Orca Slicer 2.0+ - Hollow Knight Pure Vessel 打印切片参数详解

Aug 27, 2026

Upload by Skyler

Orca Slicer 2.0+ 的切片推荐参数面向 Hollow Knight Pure Vessel 3D 模型，提供从质量、壁面与表层、支撑、填充到速度的系统化设置范围。文档强调按打印机、材料与具体零件微调，并给出首层与层高、线宽、接缝位置、Arachne 墙体生成选项、桥接与悬垂检测以及常用速度档位。还包含校准项提示与联系支持团队获取进一步协助。

LanguageEnglish

CategoryTechnology

FormatPDF

Pages20

Reading Time50 min

AccessFree to download

Quality Tab

Strength

Speed

Orca Slicer 2.0+ Gambody printing recommendations for: Hollow Knight Pure Vessel 3D Printer Files | Assembly Below you’ll find detailed slicing settings for Orca Slicer 2.0+ to help you get the best results when printing this model. These settings are optimized specifically for this 3D model and should work well in most cases. But they’re not set in stone-depending on your printer, material, or even the specific part you're working with, feel free to tweak things. Every 3D printing setup is different, so feel free to make the changes that work best for your machine. When in doubt, check your printer’s manual-or reach out to our Support Team at [support@gambody.com](support@gambody.com) We’ll be happy to help with any questions, suggestions, or issues you may have regarding the recommended printing settings! Quality Tab | Layer height | | | --- | --- | | Layer Height | 0.12-0.20 mm | | For better quality use 0.12 mm layer height, for fast printing use 0.2 mm layer height. For pins and the Ge connectors, use 0.2 layer height. | | | First layer height | 0.20-0.28 mm | | 120-150% of your Layer Height | | | --- | --- | | Line width | | | Default: | 0.42 mm | | Initial Layer | 0.45-0.50 mm | | Outer wall | 0.42 mm | | Inner wall | 0.45 mm | | Top surface | 0.45 mm | | Sparse infill | 0.45 mm | | Internal solid infill | 0.45 mm | | Support | 0.42 mm | | Seam | | | Seam position | Aligned | | But you can paint the seam if you want. | | | Seam gap | 10.0 % | | Role base wipe speed | ✔ | | Wipe speed | 80.0 % | | Precision | | | Slice gap closing radius | 0.049 mm | | Resolution | 0.012 mm | | --- | --- | | X-Y hole compensation | 0.01 mm | | 0.01-0.05 You have to calibrate this parameter | | | X-Y contour compensation | 0.01 mm | | 0.01-0.05 You have to calibrate this parameter | | | Elephant foot compensation | 0.10 mm | | 0.1-0.2 You have to calibrate this parameter | | | Elephant foot compensation layers | 1 layers | | Ironing | | | Ironing Type | No ironing | | Wall generator | | | Wall generator | Arachne | | Wall transitioning threshold angle (Arachne setting) | 10.0 ° | | Wall transitioning filter margin (Arachne setting) | 25.0 % | | Wall transition length (Arachne setting) | 100.0 % | | Wall distribution count (Arachne setting) | 1 | | First layer minimum wall width (Arachne setting) | 85.0 % | | Minimum wall width (Arachne setting) | 85.0 % | | Minimum feature size (Arachne setting) | 25.0 % | | --- | --- | | Minimum wall length (Arachne setting) | 0.50 mm | | Walls and surfaces | | | Walls printing order | inner/outer | | Wall loop direction | Auto | | Top surface flow ratio | 1.00 | | Bottom surface flow ratio | 1.00 | | Only one wall on top surfaces | ✔ | | One wall threshold | 300.0 % | | Bridging | | | Bridge flow ratio | 0.95-1.05 | | Internal bridge flow ratio | 0.95-1.05 | | External bridge density | 100.0 % | | Internal bridge density | 100.0 % | | Thick internal bridges | ✔ | | Extra bridge layers (beta) | Disabled | | Filter out small internal bridges | Filter | | Bridge counterbore holes | None | | Overhangs | | | --- | --- | | Detect overhang walls | ✔ | Strength | Walls | | | --- | --- | | Wall loops | | | For pins and power elements of the structure, such as the vehicle frame, use 3 loop | | | Detect thin walls | | | Disabled for vehicles and ships, enabled for characters | | | Top/bottom shells | | | Top shell layers | 5 layers | | For 0,2 Layer Height | | | Top shell thickness | 1.00 mm | | Top surface density | 100 % | | Top surface pattern | Monotonic line | | Bottom shell layers | 5 layers | | For 0,2 Layer Height | | | Bottom shell thickness | 1.00 mm | | Bottom surface density | 100.0 % | | --- | --- | | Bottom surface pattern | Monotonic | | Top/Bottom solid infill/wall overlap | 25.0 % | | Infill | | | Sparse infill density | 5.0 % | | Fill Multiline | 1.00 | | Sparse infill pattern | Triangles | | Sparse infill direction | 45.0 ° | | Maximum lengt

FAQs

这份 Orca Slicer 2.0+ 切片参数适用于哪些打印场景？

文档针对 Hollow Knight Pure Vessel 模型给出 Orca Slicer 2.0+ 的详细推荐设置，并说明这些参数适用于多数情况，但仍需根据打印机、材料或具体零件进行调整。

文档中推荐的层高与首层高度范围是什么？

层高建议在 0.12-0.20 mm；获得更高质量建议 0.12 mm，快速打印可用 0.2 mm。首层高度建议为 0.20-0.28 mm。

哪些参数需要校准？

多处补偿与补边相关参数提示需要校准，例如 X-Y hole compensation、X-Y contour compensation 与 Elephant foot compensation 等均注明了校准范围与注意事项。

如果打印效果不理想，如何获得进一步帮助？

文档建议根据自身机器与条件对参数进行微调；在有疑问、建议或遇到问题时，可以联系 Gambody 支持团队获取帮助。

Aug 27, 2026

Upload by Skyler