Occupational Health and Safety Requirements - OH&S Concept and General Requirements - Responsibilities - Specific OH&S Requirements

Oct 23, 2026

This document sets Occupational Health and Safety requirements for contractors performing work at the ArcelorMittal Calvert LLC job site. It defines the OH&S concept, including safeguarding people and property and pursuing zero incidents, and it requires contractors to implement injury, illness, and property-damage prevention measures while maintaining a safe working environment. It also establishes general compliance obligations, pre-start expectations (including safety management system presentation and ISNetworld pre-qualification), drug- and alcohol-free controls, ISNetworld subscription and rating requirements, and contractor responsibilities for supervision, subcontractor compliance, and adherence to applicable federal and site rules.

LanguageEnglish

CategoryHealthcare

FormatPDF

Pages7

Reading Time18 min

AccessFree to download

1.0 OH&S Concept and General Requirements

1.1. Occupational Health and Safety Concept

1.2. General Requirements

1.3. ISNET Requirement

2.0 Responsibilities

2.1. Contractor supervision and performance responsibilities

2.2. Compliance by agents, subcontractors, and employees

2.3. Contractor specific responsibilities

ArcelorMittal Calvert LLC Occupational Health and Safety Requirements OCCUPATIONAL HEALTH AND SAFETY REQUIREMENTS Contents 1.0 OH&S Concept and General Requirements .................................................................................... 2 2.0 Responsibilities ................................................................................................................................. 3 3.0 Specific OH&S Requirements ........................................................................................................... 4 ArcelorMittal Calvert LLC Occupational Health and Safety 1.0 OH&S Concept and General Requirements 1.1. Occupational Health and Safety Concept 1.1.1. Contractor’s work or activities at or near the Job Site under the Contract must be executed or implemented in such a way to: (a) safeguard the health and safety of anyone that is, or potentially could be, impacted by Contractor’s work; and (b) to protect property (c) with the clear objective to achieve ZERO incidents. 1.1.2. Contractor shall implement measures and take any actions necessary to prevent injuries, occupational illness and property damage. Contractor shall maintain a safe working environment at all times, taking into consideration the following principles: 􀂾 Safety and health are core values, not only the highest priority 􀂾 Safety and health must take priority over all work or activities 􀂾 All incidents can be prevented and therefore avoided 1.2. General Requirements 1.2.1. ArcelorMittal Calvert LLC is referred to herein as “Owner.” Contractor shall fully comply with the requirements set forth in these Occupational Health and Safety Requirements and Owner’s Contractor Safety & Health Field Manual, all of which are subject to change or amendment from time to time, and with all federal, state and local statutes, regulations and standards regarding occupational health and safety which are applicable to the Job Site during the performance of the Contract. In the case of a conflict between the requirements in these Occupational Health and Safety Requirements and/or Owner’s Contractor Safety & Health Field Manual and the laws and regulations applicable to the Job Site, the more stringent shall be required. 1.2.2. Before the start of the work or activities under the Contract at the Job Site: 1.2.2.1. Contractor shall meet with Owner and present its safety management system and Contractor's implementation and methodologies to be established at the Job Site in order to achieve excellence in safety performance (including an overview of Contractor’s past safety philosophies and performance), and 1.2.2.2. Meet ISNetworld pre-qualification requirements. 1.2.3. Contractor must comply with, at a minimum, the standards established by law and the Contract. 1.2.4. Prior to performing any work or activities at the Job Site, Contractor must have a policy and controls implemented to provide and maintain a drug-free environment. Additionally, Contractor must ensure its employees while on the Job Site are not under the influence of alcohol or drugs. The possession of illegal or controlled substances and alcohol products are strictly prohibited on Owner's property, including all parking areas. 1.3. ISNET Requirement 1.3.1. Contractor agrees to maintain, at Contractor's expense, a subscription with ISNetworld ([www.ISNetworld.com](www.ISNetworld.com)) for the duration of the Contract. Contractor shall also furnish ArcelorMittal Calvert LLC Occupational Health and Safety ISNetworld with any information requested by ISNetworld in connection with ISNetworld's evaluation of the Contractor. 1.3.2. In the event that Contractor's ISNetworld rating falls below an A or B, Contractor shall promptly take all steps necessary to improve the rating so that an A is achieved and maintained. If the Contractor does not improve such rating to an A or B within 30 days after the issuance of the rating by ISNetworld,

FAQs

What is the primary OH&S objective contractors must pursue on the job site?

Contractor work must safeguard affected people and property and pursue the clear objective to achieve ZERO incidents.

What steps are required before starting work under the contract at the job site?

Contractors must meet the Owner, present their safety management system and implementation methodologies, and meet ISNetworld pre-qualification requirements before work begins.

What drug and alcohol controls are required for personnel on the job site?

Contractors must implement policies and controls to provide and maintain a drug-free environment, ensure employees are not under the influence of alcohol or drugs, and strictly prohibit illegal/controlled substances and alcohol products on Owner property, including parking areas.

Oct 23, 2026

Uploaded by notyourbestiee