Rapeseed Headers, Series JD 600 - Operating Manual - Last revised 10/2013

Oct 24, 2026

Operating manual for Rapeseed Headers, Series JD 600, defining intended agricultural use and warning against improper operation. Provides instructions to read the manual carefully to prevent injuries and machine damage, explains correct metric dimension usage, and clarifies right/left directions. Includes guidance for recording product identification numbers, dealer inspection requirements before delivery and after initial hours, and strict rules for who may service or repair the header. Contains safety-alert information, safety decal handling, road traffic compliance, emergency preparedness, and pre-delivery inspection test checklist.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages30

Reading Time1 h 16 min

AccessFree to download

Introduction

Pre-delivery Inspection

Predelivery Inspection

Product Identification

Typical Appearance

Safety

Recognize Safety Information

Follow Safety Instructions

Observe Road Traffic Regulations

Use Safety Lights and Devices

Prepare for Emergencies

|
OPERATING MANUAL
Rapeseed Headers, Series JD 600 | | --- | | | | Last revised 10/2013
Zürn Harvesting GmbH & Co. KG Eichenstraße 27
D-74747 Ravenstein-Merchingen Tel.: +49 6297 92885-0
Fax: +49 6297 92885-19
E-Mail: [Info@zuern.de](Info@zuern.de)
[Internet: www.zuern.de](Internet: www.zuern.de) | Introduction Intended use: This header is designed only for the usual application in agricultural work or similar activities. Any other use beyond this is deemed improper use of the machine for which the manufacturer is not liable for resultant damages; any risks in this regard are borne by the user alone. Proper use also includes complying with the operation, maintenance and service conditions specified by the manufacturer. READ THIS OPERATING MANUAL CAREFULLY to familiarize yourself with the correct operation and maintenance of the equipment and avoid injuries or damage to the machine. Not doing so can result in injuries or machine damage. THIS OPERATING MANUAL IS PART OF THE MACHINE and should be given to the purchaser upon resale. DIMENSIONS specified in this operating manual are metric. The corresponding dimensions for the USA are also indicated. Use only appropriate parts and bolts. Different wrenches are required for metric bolts and bolts with English unit dimensions. THE DESIGNATIONS “RIGHT” AND “LEFT” refer to the forward direction of the machine. ENTER THE PRODUCT IDENTIFICATION NUMBERS in the corresponding place in the Inspection section prior to delivery. Please record all numbers accurately. In case of theft, these numbers ca be important fortracing the equipment. Moreover, your John Deere dealer needs these numbers when you order spare parts. It is a good idea to keep a second record of these numbers in another location. Your dealer has performed an INSPECTION OF THE MACHINE BEFORE DELIVERY. Another inspection should be carried out by your dealer after the first 20 to 50 hours of operation in order to ensure the best possible performance for the machine. THIS HEADER MUST ONLY be used, serviced and repaired by persons who are familiar with it and who have been instructed on its hazards. The relevant accident prevention regulations and other generally recognized rules and laws for safety, occupational health and road traffic must also be followed. Unauthorized changes to this combine harvester release the manufacturer from any liability for resultant damages Table of contents Introduction 1 Table of contents 2 Pre-delivery Inspection 3 Product Identification 3 Typical Appearance 4 Safety 5 Safety Decals 12 Right Side Component Assembly 13 Initial Installation on the John Deere Header 18 Various Versions of Attachment Parts 19 Attaching the Rapeseed Header to the Cutterbar 22 Attaching the Center Support(s) (only from 22FT) 24 Attaching the Dividers 25 Spacer plates for the 9.15 m Rapeseed Header 26 Removing the Side Safety Panel 27 Lubricants and Fill Quantities 28 Lubrication Schedule and Periodic Maintenance 29 Pre-delivery Inspection The following tests, setting adjustments and maintenance were performed prior to delivery: Predelivery Inspection 1. Is cutterbar drive gear case oil level correct? 2. Are all belts properly tensioned and running correctly? 3. Can reel tines be adjusted properly? 4. Are knifes centered in cutterbar? 5. Is reel lift device working correctly? 6. Is reel fore-and-aft adjusting device working properly? 7. Is the cutting platform lubricated? 8. Are all hydraulic lines free from leaks and tight? 9. Are all guards, shields etc. installed? 10. Paint and decals smooth and neat? 11. Have cutting platform operation and safety rules been explained to the operator? Signature Dealer/Service Technician: Date: Product Identification | Header type: | | | --- | --- | | Serial number: | | | Year of manufacture: | | To be entered by the dealer | Typical Appearance | | --- | | | | Rap

FAQs

What is the intended use of the Rapeseed Header, Series JD 600?

The manual states it is designed only for usual agricultural work or similar activities. Any other use is considered improper and is not covered by the manufacturer’s liability.

What must be checked during pre-delivery inspection?

Before delivery, the manual lists checks such as cutterbar drive gear case oil level, belt tension and running, reel tine adjustability, knife centering, reel lift and fore-and-aft adjustment, lubrication of the cutting platform, and inspection for hydraulic leaks and installed guards.

How should safety information be handled when operating or servicing the header?

The manual requires following safety-alert precautions, keeping safety signs in good condition, replacing missing or damaged safety signs and damaged safety items, and ensuring only instructed and familiar persons service or repair the equipment while complying with accident prevention and road traffic regulations.

Oct 24, 2026

Upload by Aria Callaghan