Safety Training Catalogue - NATT Safety Services - Working at Heights Training

Sep 30, 2026

Safety Training Catalogue - NATT Safety Services outlines the Working at Heights course and refresher training for construction settings. It explains the training’s aim, recommended duration (6.5 hours for the main program; 4 hours for refresher), and key theory and practical topics including hazard recognition, hierarchy of controls, fall protection systems, personal fall protection equipment, anchor points, access platforms, and rescue plans. Completion requires at least an 80% written evaluation and successful practical assessment. The catalogue also summarizes Ontario regulatory duties, eligibility requirements, certification validity for 3 years, and PPE expectations such as full body harness.

LanguageEnglish

CategoryHealthcare

FormatPDF

Pages114

Reading Time4 h 47 min

AccessFree to download

Working at Heights Training

Training aim and learning outcomes

Duration

Course topics (theory)

Course topics (practical)

Evaluation and completion requirements

Legislation and compliance requirements

Employer duties and approved training

Training record and inspector availability

Who requires this training

Eligible workers and required fall protection methods

Course benefits and PPE requirements

Certification validity

PPE requirements

Working at Heights Refresher Training

Refresher purpose

Duration

Course topics (practical)

Evaluation and completion requirements

Safety Training Catalogue Safety Training Catalogue-NATT Safety Services DOC \#0038 Feb 02/25 Safety Training Catalogue-NATT Safety Services 1 866 244 3334 Safety Training Catalogue-NATT Safety Services Working at Heights Our Working at Heights training program was created and developed by NATT Safety Services and is CPO approved (PRO-34727) . 1 866 244 3334 Safety Training Catalogue-NATT Safety Services Working at Heights Training The aim for this training is to create the easiest and safest solution when working at heights . This training allows you to recognize and avoid hazards associated with working at heights . Duration 6. 5 hours total theory + practical Course Topics-Theory i . Roles , right and responsibilities related to working at heights under the Occupational Health and Safety Act ii . General hazard recognition for working at heights iii . Hierarchy of controls iv. Safety procedures for warning methods and physical barriers v. Barrier s and Safety Nets vi . Ladder s and Similar Equipment Course Topics-Practical i . Fall protection Systems ii . Personal Fall Protection Equipment iii . Anchor Points iv. Work Access Equipment and Platforms v. Rescue Plans You must achieve an 80% or higher on the written evaluation and successfully complete the practical evaluation in order to successfully complete the course. Continued > 1 866 244 3334 Page 3 Safety Training Catalogue-NATT Safety Services Legislation The Occupational Health Regulation 297/ 13) under requirement. and the Safety Awareness and OHS Act clearly set s o Training ut WAH Regulation ( Ont arias a mandatory o I n addi t i on to t hes e r equi r ements , empl oyers c ont i n ue to have a duty under subsection 26. 2 ( 1) of O. Reg. 213/ 91 ( Construction Projects ) to ensure that workers who may use a fall protection system are adequately trained on the use of the system, and are given adequate oral and written instructions by a competent person. Employers with workers who are required by O. Reg. 213/ 91 ( Construction Projects ) to use any of the fall protection methods listed above must do the following: Ensure the worker completes a working at heights training program that has been approved by the CPO as having met the Working at Heights Training Program Standard applicable at the time of the training; Ensure the training provider delivering the training program was approved by the CPO as having met the Working at Heights Training Provider Standard applicable at the time of training; Ensure the worker’s training is valid and has not expired; Maintain a training record for the worker that includes the worker’s name, the approved training provider’s name, the date the training was completed and the name of the approved training program; And make the training record available to a Ministry of Labour inspector on request. Continued > 1 866 244 3334 Page 4 Safety Training Catalogue-NATT Safety Services Who Requires this Training Any worker who is required under Ontario Regulation 213/ 91 ( Construction Projects ) to use any of the following methods of f all protection: A travel restraint system A fall restricting system A fall arrest system A safety net A work belt A safety belt under O. Reg 253/ 14, s . 1. Course Bene􀂄ts Successful participants of the Working at Heights training will receive their certification for a 3-year period. PPE Requirements Full Body Harness . 1 866 244 3334 Page 5 Safety Training Catalogue-NATT Safety Services Working at Heights Refresher Training 1 866 244 3334 Page 6 Safety Training Catalogue-NATT Safety Services Working at Heights Refresher Training Working at Heights refresher training reinforces key learning outcomes for workers who are exposed to the danger of falling from height s on construction projects

FAQs

What is the purpose of the Working at Heights training?

The training provides the easiest and safest solution for working at heights. It helps participants recognize and avoid hazards related to working at heights.

How long is the Working at Heights refresher training and what does it cover?

The refresher training lasts 4 hours. It reinforces fall protection systems, personal fall protection equipment, anchor points, work access equipment and platforms, and rescue plans.

What are the completion requirements for the course?

Participants must achieve an 80% or higher on the written evaluation and successfully complete the practical evaluation to complete the course.

Sep 30, 2026

Uploaded by Indoniesian Boy