Tempstar PAD4/WPA4 Owner’s Information Manual - 14 SEER Packaged Air Conditioner

Oct 24, 2026

Upload by Levi

Owner’s Information Manual for Tempstar PAD4 and WPA4 14 SEER single and three phase packaged air conditioner systems using R-410A refrigerant, covering 2 to 5 nominal tons (sizes 24–60). Provides unit and installation information recording tables, dealer contact fields, and clear safety guidance for owners and installers. Includes critical warnings and cautions about fire, explosion, electrical shock, sharp hazards during panel removal, and safe shutdown/startup steps, plus guidance for thermostat-controlled operation and mode selection.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages6

Reading Time15 min

AccessFree to download

Safety Considerations

Starting or Shutting Unit Off

Operating Your Unit

Cooling Mode

Heating Mode (if equipped with optional electric heat)

CLICK ANYWHERE on THIS PAGE to RETURN to TEMPSTAR HVAC at [InspectApedia.com](InspectApedia.com) PAD4, WPA4 14 SEER Single and Three Phase Single Packaged Air Conditioner System with R-410A Refrigerant 2-5 Nominal Tons (Sizes 24-60) Owner’s Information Manual A09034 Fig. 1 – Unit PAD4 and WPA4 | NOTE TO EQUIPMENT OWNER:
For your convience, please record the model and serial numbers of your new equipment in the spaces provided. This information, along with the installation data and dealer contact information, will be helpful should your system require maintenance or service. | | | --- | --- | | UNIT INFORMATION
Model \# Serial \#
ACCESSORIES (List type of model \#)
| INSTALLATION INFORMATION
Date Installed
DEALERSHIP CONTACT INFORMATION
Company Name Address

Phone Number Technician Name | | NOTE TO INSTALLER:
This manual must be left with the eqipment owner. | | Our products are designed, tested and built in accordance with DOE standardized procedures; however, actual operating results and efficiencies may vary based on manufacturing and supplier tolerances, equipment configuration, operating conditions and installation practices. Safety Considerations Improper installation adjustment, alteration, service, maintenance, or use can cause explosion, fire, electrical shock, or other conditions which may cause death, personal injury, or property damage. Consult a qualified installer, service agency, or your distributor or branch for information or assistance. The qualified installer or agency must use factory-authorized kits or accessories when modifying this product Refer to the individual instructions packaged with the kits or accessories when installing. Follow all safety codes. Wear safety glasses, protective clothing, and work gloves. Use quenching cloth for brazing operations. Have a fire extinguisher available. Read these instructions thoroughly and follow all warnings or cautions included in literature and attached to the unit. Consult local building codes, the current editions of the National Electrical Code (NEC) NFPA 70. In Canada refer to the current editions of the Canadian electrical Code CSA C22. 1. Recognize safety information. This is the safety-alert symbol . When you see this symbol on the unit and in instructions or manuals, be alert to the potential for personal injury. Understand these signal words; DANGER, WARNING, and CAUTION. These words are used with the safety-alert symbol. DANGER identifies the most serious hazards which will result in severe personal injury or death. WARNING signifies hazards which could result in personal injury or death. CAUTION is used to identify unsafe practices which may result in minor personal injury or product and property damage. NOTE is used to highlight suggestions which will result in enhanced installation, reliability, or operation. NOTE: Installer: This manual should be left with the equipment user. | ! WARNING | | --- | | | | FIRE, EXPLOSION, ELECTRICAL SHOCK HAZARD
Failure to follow this warning could result in personal injury, death, and/or property damage.
Installation and servicing of this equipment can be hazardous due to mechanical and electrical components. Only trained and qualified personnel should install, repair, or service this equipment. | | ! WARNING | | --- | | | | FIRE, EXPLOSION HAZARD
Failure to follow this warning could result in personal injury, death, and/or property damage.
Do not store or use combustible materials, gasoline, or other flammable vapors and liquids in the vicinity of this or any other appliance. | | ! WARNING | | --- | | | | ELECTRICAL SHOCK HAZARD
Failure to follow this warning could result in personal injury and/or death.
Before performing recommended maintenance, be sure the main power switch to unit is turned off and lock-out tag is installed. | | ! CAUTION | | --- | | | | CUT HAZARD
Failure to follow this caution may re

FAQs

What information should the owner record in the manual?

Record the unit model and serial numbers, installation date, and dealership contact information including company name, address, phone number, and technician name.

What are the key safety risks highlighted in the manual?

The manual emphasizes hazards including fire, explosion, and electrical shock, along with safe practices such as using protective gear and following electrical code requirements.

How do you start or shut off the unit?

To start, turn on electrical power and set the temperature and MODE control to the desired mode. To shut off, set MODE control to OFF and turn off electrical power to the unit.

Oct 24, 2026

Upload by Levi