Operation and Maintenance Manual - Safety Information - Product Link™ PLE702 Series

Oct 23, 2026

Uploaded by Riley

SEBU8832-26 (December 2021) Operation and Maintenance Manual for Cat® Product Link™ PLE702/PLE602 family and related systems provides safety and operational guidance. It emphasizes hazard recognition, correct authorization, and proper training before operating, lubricating, maintaining, or repairing. The manual explains the Safety Alert Symbol and signal words (DANGER, WARNING, CAUTION), highlights “NOTICE” items for preventing product damage, and clarifies that warnings may not cover every circumstance. It also notes that specifications and illustrations can change and directs users to obtain current information from Cat dealers.

LanguageEnglish

CategoryHealthcare

FormatPDF

Pages52

Reading Time2 h 11 min

AccessFree to download

Foreword

Literature Information

Safety

Operation

Important Safety Information

Safety Alert Symbol and Signal Words

NOTICE for Product Damage

SEBU8832-26 (en-us) December 2021 Operation and Maintenance Manual Product Link™ PLE702, PLE602, PLE602P, PLE601, PL671, PL641, PL641V2, PL631, PL631V2, PL542, PL542V2, PL243, PL241, PL240, PL240B, PL161, PL141, PL131, PL083, PL042, and PL444 Systems PL6 1-UP (Machine Control & Guidance Products) PL2 1-UP (Machine Control & Guidance Products) PL1 1-UP (Machine Control & Guidance Products) PL0 1-UP (Machine Control & Guidance Products) PL5 1-UP (Machine Control & Guidance Products) PL7 1-UP (Machine Control & Guidance Products) Language: Original Instructions Scan to access the latest service information, purchase additional media, and buy genuine Cat® parts. i07966018 Important Safety Information Most accidents that involve product operation, maintenance and repair are caused by failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing potentially hazardous situations before an accident occurs. A person must be alert to potential hazards, including human factors that can affect safety. This person should also have the necessary training, skills and tools to perform these functions properly. Improper operation, lubrication, maintenance or repair of this product can be dangerous and could result in injury or death. Do not operate or perform any lubrication, maintenance or repair on this product, until you verify that you are authorized to perform this work, and have read and understood the operation, lubrication, maintenance and repair information. Safety precautions and warnings are provided in this manual and on the product. If these hazard warnings are not heeded, bodily injury or death could occur to you or to other persons. The hazards are identified by the “Safety Alert Symbol” and followed by a “Signal Word” such as“DANGER”,“WARNING” or “CAUTION”. The Safety Alert “WARNING” label is shown below. The meaning of this safety alert symbol is as follows: Attention! Become Alert! Your Safety is Involved. The message that appears under the warning explains the hazard and can be either written or pictorially presented. A non-exhaustive list of operations that may cause product damage are identified by “NOTICE” labels on the product and in this publication. Caterpillar cannot anticipate every possible circumstance that might involve a potential hazard. The warnings in this publication and on the product are, therefore, not all inclusive. You must not use this product in any manner different from that considered by this manual without first satisfying yourself that you have considered all safety rules and precautions applicable to the operation of the product in the location of use, including site-specific rules and precautions applicable to the worksite. If a tool, procedure, work method or operating technique that is not specifically recommended by Caterpillar is used, you must satisfy yourself that it is safe for you and for others. You should also ensure that you are authorized to perform this work, and that the product will not be damaged or become unsafe by the operation, lubrication, maintenance or repair procedures that you intend to use. The information, specifications, and illustrations in this publication are on the basis of information that was available at the time that the publication was written. The specifications, torques, pressures, measurements, adjustments, illustrations, and other items can change at any time. These changes can affect the service that is given to the product. Obtain the complete and most current information before you start any job. Cat dealers have the most current information available. NOTICE When replacement parts are required for this product Caterpillar recommends using original Caterpillar® replacement parts. Other parts may not meet certain original equipment specifications. When replacement parts are installed, the machine owner/user should ensure that the machine remains in compliance with al

FAQs

Why must operators follow basic safety rules in this manual?

Most accidents during product operation, maintenance, or repair are caused by failing to observe basic safety rules. Many accidents can be avoided by recognizing hazardous situations in advance.

When is it allowed to perform lubrication, maintenance, or repair on the product?

Do not perform any lubrication, maintenance, or repair until you verify you are authorized and have read and understood the relevant operation, lubrication, maintenance, and repair information.

What do the Safety Alert Symbol and signal words mean?

The hazards are identified by the “Safety Alert Symbol” and followed by signal words such as “DANGER”, “WARNING”, or “CAUTION”. The warning text explains the hazard and may be shown in written or pictorial form.

Oct 23, 2026

Uploaded by Riley