Shop Manual GX390RT2/T2/UT2 - How to Use This Manual - Safety Information

Oct 28, 2026

Service and repair guidance for Honda GX390RT2/T2/UT2 outlines safe procedures and responsibilities for qualified professional technicians. The manual explains that improper service can cause injury or damage, emphasizing following documented methods and using recommended parts. It covers general workshop safety precautions, personal protective equipment, hazard prevention steps, ventilation and engine-off requirements, fire/explosion risk awareness, and specific safety messaging and contents structure for later sections.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages42

Reading Time1 h 46 min

AccessFree to download

How to use this manual

A Few Words About Safety

Service Information

For Your Customer’s Safety

For Your Safety

Important Safety Precautions

Introduction

Service and repair scope for Honda GX390RT2/T2/UT2

Safety messages and publication notice

Contents

[62Z5F000.book](62Z5F000.book) 1 ページ 2010年3月23日火曜日午後3時31分 How to use this manual A Few Words About Safety SERVICE INFORMATION The service and repair information contained in this manual is intended for use by qualified, professional technicians. Attempting service or repairs without the proper training, tools, and equipment could cause injury to you and/or others. It could also damage this Honda product or create an unsafe condition. This manual describes the proper methods and procedures for performing service, maintenance, and repairs. Some procedures require the use special tools. Any person who intends to use a replacement part, service procedure or a tool that is not recommended by Honda, must determine the risks to their personal safety and the safe operation of this product. If you need to replace a part, use Honda Genuine parts with the correct part number or an equivalent part. We strongly recommend that you do not use replacement parts of inferior quality. For Your Customer’s Safety Proper service and maintenance are essential to the customer’s safety and the reliability of this product. Any error or oversight while servicing this product can result in faulty operation, damage to the product, or injury to others. | | | | | | --- | --- | --- | --- | | | | | | | Improper service or repairs can create an unsafe condition that can cause your customer or others tobe seriously hurt or killed.
Follow the procedures and precautions in this manual and other service materials carefully. | | | | For Your Safety Because this manual is intended for the professional service technician, we do not provide warnings about many basic shop safety practices (e.g. , Hot parts-wear gloves) . If you have not received shop safety training or do not feel confident about your knowledge of safe servicing practice, we recommend that you do not attempt to perform the procedures described in this manual. Some of the most important general service safety precautions are given below. However, we cannot warn you of every conceivable hazard that can arise in performing service and repair procedures. Only you can decide whether or not you should perform a given task. | | | | | | --- | --- | --- | --- | | | | | | | Failure to properly follow instructions and precautions can cause you to be seriously hurt or killed. Follow the procedures and precautions in this manual carefully. | | | | Important Safety Precautions Make sure you have a clear understanding of all basic shop safety practices and that you are wearing appropriate clothing and using safety equipment. When performing any service task, be especially careful of the following: • Read all of the instructions before you begin, and make sure you have the tools, the replacement or repair parts, and the skills required to perform the tasks safely and completely. • Protect your eyes by using proper safety glasses, goggles, or face shields anytime you hammer, drill, grind, or work around pressurized air, pressurized liquids, springs or other stored-energy components. If there is any doubt, put on eye protection. • Use other protective wear when necessary, for example gloves or safety shoes. Handling hot or sharp parts can cause severe burns or cuts. Before you grab something that looks like it can hurt you, stop and put on gloves. • Protect yourself and others whenever you have engine-power equipment up in the air. Anytime you lift this product with a hoist, make sure that the hoist hook is securely attached to the product. Make sure the engine is off before you begin any servicing procedures, unless the instruction tells you to do otherwise. This will help eliminate several potential hazards: • Carbon monoxide poisoning from engine exhaust. Be sure there is adequate ventilation whenever you run the engine. • Burns from hot parts. Let the engine and exhaust system cool before working in those areas. • Injury from moving parts. If the

FAQs

Who is the service information intended for in this manual?

It is intended for qualified, professional technicians. Attempting repairs without proper training, tools, and equipment could cause injury or damage.

What is emphasized for the customer’s safety?

Proper service and maintenance are essential for customer safety and product reliability. Errors or oversights can lead to faulty operation, damage, or injury.

Which general safety precautions does the manual highlight before servicing?

It stresses clear understanding of shop safety practices, wearing appropriate clothing and safety equipment, reading instructions first, using eye protection during hazardous work, and taking precautions around carbon monoxide, hot parts, moving parts, and fuel/batteries.

Oct 28, 2026

Upload by CatatanPagi