PCB Copper Layout for MC1630-1 Case Style - 06AF04 Pin Code - Notes

Oct 29, 2026

Mechanical and PCB layout notes for Mini-Circuits MC1630-1 case style, specifying a recommended mounting configuration and the “06AF04” pin code. The notes define trace width and gap parameters for Rogers RO4350B with 0.0066 ± 0.0007 dielectric thickness and 1/20 oz copper on each side, while warning that other materials may require modification. They also state that the bottom PCB layer uses a continuous ground plane, describe solder mask over bare copper (SMOBC), and indicate copper land patterns free of solder mask.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages1

Reading Time3 min

AccessFree to download

NOTES

Trace width and gap parameters

Ground plane and copper layout symbols

FAQs

What trace width and gap parameters are specified in the notes?

Trace width and gap parameters are shown for Rogers RO4350B with dielectric thickness 0.0066 ± 0.0007 and 1/20 oz copper on each side.

What is stated about the bottom layer of the PCB?

The bottom side of the PCB is a continuous ground plane.

How are the terms SMOBC and copper land patterns defined?

SMOBC denotes solder mask over bare copper, and copper land patterns are denoted as free of solder mask.

Oct 29, 2026

Upload by Emma Wilson