Polyfilla Wall Paint Preparation - Product Information - Directions, Technical Data, Storage & Disposal

Sep 27, 2026

Uploaded by Patrick

LEPAGE Polyfilla Wall Paint Preparation is a ready-to-use, extra fine off-white patching compound for repairing interior wall surface damage. It smooths imperfections, fills shallow cracks and holes, dries fast, sands to a super fine finish, and resists dents. It has low odour and cleans up with water; once fully dry it is paintable and sandable. Includes available package sizes, key benefits, recommended uses, limitations, typical physical/application/cured properties, directions for use, and storage and disposal guidance.

LanguageEnglish

CategoryHealthcare

FormatPDF

Pages3

Reading Time8 min

AccessFree to download

DESCRIPTION

FEATURES & BENEFITS

RECOMMENDED FOR

LIMITATIONS

TECHNICAL DATA

Typical Uncured Physical Properties

Typical Application Properties

Typical Cured Performance Properties

DIRECTIONS

STORAGE & DISPOSAL

LABEL PRECAUTIONS

DISCLAIMER

LIMITED WARRANTY

Polyfilla® Wall Paint Preparation DESCRIPTION LEPAGE® Polyfilla® Wall Paint Preparation is a ready to use, extra fine patching compound for repairing surface damage to interior walls. Ideal for smoothing surface imperfections and filling shallow cracks and holes. The creamy, off-white paste spreads easily, dries fast and sands to a super fine finish that is smooth, hard and dent resistant. It has low odour and wet filler can be easily cleaned with water. Polyfilla Wall Paint Preparation is also paintable and sandable once fully dry. Available as: | Item \# | Package | Size | | --- | --- | --- | | 1256102 | Plastic Tub | 300 mL | | 1256105 | Plastic Tub | 900 mL | | 1292879 | Plastic Tub | 2.7 L | FEATURES & BENEFITS • Ready to use, no mixing required • Paintable and sandable to blend with surroundings • Water clean-up, no harsh chemicals needed • Quick drying for rapid completion of repairs • Non-sagging, easy to apply RECOMMENDED FOR LePage Polyfilla Wall Paint Preparation can be used on interior wood, drywall, wallboard and plaster. It fills shallow cracks, smooths wood grain, cover hammer marks and fills over nail and screw heads. LIMITATIONS • Not recommended for use in exterior applications • Not recommended for areas in contact with moisture or water • Not recommended for filling large, deep holes • Not recommended for repairs subject to movement or requiring flexibility TECHNICAL DATA | Typical Uncured Physical Properties | | | --- | --- | | Color: Off white
Appearance: Smooth paste
Base: Polymer binder / fillers
Odour: Mild
Shelf Life: 18 months from date of manufacture
(unopened) | Viscosity: 1,000 to 1,400 Mcps
% Solids: 75% to 78%
pH: 6.5 to 8.1
Specific Gravity: 1.55 | TECHNICAL DATA | Lot Code Explanation:(Stamped on bottom of tub) | YM\#\#\# Y = Year M = Month
\#\#\# = Batch \# of a product manufactured in that given month and year
For example:
NE028
N = Year = 2022
E = Month = May
028 = This is the 28th batch of this product manufactured in May 2022 | Year Month 2020 K January A 2021 M February B 2022 N March C 2023 P April D 2024 R May E 2025 S June F 2026 T July G 2027 W August H 2028 X September J 2029 Y October K 2030 A November M 2031 B December N
Note: I, L, O, Q, U, V, and Z have been skipped | | --- | --- | --- | | Typical Application Properties | | --- | | Application Temperature: Apply and cure above 10°C (50°F)
Dry Time: Approximately 4 hours for a 2-3 mm (1/16” – 1/8”) deep hole*
* Varies based on temperature, humidity, and fill depth | | Typical Cured Performance Properties | | | --- | --- | | Colour: Off white
Cured Form: Hard non-flexible solid
Water Resistant: No | Service Temperature: -18°C (0°F) to 66°C (151°F)
Paintable: Yes
Sandable: Yes | DIRECTIONS Tools Typically Required: Putty knife or spatula , 80 and 120 grit sandpaper, and damp cloth or rag. Safety Precautions: Wear gloves , safety glasses, and wash hands after use. Preparation: Apply and cure product above 10°C (50°F) . Colder temperatures and humid conditions will greatly extend drying time. Surfaces must be clean, dry and free of loose materials. Remove ragged drywall paper from damaged edges. Application: Apply with a spatula or putty knife and smooth. For best results, fill slightly above the surface level and overlap onto the surrounding area. For filling deeper holes and depressions, avoid cracking due to shrinkage by applying in layers 2 to 3 mm (1/16 to 1/8”) thick. Allow each layer to dry before applying the next. Allow Polyfilla® Wall Paint Preparation to dry and then sand into the surrounding surfaces using an 80 grit paper and finishing with a 120 grit paper. Prime filled area before painting. The patch can be painted with a water-based or oil-based paint. If not completely dry, the paint may bubble or lift. Clean-up: Clean skin and tools immediately with water. Dried material can be sanded

FAQs

What interior wall damages is Polyfilla Wall Paint Preparation intended to repair?

It is designed to smooth surface imperfections and fill shallow cracks and holes on interior wood, drywall, wallboard, and plaster, including covering hammer marks and nail or screw heads.

How should the product be applied and how long does it take to dry?

Apply and cure above 10°C (50°F). Dry time is approximately 4 hours for a 2–3 mm deep hole, and for deeper holes apply in layers of 2 to 3 mm, letting each layer dry before the next.

What are the main limitations and unsuitable use cases?

It is not recommended for exterior use, areas in contact with moisture or water, filling large deep holes, or repairs that will be subject to movement or require flexibility.

Sep 27, 2026

Uploaded by Patrick