MCC-OPS-1 - Operators Manual - MCC35 CAT 735 Specialty Haulage Solutions for Construction and Mining

Nov 4, 2026

Operators manual for the MEGA Container Carrier (MCC) system installed on the CAT 735. Covers safe operation requirements for current production systems, including manual usage guidance and definitions for warnings, cautions, and notes. Explains when “shall,” “will,” and “may” apply, and provides an MCC35 overview with a component list such as bed assembly, centering guides, twistlocks, tailgate restraints, lift cylinders, fenders, mud flaps, valve assemblies, hydraulic and electrical descriptions, plus abbreviations and section references.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages35

Reading Time1 h 28 min

AccessFree to download

Section 1. Definitions and Abbreviations

Section 2. System Description

Section 3. Normal Operations

Section 4. Appendix (Operators Checklist)

Manual Usage

Warning, Caution & Notes

Shall, Will, May

MCC35 Overview

Abbreviations

MCC35 Description and Usage

Body Assembly

Hydraulics

Controls & Indicating System

Theory of Operation

Lights & Accessories

Operators Manual MCC-OPS-1 SPECIALTY HAULAGE SOLUTIONS FOR CONSTRUCTION AND MINING MEGA CORP.® 700 Osuna Rd. N.E.• Albuquerque, NM 87113 • 1-800-345-8889 • 505-345-2661 • Fax 505-345-6190 [www.megacorpinc.com](www.megacorpinc.com) ® MEGA Corp. , Inc. All Rights Reserved Page Section 1. Definitions and Abbreviations .………………………………………………………. 1-1 Section 2. System Description ………………………………………………………………...… 2-1 Section 3. Normal Operations ……………………………………………………………………3-1 Section 4. Appendix (Operators Checklist)…………………………………………………… 4-1 Manual Usage …………………..………. 1-1 Warning, Caution & Notes ……….…...… 1-1 Shall, Will, May ……………………….. 1-1 MCC35 Overview …………………..… 1-2 Abbreviations ………………………...... 1-3 MANUAL USAGE This technical manual only contains information required to safely operate the MEGA Container Carrier (MCC) system when installed on the CAT 735. See the CAT 735 Operators Safety and Maintenance Manual for chassis specific system information and operating procedures. Only current production systems are covered in this manual. If your system is not covered in this manual please contact MEGA Corp. Product Support at: 1-800-345-8889 or visit our web site at [www.megacorpinc.com](www.megacorpinc.com) for more detailed information. WARNING, CAUTIONS AND NOTES The following definitions are found throughout the manual and apply as follows: Operating procedures and techniques, which could result in personal injury and/or loss of life if not carefully followed. Operating procedures and techniques, which could result in damage to equipment if not carefully followed. Operating procedures and techniques that are considered essential to emphasis. USE OF SHALL, WILL AND MAY Shall and Will – Used when application of a procedure is mandatory. Should – Used when application of a procedure is recommended. May - Used to indicate an acceptable or suggested means of accomplishment. MCC35 Overview 6 1 Bed Assembly 2 Centering Guides 3 Twistlocks 4 Tailgate Restraint Assembly 5 Lift Cylinders 6 Fenders 7 Mud Flaps 8 Tailgate Operation Valve Assembly 9 Twistlock Solenoid Manifold 10 In-Cab Twistlock Controls 11 Remote Body Operation Switches 12 Twistlock External Status Light 13 Amber Flashing Beacon 14 Tail Lights & Accessories 15 Clearance Lights ABBREVIATIONS CW – Clockwise ECM – Electronic Control Module ft-feet fpm – feet per minute IN/SQ FT – Inches per Square Feet ISO – International Organization of Standardization KM-H – Kilometers Hour Kg – kilograms LT – Left LWB – Long Wheel Base M – meters MCC – Mega Container Carrier MPH – Miles Per Hour OEM – Original Equipment Manufacture PPE – Personal Protective Equipment psi-pounds square inch RT – Right VDC – Volts Direct Current MCC35 Description and Usage …...…....... 2-1 Body Assembly ………………………….. 2-1 Hydraulics ……………………………….. 2-2 Controls & Indicating System …………… 2-5 Theory of Operation ………………….….. 2-9 Lights & Accessories …………………..... 2-10 MCC35 DESCRIPTION AND USAGE The MCC35 is designed to be attached to a long wheel base (LWB) chassis after required chassis reinforcements are completed. Once total integration is completed, the assembly can be used to mount, retain, transport, and dump a 20’ISO container. The MCC35 consists of a body assembly, hydraulics and electrical systems as well as a control system. The MCC35 is fully intergraded with the chassis hydraulics, electrics and control systems while adding additional in-cab controls, lighting, and indicating/warning systems. 2-1 BODY ASSEMBLY The assembly consists of a tubular frame, fenders and mud flaps, tailgate assembly and twistlock assemblies. The body also contains mounting plates for hydraulic components, sensors and accessories. Tubular Frame Constructed of tubular steel, cross tubes and plating to form a frame used to carry the weight of a loaded ISO container. The frame is se

FAQs

What systems are covered by this MCC35 operators manual?

Only current production MCC systems installed on the CAT 735 are covered. Systems not covered should be confirmed with MEGA Corp. Product Support.

How does the manual define “shall,” “will,” and “may”?

“Shall” and “will” indicate mandatory procedures. “Should” is used for recommended procedures, while “may” indicates acceptable or suggested means of accomplishment.

What are the main components included in the MCC35 body assembly?

The body assembly includes a tubular frame, fenders and mud flaps, tailgate restraint assembly (stinger), and twistlock assemblies, along with mounting plates for hydraulic components, sensors, and accessories.

Nov 4, 2026

Uploaded by Taylor Morgan