Promaster 250Z & 260Z - Owner/Operator Manual

Nov 4, 2026

Uploaded by gewufjwa

Owner/Operator Manual for Promaster 250Z and 260Z models, providing guidance on controls, safety, assembly, operation, maintenance, attachments and accessories, maintenance schedule, specifications, and warranty information. Includes a controls and features section mapping numbered components such as mower deck, fuel shutoff valve, parking brake, battery, indicators, controls, steering levers, and mower lift. Provides introduction instructions for reading the manual, recording model/serial numbers, completing product registration, using authorized replacement parts, and dealer delivery checks and safety interlock system requirements.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages26

Reading Time1 h 6 min

AccessFree to download

Controls and Features

Introduction

The Manual

Service and Replacement Parts

Product Registration

Unauthorized Replacement Parts

Disclaimer

Dealer Delivery

Safety

Assembly

Operation

Maintenance

Maintenance Schedule

Attachments and Accessories

Specifications

Warranty

Promaster 250Z & 260Z Owner/Operator Manual Models 992018-PM 260Z 992020-PM 260Z 992021-PM 260Z 992022-PM 260Z 992023-PM 250Z 992024-PM 260Z 992027-PM 260Z ENGLISH FRANÇAIS ESPAÑOL 08486600A 10/00 Supersedes 08486600 Printed in USA CONTROLS AND FEATURES 4 12 13 14 15 16 2 21 20 1 22 8 18 9 10 3 17 OF1722 Figure 1 | WARNING | | --- | | The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. | ENGLISH 1. Mower Deck with Chute Deﬂector 2. Fuel Shut Off Valve 3. Parking Brake 4. Battery 5. Hour Meter 6. Oil Pressure Indicator 7. Engine Frame and Hood (260Z) 8. Fuel Tanks and Caps 9. Choke Control 10. Throttle Lever 11. Ignition Switch 12. Power Take Off (PTO) Switch 13. Steering Levers 14. Mower Lift Lever 15. Seat Adjustment Lever 16. Seat Suspension Adjustment Knob (260Z) 17. Height of Cut Indicator 18. Hydraulic Oil Reservoir 19. Engine Hood Latch (260Z) 20. Foot Board Latch 21. Cylinder Stop Storage Post 22. Cylinder Stops FRANÇAIS 1. Carter de coupe avec déﬂecteur 2. Robinet de carburant 3. Frein de stationnement 4. Batterie 5. Compteur horaire 6. Indicateur de pression d'huile 7. Châssis du moteur et capot (260Z) 8. Réservoirs de carburant et bouchons 9. Starter 10. Manette des gaz 11. Contacteur de démarrage 12. Contacteur de régime de la PdF 13. Leviers de direction 14. Levier de relevage de la tondeuse 15. Levier de réglage du siège 16. Levier de réglage de la suspension (260Z) 17. Indicateur de hauteur de coupe 18. Réservoir d’huile hydraulique 19. Verrou du capot du moteur (260Z) 20. Attache du repose-pied 21. Montant de remisage de butées devérin 22. Butées de vérin ESPAÑOL 1. Plataforma de corte 2. Válvula de cierre de combustible 3. Freno de estacionamiento 4. Batería 5. Horómetro 6. Indicador de la presión del aceite 7. Motor y cubierta del motor (260Z) 8. Tapas y depósitos de combustible 9. Control de aire 10. Palanca de ralentí 11. Interruptor de encendido 12. Interruptor de la toma de fuerza (TDF) 13. Palancas de dirección 14. Palanca de elevación del cortacésped 15. Palanca de ajuste del asiento 16. Palanca de ajuste de la suspensión (260Z) 17. Altura del indicador de corte 18. Depósito de aceite hidráulico 19. Traba del capó del motor (260Z) 20. Traba de la plataforma de pie 21. Poste de almacenamiento del topedel cilindro 22. Topes de cilindro 23. ZylinderanschlagAufbewahrungspfosten 24. Zylinderanschläge TABLE OF CONTENTS Controls and Features ......................3 Introduction...............................5 Safety ....................................6 Assembly................................11 Operation................................12 Maintenance ............................. 15 Attachments and Accessories .............. 25 Maintenance Schedule .................... 23 Speciﬁcations............................ 24 Warranty .................. Inside Back Cover INTRODUCTION THE MANUAL Before operation of unit, carefully and completely read your manuals. The contents will provide you with an understanding of safety instructions and controls during normal operation and maintenance. All reference to left, right, front, or rear are given from operator sitting in the operation position and facing the direction of forward travel. SERVICE AND REPLACEMENT PARTS Transfer model & serial number label from product registration here. When ordering publications, replacement parts, or making service inquiries, know the Model and Serial numbers of your unit and engine. Numbers are located on the product registration form in the unit literature package. They are printed on a serial number label, located on the frame of your unit (Figure 2) . • Record Unit Model and Serial numbers here. • Reco

FAQs

What is the purpose of the manual before operating the unit?

The manual explains safety instructions and the controls needed for normal operation and maintenance. Read it carefully and completely before using the unit.

Where can the Model and Serial numbers be found?

They are located on the product registration form in the unit literature package and are printed on a serial number label on the frame of the unit (Figure 2).

Why must only authorized Gravely replacement parts be used?

Using non-authorized parts may adversely affect performance, durability, and safety, and may void the warranty. Gravely disclaims liability for claims or damages arising from unauthorized replacement parts.

Nov 4, 2026

Uploaded by gewufjwa