REPAIR MANUAL 2010 - KTM 690 Enduro Series - read this repair manual carefully

Oct 28, 2026

KTM 2010 repair manual for the 690 Enduro models (EU, AUS/UK, R EU, R AUS/UK, R USA) provides servicing guidance that the vehicle can meet operating demands only when specified service work is performed regularly and correctly. It stresses using original KTM spare parts and outlines that the document corresponds to the latest technical state while allowing changes without updating. It also states that general workshop methods and workshop safety rules are not covered and assumes trained mechanics.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages265

Reading Time11 h 8 min

AccessFree to download

MEANS OF REPRESENTATION

IMPORTANT NOTES

LOCATION OF SERIAL NUMBERS

Chassis number/type label (690 Enduro, 690 Enduro R EU, 690 Enduro R AUS/UK)

Chassis number/type label (690 Enduro R USA)

Key number

Engine number

Fork part number

Shock absorber part number

MOTORCYCLE

Raising the motorcycle with the lift stand

Removing the motorcycle from the lift stand

Starting

Starting the motorcycle to make checks

01 - FORK, TRIPLE CLAMP

Adjusting the compression damping of the fork

Adjusting the rebound damping of the fork

Bleeding the fork legs

Cleaning the dust boots of the fork legs

Removing fork legs

Installing the fork legs

Servicing the fork

REPAIR MANUAL 2010 690 Enduro EU 690 Enduro AUS/UK 690 Enduro R EU 690 Enduro R AUS/UK 690 Enduro R USA Article no. 3206089en Read this repair manual carefully and thoroughly before beginning work. Only use ORIGINAL KTM SPARE PARTS. The vehicle will only be able to meet the demands placed on it if the specified service work is performed regularly and properly. This repair manual was written to correspond to the latest state of this series. We reserve the right to make changes in the interest of technical advancement without at the same time updating this manual. We shall not provide a description of general workshop methods. Likewise, safety rules that apply in a workshop are not specified here. It is assumed that the repair work will be performed by a fully trained mechanic. All specifications are non-binding. KTM Sportmotorcycle AG specifically reserves the right to modify or delete technical specifications, prices, colors, forms, materials, services, designs, equipment, etc., without prior notice and without specifying reasons, to adapt these to local conditions, as well as to stop production of a particular model without prior notice. KTM accepts no liability for delivery options, deviations from illustrations and descriptions, as well as misprints and other errors. The models portrayed partly contain special equipment that does not belong to the regular scope of delivery. © 2010 KTM-Sportmotorcycle AG, Mattighofen Austria All rights reserved Reproduction, even in part, as well as copying of all kinds, is permitted only with the express written permission of the copyright owner. ISO 9001(12 100 6061) According to the international quality management standard ISO 9001, KTM uses quality assurance processes that lead to the maximum possible quality of the products. Issued by: TÜV Management Service KTM-Sportmotorcycle AG 5230 Mattighofen, Austria MEANS OF REPRESENTATION ............................................ 5 IMPORTANT NOTES ............................................................ 6 LOCATION OF SERIAL NUMBERS ........................................ 7 Chassis number/type label (690 Enduro, 690 Enduro R EU, 690 Enduro R AUS/UK) ....................... 7 Chassis number/type label (690 Enduro R USA) ................. 7 Key number .................................................................... 7 Engine number ................................................................ 7 Fork part number ............................................................. 8 Shock absorber part number ............................................. 8 MOTORCYCLE ..................................................................... 9 Raising the motorcycle with the lift stand .......................... 9 Removing the motorcycle from the lift stand ...................... 9 Raising the motorcycle with the work stand ........................ 9 Removing the motorcycle from the work stand .................. 10 Starting ........................................................................ 10 Starting the motorcycle to make checks ........................... 11 01/FORK, TRIPLE CLAMP .................................................. 12 Adjusting the compression damping of the fork ................ 12 Adjusting the rebound damping of the fork....................... 12 Bleeding the fork legs .................................................... 13 Cleaning the dust boots of the fork legs ........................... 13 Loosening the fork protection .......................................... 14 Positioning the fork protection ........................................ 14 Removing fork legs ........................................................ 15 Installing the fork legs ................................................... 16 Servicing the fork .......................................................... 17 Disassembling the fork legs ..........................

FAQs

What parts should be used according to the manual?

Use only ORIGINAL KTM SPARE PARTS when performing repair work.

Does the manual include general workshop methods and safety rules?

No. It states that general workshop methods and workshop safety rules are not described and assumes the work is performed by a fully trained mechanic.

How does the manual handle technical changes?

It states the manual corresponds to the latest state of the series but KTM may change technical specifications without updating the manual, and reserves the right to modify or delete details.

Oct 28, 2026

Upload by notyourbestiee