Turbo Rocky - Kit No. 3103 - Racing Buggy Assembly Instruction

Oct 28, 2026

Upload by 658056

RADIO CONTROLLED ELECTRIC POWERED RACING BUGGY kit instructions for Turbo Rocky (type kit No. 3103) at 1:10 scale, including key specifications such as 8.4V power, four-wheel drive, metal-gear differentials, alloy aluminum chassis, and drivetrain reliability features. The manual covers pre-assembly guidance: read instructions fully, check bagged parts, follow grease/locktite markings, understand screw types, verify part orientation with illustrations, and avoid overtightening self-tapping screws. It also lists items and tools needed, compatible batteries and motors (Le Mans series), and charging options with recommended charger models and charge times.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages36

Reading Time1 h 31 min

AccessFree to download

BEFORE ASSEMBLY

Check parts and prepare components

Grease, locktite, and attention points

THINGS NEEDED BESIDES THE KIT

Radio system and motor options

Battery types and charging methods

Recommended chargers and charging times

TOOLS REQUIRED

Radio control set types and tools

RADIO CONTROLLED ELECTRIC POWERED RACING BUGGY4WDOFF-ROADRACERTURBO ROCKY ●HIGH-SPEED THRILLS FOR NEWCOMER AND EXPERT! ●STRENGTHENED FOR 8.4V POWER! ●QUALITY DESIGN AND MATERIALS. ●FOUR-WHEEL DRIVE BY LIGHTWEIGHT STEEL CHAIN.RELIABLE AND STRONG. ●EASY ASSEMBLY AND ADJUSTMENT. ●METAL-GEAR DIFFERENTIALS FRONT/REAR. ●COMBINED UNIVERSAL JOINT/HALFSHAFT FOR MECHANICAL RELIABILITY AND STRENGTH. ●ALLOY ALUMINUM CHASSIS.RUGGED DESIGN. 1:10 SCALEBATTERY:8.4V-1200mAhMOTOR:LeMANS-240/360TYPEKIT NO.3103ReScranvard not | BEFORE ASSEMBLY
*Read the Instruction
Carefully.
You can assemble the kit
more easily if you have
grasped the general idea
ryope
of steps and structure
beforehand by reading 1t
through to the end.
Instruction
*Check the Parts in the Kit
Check to see if all the parts are correctly
bagged as they are listed in the "List of
Bagged Parts.
List of
bagged
parts
Your through understanding of the assembly
will enable you to bulld the kit without any
difficulty.Check the components in the kit
prior to your startings the assembly.Any
claims for replacements or refunds for the
model in the process of assembly will not
be accepted.
*Lean the Marks described in the Instruction.
Points where grease should
applied.(It wil1 reduce
friction and assure smooth
movements.)
Places to put some locktite.
9.EEE
(It wil1 prevent the screws
and nuts get loosen by
Vibration while running.)
Steps where you particular
attention is required.
★Be well aware of the Different types of
screws.
1.The difference betveen the TP screw(short
form of self-tapping screw)and the ordinarly
screw is,··
Self Tapping Screw
Ordinary Screw
Some of
Finer Thread
them have
Coarser
pointed tips,
Thread | 2.The kinds of screws which will be used in
this instruction.
Truss Screw
(There are two kinds
Round and
of thread,finer and
bigger head
coarser ones.)
Flat Head Screw
( " )
A shape of
dish
(Finer thread and
Tap Tight
tapered tip.)
A hexagonal hollow in
Set Screw
place of serew head.
gd sarfat
Head
*Pick up the correct
parts and screw
Compare the shape and
size of smal1 parts,
such as scews,nuts,
and washers with the
parts with the
attached sheet of
1ist.
"List of Small Parts."
kBe sure about the 1ocation
and direction of parts to
install.
Double-check the location Directon
and orientation of parts
with the illustration before
installation.When
necessary,assemble the
parts themselves tentatively
before proceeding to the
next step.
*Do not tighten the self-tapping screw too
tight.
Do not use excessive force when tightening
the self-tapping screws,or you may strip the
thread in the plastic. It is recommended to
stop tightening it when the threaded part on
the screw goes into the plastic part and you
feel some resistance from the tightening.
Over tighten may strip
Good
the thread in the plastie.
Wrong | | --- | --- | THINGS NEEDED BESIDES THE KIT (2 Channel Radio System) (N1-Cad Battery) (Charger for Ni-Cad Battery) (Motor) Six(6)types of RacingMotor "Le Mans"areavailable which aresuitable, TOOLS REQUIRED Two types of radio control set are on the market,the stick type and the steering wheeltype.Choose which ever you like. "Turbo Rocky"is designed to use a rechargeable 8.4V N1-Cad battery pack.A Kyosho RacingBattery,part number 1932(and some other brands)may be recharged at a wide range of rates.The charging rate depends on the type of charger used. The Kyosho's Ni-Cad Battery is of high performance.If it is charged correctly,it w

FAQs

What should be done before starting assembly?

Read the instruction carefully from beginning to end, then check that all parts are correctly bagged according to the list of bagged parts. Review the general idea of the steps and structure before proceeding.

How should self-tapping screws be handled to avoid damage?

Do not tighten self-tapping screws too tightly or use excessive force, as this may strip the thread in the plastic. Stop tightening when the threaded part enters the plastic and resistance is felt.

What battery and charger options are recommended for Turbo Rocky?

Turbo Rocky is designed for a rechargeable 8.4V Ni-Cad battery pack. Charging options include a 15-hour AC100V charger or faster chargers powered by DC12V sources such as a car cigarette lighter or 12V battery, with multiple model choices and charge time ranges provided.

Oct 28, 2026

Upload by 658056