SOLID PHENOLIC CASEWORK & CABINETRY - SECTION 06 41 16 - PART 1 GENERAL

Oct 28, 2026

Upload by Jacob

Solid phenolic laboratory casework and cabinetry specifications define scope, related sections, and required submittals including product data, shop drawings with detailed dimensions, finish color chips, verification samples, and fabricator ISO 9001 certification. Project requirements cover storage, hazardous material handling, maintenance of temperature, humidity, and ventilation within manufacturer limits, and warranty documentation based on selected phenolic type and duration. Product provisions specify manufacturers, phenolic thicknesses, cabinet body construction, hardware performance requirements, and work-surface fabrication methods for edges, joins, sink cutouts, and drip grooves.

LanguageEnglish

CategoryResearch & Report

FormatPDF

Pages4

Reading Time10 min

AccessFree to download

SECTION 06 41 16

PART 1 GENERAL

1.1 SECTION INCLUDES

1.2 RELATED SECTIONS

1.3 SUBMITTALS

1.4 DELIVERY, STORAGE, AND HANDLING

1.5 PROJECT CONDITIONS

1.6 WARRANTY

PART 2 PRODUCTS

2.1 Manufacturers

2.2 Casework and Cabinetry

2.3 Cabinet Hardware

2.4 Accessories

2.5 Work Surface Fabrication

2.6 Cabinetry Fabrication

SOLID PHENOLIC CASEWORK & CABINETRY SECTION 06 41 16 PART 1 GENERAL 1.1 SECTION INCLUDES A. Solid Phenolic Laboratory Casework and Cabinetry B. Solid Phenolic Composite Laboratory Work Surfaces 1.2 RELATED SECTIONS A. Section 06200 – Finish Carpentry: Finish trim associated with countertops and Work Surfaces. B. Section 10500 – Lockers: Locker systems installed beneath Work Surfaces. C. Section 10670 – Storage Shelving: Shelf Systems installed adjacent to or connecting with Work Surfaces. D. Section 15400 – Plumbing Fixtures and Equipment: Plumbing for sinks field inserted on countertops. 1.3 SUBMITTALS A. Submit under provisions of Section 01300 B. Product Data: Manufacturers data sheets on each product. C. Shop Drawings: Submit shop drawings indicating room sizes, layout, cabinet dimensions, material thickness, size and location of fixture holes, utility, and sink cut outs. D. Selection Samples: For each finish product specified, one complete set of color chips representing manufacturer’s full range of available colors and patterns. E. Verification Samples: For each finish product specified, two samples, representing product, color, and patterns. F. Fabricator ISO 9001 Certification Certificate 1.4 DELIVERY, STORAGE, AND HANDLING A. Store products in manufacturer’s unopened packaging until ready for installation. B. Store and dispose of hazardous materials in accordance with requirements of local authorities having jurisdiction. 1.5 PROJECT CONDITIONS . Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer’s absolute limits. 1.6 WARRANTY . At project closeout, provide to the owner representative an executed copy of the selected warranty period (1, 5, 10, 15, 20) year(s) based on type of phenolic selected. . Fabricator must be ISO 9001 certified. PART 2 PRODUCTS 2.1 Manufacturers A. Drawings and specifications are based on casework fabricated using solid phenolic panels by one of the following manufacturers: 1. Richlite (20 Year product Warranty) 2. ABET Laminati (20 Year Product Warranty) 3. Paperstone (15 Year Product Warranty) 4. Trespa (10 year Product Warranty) 5. ARPA (10 Year Product Warranty) 6. Fiberresin (1 Year Product Warranty) 7. Pionite (1 Year Product Warranty) 8. Formica (1 Year Warranty) 9. Wilsonart (1 Year Warranty) 10. Nevamar (1 Year Warranty) 2.2 CASEWORK AND CABINETRY A. Color: To be selected by architect B. Doors: ½”(13mm) thick solid phenolic composite material. C. Edges: Machined polished and free from tooling imperfections. D. Cabinet Bodies: 1. Exposed edges: Straight profile; eased edges to remove sharpness; machine polished and free from tooling imperfections. 2. Cabinet Sides and Bottoms: ½” inch (13mm) thickness 3. Door and Drawer Heads: ½” inch (13mm) thickness 4. Horizontal Rail Supports: ½” inch (13mm) thickness 5. Cabinet Backs: ¼” inch (6mm) thickness 6. Wall Cabinet Backs: ½” inch (13mm) thickness 7. Cabinet Shelves: ½” inch (13mm) thickness 8. Intermediate Stretchers: ½” inch (13mm) thickness 9. Security Panels: ¼” inch (6mm) thickness 10. Drawer Box: ½” inch (13mm) thickness 11. Top Stretcher: ½” (13mm) thickness 2.3 CABINET HARDWARE A. Hinges: Hinges to accommodate ½” (13mm) door thickness. Meets or exceeds ANSI/BHMA A156 .9-2003 load and cycle test. 11. One pair per door to 48 inch (1219mm) height. 12. One and one half pair per door 48 (1219mm) through 72 inch (1829mm) height 13. Two pair per door over 72 inches (1829mm) height. B. Pulls to be 304 stainless steel satin 4 inch (127mm) wire pull. 1. Drawers less than 24 inches (610mm) in width to receive one pull 2. Drawers over 24 inches (610mm) in width to receive two pulls 3. Doors receive one pull C. Adjustable shelf supports: Shelf clips to be nic

FAQs

What does the specification cover for solid phenolic casework and cabinetry?

It covers solid phenolic laboratory casework and cabinetry and solid phenolic composite laboratory work surfaces, including related finish carpentry, lockers, storage shelving, and plumbing fixtures.

What submittals are required before installation?

Submit section 01300 requirements, manufacturer product data, shop drawings showing room sizes, layout, cabinet dimensions, material thickness, and fixture hole cutouts, plus selection and verification samples for each specified finish product. Fabricator ISO 9001 certification is also required.

Which warranty and fabricator qualification requirements apply?

At closeout, provide an executed warranty copy for the selected warranty period (1, 5, 10, 15, or 20 years) based on the phenolic type. The fabricator must be ISO 9001 certified.

Oct 28, 2026

Upload by Jacob