Solstice & Solstice Supreme - Installation & Operation Manual - L20-378 rev. 4 - (10/18)

Oct 28, 2026

Installation & Operation Manual for Solstice and Solstice Supreme equipment, covering models built after 08/2000. Includes purchaser, owner, and store-manager warnings; instructions for posting emergency guidance if gas odor occurs; and safety cautions covering flammable liquids, proper installation, authorized service requirements, and warranty-voiding actions. Specifies grounding, gas and electrical connection compliance with local codes, stabilization for legs/casters, use of approved disconnect devices, and restrictions on cleaning, moving, and operating under hot conditions. Emphasizes annual inspection, ventilation-hazard precautions, and correct oil/shortening handling to reduce risk of fire and injury.

LanguageEnglish

CategoryHealthcare

FormatPDF

Pages36

Reading Time1 h 31 min

AccessFree to download

To the Purchaser, Owner and Store Manager

Warning and safety instructions

Installation, grounding, and code compliance

Warranty and authorized service requirements

IMPORTANT FOR FUTURE REFERENCE Please complete this information and retain this manual for the life of the equipment: Model \#: Serial \#: Date Purchased: ENGLISH Installation & Operation Manual Covering all Solstice & Solstice Supreme With Matchless Ignition Built after 08/2000 L20-378 rev. 4 (10/18) TO THE PURCHASER, OWNER AND STORE MANAGER Please review these warnings prior to posting them in a prominent location for reference. | TO THE PURCHASER
Post in a prominent location the instructions to be followed in the event that an operator smells gas. Obtain this information from your local gas supplier. | | --- | | FOR YOUR PROTECTION
DO NOT store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
Do not spray aerosols in the vicinity of this appliance when it isin operation. | | WARNING
Improper installation, operation, alteration, adjustments, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing, operation, servicing this appliance. | WARNING Installation, maintenance and repairs should be performed by a Pitco Authorized Service and Parts (ASAP) company technician or other qualified personnel. Installation, maintenance or repairs by an unauthorized and unqualified personnel will void the warranty. WARNING Installation and all connections must be made according to local codes in force. In the absence of local codes in North America, the installation must conform with the National Fuel Gas Code, ANSI Z223.1/NFPA 54 or the Natural Gas and Propane Installation Code CSA B149.1 as applicable. In Australia, the appliance must installed in compliance with AS/NZS 5601. WARNING During the warranty period if a customer elects to use a nonoriginal part or modifies an original part purchased from Pitcoand/or its Authorized Service and Parts (ASAP) companies, this warranty will be void. In addition, Pitco and its affiliates will not be liable for any claims, damages or expenses incurred by the customer which arises directly or indirectly, in whole or in part, due to the installation of any modified part and/or received from an unauthorized service center. WARNING This appliance, when installed, must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.2, as applicable and the hose must comply with AS/NZS 1869 and be class B or D. WARNING Adequate means must be provided to LIMIT the movement or this appliance without depending on the gas or electrical cord connection. Single appliances equipped with legs must be stabilized by installing anchor straps. All appliances equipped with casters must be stabilized by installing restraining chains. WARNING An appliance equipped with casters and a flexible gas line must be connected to the gas supply with a quick disconnect device. In North America this quick disconnect must comply with ANSIZ24.41 . In Australia, the quick disconnect must comply with AS 4627. WARNING DO NOT alter or remove structural material on the appliance to accommodate placement under a ventilation hood. WARNING If the appliance is equipped with a power cord and it is damaged, it must be replaced by a Pitco Authorized Service and Parts (ASAP) company technician, or a similarly qualified person in order to avoid a hazard. WARNING The power supply must be disconnected before servicing, maintaining or cleaning this appliance. WARNING The appliance is NOT jet stream approved. DO NOT clean the appliance with a water jet. WARNING DO NOT attempt to move this appliance or transfer hot liquids from one container to another when the unit is at operating temperature or filled with hot liquids. Serious personal injury could result if skin comes in contact with the hot surfaces o

FAQs

What should be posted for operators if they smell gas?

Post instructions in a prominent location about what to do if an operator smells gas, and obtain the information from the local gas supplier.

Who is allowed to perform installation, maintenance, and repairs?

Installation, maintenance, and repairs must be performed by a Pitco Authorized Service and Parts (ASAP) company technician or other qualified personnel; unauthorized work voids the warranty.

What safety steps are required before servicing, maintaining, or cleaning the appliance?

Disconnect the power supply before servicing, maintaining, or cleaning, and do not use a water jet or open flame to check for gas leaks.

Oct 28, 2026

Upload by FajarTechTalk