Remote Start Owner’s Guide - Introduction - Using the Remote Start

Oct 23, 2026

Uploaded by Miles

Owner’s guide for a Hyundai Remote Start system, covering safe usage responsibilities, FCC compliance notices, and core remote-control operations. Explains how to lock/unlock via the remote start fob, how to start and stop the engine with button sequences, and how to drive off after remote starting while following timing and ignition/brake rules. Provides climate preset guidance for heater settings, wiper/headlight circuit precautions to prevent battery drain, and valet/service mode entry and exit. Includes remote start failure diagnostics using horn chirp counts and troubleshooting topics.

LanguageEnglish

CategoryHealthcare

FormatPDF

Pages6

Reading Time15 min

AccessFree to download

Using the Remote Start

Pairing Remote Start Fob

Remote-Starting your Vehicle

Remote Start Run Time

Vehicle Presets

Remote Start Features

Remote Start Error Diagnostic

Valet/Service Mode

Genuine Parts © 12/2015 HYUNDAI Regular Key Genuine Parts REMOTE START OWNER’S GUIDE WARNING It is the responsibility of the vehicle operator to ensure that their vehicle is parked in a safe and responsible manner. 1. When leaving the vehicle, it is the user’s responsibility to ensure that the gearshift lever is in “Park” in order to avoid accidents upon remote starting. (Note: Make sure that the vehicle cannot start in “Drive”.) 2. It is the user’s responsibility to ensure that the remote starter is disabled or put into valet mode before servicing. FCC COMPLIANCE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION:Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device. REMOTE START OWNER’S GUIDE INTRODUCTION Congratulations on your purchase of a Remote Start system. This easy-to-use manual details the operation instructions and benefits of the Remote Start System. Should you have questions regarding this system that this manual does not address, please contact your local dealer. TABLE OF CONTENTS: Using the Remote Start 3 Pairing Remote Start Fob 7 Description of Remote Start Fob Button Functions Battery Replacement 8 for Remote Start Fob Remote-Starting your Vehicle 4 Remote-Starting Troubleshooting Poor Transmitter Range 9 Driving Off Remote Start Run Time 10 Vehicle Presets 4 Heater Windshield Wipers and Headlights Remote Start Features 5 Remote Start Error Diagnostic Valet/Service Mode 1 2 Using The Remote Control Description of Remote Start Fob Lock/Unlock Note: Press the button 1 time on the transmitter to lock the vehicle. Press the button 2 times to unlock the driver’s door, and 2 additional times to unlock all doors. Button Functions | Button Image | Button | LED/icon | Feature | | --- | --- | --- | --- | | | Press 1 time
Press 2 times
Press 2 times x 2 Hold 2 seconds |

| Lock
Unlock driver’s door Unlock all doors Remote start/stop | Note: Make sure to press button only after LED lighting ends to activate each feature properly. 3 Remote Starting your Vehicle Remote Starting Using Remote Start Fob 1. Press button 1 time, the lock icon will display. Within 3 seconds, press and hold the button for 2 seconds, the key icon will flash and the vehicle will start. 2. Remote Stop-Press and hold button for 2 seconds. The key icon will flash and the engine will turn off. Note: Make sure to press a button only after LED lighting ends to activate each feature properly. Driving Off With the vehicle running remotely, press the button 2 times to unlock the driver’s door, enter the vehicle and perform the following to drive off: 1) Insert the vehicle’s key to the IGNITION, turn to the ON position and press the brake pedal. The vehicle is now ready to drive. Note: The Factory Key Fob will NOT function during Remote Start operation. The engine will shut off if either of the following occurs; 1) The drive off procedure is not initiated within 30 seconds of opening any door, within 50 seconds of opening tailgate / trunk. 2) The brake is pressed without the vehicle key in the ignition in the ON position. If the vehicle turnns off, simply start the vehicle using the normal starting procedure as detailed in the vehicle’s owner’s manual. Vehicle Presets Heater When leaving the vehicle, it is recommended to preset the climate controls in preparation for the next remote start. The climate controls for the fan should not be left on HIGH. It is recommended to leave the setting on LOW or MEDIUM instead. Windshield Wipers, Headlights Certain vehicles req

FAQs

What responsibilities does the driver have when using remote start?

The driver must ensure the vehicle is parked safely and that the gearshift lever is in “Park” before remote starting. The driver must also disable the remote starter or use valet mode before servicing.

How do you start and stop the engine using the remote start fob?

To start, lock the vehicle using the transmitter, then within 3 seconds press and hold the button for 2 seconds until the key icon flashes. To stop, press and hold the button for 2 seconds until the key icon flashes and the engine turns off.

How does valet/service mode work and how do you enable it?

Valet mode disables remote starter functions to prevent unexpected starting during service or parking indoors. To engage, turn the ignition ON, press and hold the brake pedal, then press and hold the remote button for 2 seconds until lights flash and the horn sounds once.

Oct 23, 2026

Uploaded by Miles