SLK-Superlift - Operator's Manual - Safety Rules

Nov 4, 2026

Operator’s Manual for the Genie SLK-Superlift focuses on mandatory safety rules and safe operating procedures. It requires trained, authorized personnel only, with clear instructions to read, understand, and obey all safety and operating guidance. The safety section covers fall hazards, tip-over hazards, electrocution hazards with minimum safe approach distances by voltage, and crushing/bodily injury precautions, including inspection, function tests, workplace checks, and limits on load capacity and handling.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages23

Reading Time58 min

AccessFree to download

Safety

Safety Rules

Fall Hazards

Tip-over Hazards

Lifting Hazards

Electrocution Hazards

Bodily Injury Hazard

Crushing Hazards

| Operator´ s Manual | | | | --- | --- | --- | | |
with counterbalance weights | | 07/13 Operator's Manual Important Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall be permitted to operate this machine. This manual should be considered a permanent part of your machine and should remain with the machine at all times. If you have any questions, call Genie Industries. Contents Page Safety .....................................................................................3 Legend ....................................................................................8 Pre-operation Inspection ............................................................9 Function Tests ......................................................................... 11 Workplace Inspection ............................................................... 15 Operating Instructions............................................................... 16 Load Capacity Charts ............................................................... 18 Transport and Lifting Instructions ............................................20 Specifications .........................................................................21 Contact us: Phone:+49 5903-93 94 0 [Internet:www.wienold-lifte.de](Internet:www.wienold-lifte.de) [e-mail: info@wienold-lifte.de](e-mail: info@wienold-lifte.de) Operator's Manual Safety Rules Warning Failure to obey the instructions and safety rules in this manual may result in death or serious injury. Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual. 1 Avoid hazardous situations. Know and understand the safety rules before going on to the next section. 2 Always perform a pre-operation inspection. 3 Always perform the function tests prior to use. 4 Inspect the workplace. 5 Only use the machine as it was intended. You read, understand and obey the manufacturer's instructions and safety rules—safety and operator's manuals and machine decals. You read, understand and obey employer's safety rules and worksite regulations. You read, understand and obey all applicable governmental regulations. You are properly trained to safely operate the machine. Operator's Manual SAFETY RULES Fall Hazards Do not use the machine as a personnel lifting platform or step. Do not stand on the load handling attachments. Do not climb on the mast. Tip-over Hazards Do not raise the load unless the stabilizers (if equipped) and legs have been fully lowered and locked and the casters are in full contact with the ground. Do not raise the load unless the leg retainer pins are properly inserted through the leg and the base. Do not remove the leg retainer pins while the machine is loaded and/or raised. Do not raise the load unless the machine is on a firm, level surface. Do not raise the load unless the load handling attachment is properly secured to the machine. Do not use blocks to level the machine. Do not move the machine with a raised load, except for minor positioning. Do not operate the machine in strong or gusty winds. Increasing the load surface area will decrease machine stability in windy conditions. Do not leave a load raised when windy conditions may occur unless the machine(s) are properly guywired. Do not cause a horizontal force or side load to the machine by raising or lowering a fixed or overhanging load. Prior to use, check the work area for drop-offs, holes, bumps, debris, unstable or slippery surfaces or other possible hazardous conditions. Operator's Manual SAFETY RULES Do not place ladders or scaffolding against any part of the machine. Do not use the machine on a moving or mobile surface or vehicle. Do not exceed the rated load capacity. See Load Capacity Charts section. Avoid deb

FAQs

Who is allowed to operate the SLK-Superlift?

Only trained and authorized personnel may operate the machine. Operators must read, understand, and obey the manual’s safety rules and operating instructions.

What pre-use steps are required before operating?

The operator must learn and practice safe operation principles, always perform a pre-operation inspection, and always perform function tests prior to use. The workplace must also be inspected for hazards.

What precautions are required near electrical power lines?

The machine is not electrically insulated, so personnel must keep away if it contacts energized power lines and must not touch or operate until power lines are shut off. Maintain safe approach distances according to the chart and consider mast movement, line sway/sag, and wind conditions.

Nov 4, 2026

Uploaded by Alexandar