PD15X-X-X - Operator’s Manual - Operation, Installation & Maintenance

Oct 23, 2026

Uploaded by Jiven

Operator’s manual for PD15X-X-X 1-1/2” diaphragm pump with 1:1 ratio metallic operation. Covers operation, installation, and maintenance guidance, including service kit references by model material option. Provides pump data such as model identification cues, weights by configuration, maximum pressure and flow specifications, temperature limits for multiple diaphragm/ball/seal materials, noise level, dimensional and mounting information. Includes operating and safety precautions for excessive air pressure, static spark, hazardous pressure, and hazardous materials.

LanguageEnglish

CategoryHealthcare

FormatPDF

Pages8

Reading Time20 min

AccessFree to download

Operator’s Manual Overview

Service Kits and Pump Data

Operating and Safety Precautions

OPERATOR’S MANUAL PD15X-X-X INCLUDING: OPERATION, INSTALLATION & MAINTENANCE 1-1/2” DIAPHRAGM PUMP 1:1 RATIO (METALLIC) PE15X-X-X RELEASED: 8-7-03 REVISED: 6-19-06 (REV. 13) READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING THIS EQUIPMENT. It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference. | SERVICE KITS | | | --- | --- | | Refer to Model Description Chart to match the pump material options. 637389 for air section repair (see page 6) .
637375-XX for fluid section repair (see page 4). NOTE: This kit also con
tains several air motor seals which will need to be replaced. 637390-X major air valve assembly (see page 7) . | | | PUMP DATA | | | Models see Model Description Chart for 􀀂-XXX". Pump Type . . . . . . . . . . Metallic Air Operated Double Diaphragm Material . . . . . . . . . . . . . see Model Description Chart.
Weight . . . PX15R-XAX-XXX . . . . . . . 33.9 lbs (15.4 kgs)
PX15R-XCX-XXX . . . . . . . 73.2 lbs (33.2 kgs)
PX15R-XHX-XXX . . . . . . . 86.9 lbs (39.4 kgs) PX15R-XSX-XXX . . . . . . . 61.2 lbs (27.8 kgs) add 2.14 lbs (0.97 kg) for Aluminum air motor section add 18.14 lbs (8.23 kg) for Stainless Steel air motor section | | | Maximum Air Inlet Pressure Maximum Material Inlet Pressure Maximum Outlet Pressure Maximum Flow Rate (flooded inlet) Displacement / Cycle @ 100 p.s.i.g. . . . Maximum Particle Size | 120 p.s.i.g. (8.3 bar) 10 p.s.i.g. (0.69 bar) 120 p.s.i.g. (8.3 bar)
123 g.p.m. (465.6 l.p.m.) 0.617 gal. (2.34 lit.) 1/4" dia. (6.4 mm) | | Maximum Temperature Limits (diaphragm / ball / seal material)
E.P.R. / EPDM . . . . . . . . . . . -60 􀀄 to 280 􀀄 F (-51 􀀄 to 138 􀀄 C) Hytrel􀀅 . . . . . . . . . . . . . . . . -20 􀀄 to 150 􀀄 F (-29 􀀄 to 66 􀀄 C) Nitrile . . . . . . . . . . . . . . . . . 10 􀀄 to 180 􀀄 F (-12 􀀄 to 82 􀀄 C) Polypropylene . . . . . . . . . . . 35 􀀄 to 150 􀀄 F (2 􀀄 to 66 􀀄 C) Santoprene􀀅 . . . . . . . . . . . -40 􀀄 to 225 􀀄 F (-40 􀀄 to 107 􀀄 C)
T.F.E. (Teflon􀀅) . . . . . . . . . . 40 􀀄 to 225 􀀄 F (4 􀀄 to 107 􀀄 C) Viton􀀅 . . . . . . . . . . . . . . . . -40 􀀄 to 350 􀀄 F (-40 􀀄 to 177 􀀄 C)
Dimensional Data . . . . . . . . . . . . . . . . see page 8
Mounting Dimension . . . . . . . 9" x 11.75" (228.6 mm x 298.5 mm) Noise Level @ 70 p.s.i., 60 c.p.m. . . . . . 82.8 db(A)􀀃
􀀄 The pump sound pressure levels published here have been updated to an Equivalent Continuous Sound Level (LAeq) to meet the intent of ANSI S1.13-1971, CAGI-PNEUROP S5.1 using four microphone locations.
NOTICE: All possible options are shown in the chart, however, certain combinations may not be recommended, consult a representative or the factory if you have questions concerning availability. | | INGERSOLL RAND COMPANY LTD P.O. BOX 151 􀀃 ONE ARO CENTER 􀀃 BRYAN, OHIO 43506-0151 􀀂 (800) 276-4658 􀀃 FAX (800) 266-7016 􀀂2006 CCN 15197213 OPERATING AND SAFETY PRECAUTIONS READ, UNDERSTAND, AND FOLLOW THIS INFORMATION TO AVOID INJURY AND PROPERTY DAMAGE. | EXCESSIVE AIR PRESSURE STATIC SPARK
| HAZARDOUS MATERIALS HAZARDOUS PRESSURE | | --- | --- | WARNING EXCESSIVE AIR PRESSURE. Can cause personal injury, pump damage or property damage. 􀀆 Do not exceed the maximum inlet air pressure as stated on the pump model plate. 􀀆 Be sure material hoses and other components are able to withstand fluid pressures developed by this pump. Check all hoses for damage or wear. Be certain dispensing device is clean and in proper working condition. WARNING STATIC SPARK. Can cause explosion resulting in severe injury or death. Ground pump and pumping system. 􀀂 Sparks can ignite flammable material and vapors. 􀀂 The pumping system and object being sprayed must be grounded when it is pumping, flushing, recirculating or spraying flammable materials such as paints, solvents, lacquers, etc. or used in a location where surrounding atmosphere is conducive to spontaneous combustion. Ground

FAQs

What does the PD15X-X-X operator’s manual cover?

It covers operation, installation, and maintenance instructions for the PD15X-X-X 1-1/2” diaphragm pump, including references to service kits and pump data.

How does the manual advise preventing static spark during use?

It instructs grounding the pump and pumping system, ensuring flammable materials and the sprayed object are grounded, and following specified continuity checks after grounding.

What should be done before servicing to avoid hazardous pressure risks?

The manual instructs not to service or clean while the system is pressurized, then to disconnect the air supply and relieve pressure by opening the dispensing valve or carefully loosening and removing outlet hose or piping.

Oct 23, 2026

Uploaded by Jiven