GCP Registration Form - Section 3 Registration Summary

Aug 31, 2026

Upload by Putri

Registration requires completing facility tables and providing a structured Registration Summary describing the site, its process, and any proposed modifications. The form collects facility type, written details of routine operations, and how startup, shutdown, maintenance (SSM) emissions and malfunction emissions are accounted for, including separation from other event categories. It also verifies stack parameter requirements using the provided Stack Calculator guidance, covering engines, turbines, flares, enclosed combustion devices, heaters, and reboilers through equipment-specific emission rate and parameter calculations.

LanguageEnglish

CategoryForms

FormatDOCX

Pages22

Reading Time8 min

AccessFree to download

Section 2 - Tables

Section 3 - Registration Summary

Specify Facility Type

Registration Summary and Facility Description

Routine Operations and Equipment Fate

Emissions Accounting for SSM and Malfunctions

Allowable Operations

Verification of Compliance with Stack Parameter Requirements

Engines

Turbines

Flares

Section 2 Tables _____________________________________________________________________________________________ Insert Excel spreadsheet with applicable tables filled out. If applicable to the facility all tables must be filled out completely. The unit numbering system must be consistent throughout this Registration _____________________________________________________________________________________________ Section 3 Registration Summary ______________________________________________________________________________________________________ The Registration Summary: Provide information about the registration submittal. The Registration Summary shall include a brief description of the facility and its process. In case of a modification to a facility, please describe the proposed changes. ______________________________________________________________________________________________________ Specify Facility Type: Check the appropriate box below: FORMCHECKBOX Production Site FORMCHECKBOX Tank Battery FORMCHECKBOX Compressor Station FORMCHECKBOX Natural Gas Plant FORMCHECKBOX Other, please specify:______________ Registration Summary: Provide Registration summary here. See above instructions. Written description of the routine operations of the facility: Include a detailed description of how each piece of equipment will be operated, how controls will be used, and the fate of both the products and waste generated. Routine or predictable emissions during Startup, Shutdown and Maintenance (SSM): Provide an overview of how SSM emissions are accounted for in this Registration. Malfunction Emissions (M): Provide an overview of how malfunction emissions are accounted for in this Registration. The permit does not authorize combustion emissions for malfunctions. The permit does not authorize emissions from SSM and Malfunction to be combined as 10 TPY VOC. However, they may be permitted separately. In the allowable emissions table in Section 2, these two events are separate line items and must be kept separate. Allowable Operations: Check the appropriate box below: FORMCHECKBOX Facility operates continuously (8760 hours per year) FORMCHECKBOX The following regulated equipment will operate less than 8760 hours per year. Add additional rows as necessary. These units are subject to Condition A108.C of the Permit. Table A – Equipment Operating Less Than 8760 hours per year Verification of Compliance with Stack Parameter Requirements: Please use the Stack Calculator and Stack Requirements Explained Guidance on our website: All of the verification information below is required to be filled out. HYPERLINK "http://www.env.nm.gov/air-quality/air-quality-oil-and-gas-gcp-application-forms/" www.env.nm.gov/air-quality/air-quality-oil-and-gas-gcp-application-forms/ Check the box for each type of equipment at this facility: FORMCHECKBOX Engine(s) FORMCHECKBOX Turbine(s) FORMCHECKBOX Flares(s) FORMCHECKBOX Enclosed Combustion Device (s) FORMCHECKBOX Heater(s) FORMCHECKBOX Reboiler(s) For each type of equipment checked above, complete the applicable section below. Engines Calculate the pound per hour (lb/hr) NOx emission rate according to GCP O&G Condition A202.I Step 1 on page 15 of the GCP O&G. Enter this value in the top row of the table below. Based on the calculated facility total NOx emission rate, determine the minimum stack parameter requirements for engines and heaters from Table 1: Engines (page 17) of the GCP O&G and enter the minimum parameters from Table 1 (page 17) of the GCP O&G in the bottom row of the table below. Enter the stack parameters from each engine and heater in the blank rows of the table below. Add rows as necessary. Table B: Engine/Generator/Heater/Reboiler Stack Parameter Verification: Do all engines and heaters comply with the minimum stack parameters from Table 1 (page 17) of the GCP O&G? FORMCHECKBOX Yes. Skip step 5 below. FORMCHECKBOX

FAQs

What information must be provided in the Registration Summary?

The Registration Summary must include a brief description of the facility and its process, and if the facility is being modified, the proposed changes.

How should SSM and malfunction emissions be handled in this registration?

The registration must provide an overview of how SSM emissions and malfunction emissions are accounted for, keep SSM and malfunction separate in the allowable emissions table, and note that the permit does not authorize combining them as a single 10 TPY VOC quantity.

What does stack parameter verification require for different equipment types?

For each selected equipment type, the form requires calculating the applicable NOx or SO2 rates, determining minimum stack parameters or heights from the referenced tables, and completing the verification tables to show whether minimum stack parameters are met; if not met, detailed explanations and calculations are required.

Aug 31, 2026

Upload by Putri