improper supervision, installation, adjustment, servicing, maintenance or repair of the equipment specified in this manual, or attempting to install, adjust, service or repair the equipment specified in this manual without proper supervision or training may result in product damage, property damage, personal injury or death. | | WARNING | | --- | | Do not bypass safety devices. | 90% HEX DO NOT LIFT PRODUCT USING HEAT EXCHANGER IOG-2037A 09/2023 19001 Kermier Rd. Waller, TX 77484 [www.goodmanmfg.com](www.goodmanmfg.com) • [www.amana-hac.com](www.amana-hac.com)[ ](www.amana-hac.com)© 2023 Daikin Comfort Technologies Manufacturing, L. P. is a registered trademark of Maytag Corporation or its related companies and is used under license. All rights reserved. TABLE OF CONTENTS Safety Considerations .......................................

FAQs

What safety responsibilities does the installer have before installation?

Installers must thoroughly familiarize themselves with the instruction manual and pay special attention to all safety warnings. They are responsible for installing the product safely and instructing the customer in its safe use.

Can the furnace be paired with a cooling unit that uses R-32?

Yes, the furnace may be paired with a cooling unit that uses R-32 refrigerant. If the paired cooling unit does not use R-32, the R-32 function on the furnace control board must be turned off.

Who is allowed to service the equipment covered by the manual?

Only trained personnel who install, adjust, service, maintain, or repair the specified equipment should service it. Children should be supervised to ensure they do not play with the equipment, and improper supervision or procedures can lead to injury, death, or property damage.

Oct 23, 2026

Upload by Fahsai