M1150 / M1155 - Sewing Machine Instruction Manual - Important Safety Instructions

Oct 23, 2026

Instruction manual for household sewing machines models M1150 and M1155, providing introduction and detailed operating guidance. Emphasizes important safety rules before and during use of an electrical appliance, including supervision requirements, prohibited play by children, and clear procedures for unplugging, cleaning, and servicing. Covers safe operation limits, handling of needles and moving parts, ventilation and obstruction avoidance, and emergency hazard precautions such as using proper needle plates, avoiding damaged components, and replacing damaged LED lamps or foot-control cords. Includes a table of contents outlining setup and sewing sections.

LanguageEnglish

CategoryHealthcare

FormatPDF

Pages24

Reading Time1 h 0 min

AccessFree to download

Introduction

Intended Use

Machine Overview

Top of Machine

Needle Area

Accessories

Included Accessories (Not Pictured)

Presser Feet

Stitch Overview

Preparations

Unpack the Machine

Connect to the Power Supply

Pack Away after Sewing

Free Arm/Removable Accessory Tray

Presser Foot Lifter

Thread Knife

Change the Presser Foot

Wind the Bobbin

Insert the Bobbin

Thread the Machine

Bring Up the Bobbin Thread

Needles

Important Needle Information

Selection Guide—Needle Size, Fabric, Thread

Change the Needle

Thread Tension

Select a Stitch

Reverse Sewing

Sewing

Start to Sew

INSTRUCTION MANUAL M1150 / M1155 IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using this household sewing machine. When using an electrical appliance, basic safety precautions should always be followed, including the following: Keep the instructions at a suitable place close to the machine. Make sure to hand them over if the machine is given to a third party. This appliance is intended for use by adults. The appliance can be used with adult supervision by (i) children aged from 8 to 12 years and (ii) persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children without supervision. It is not allowed for anyone to play with the machine. Children up to 8 years are not allowed to use the machine. WARNING –TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC SHOCK, OR INJURY TO PERSON: • A sewing machine should never be left unattended when plugged in. The electrical socket, to which the machine is plugged in should be easily accessible. Always unplug this sewing machine from the electric outlet immediately after using and before cleaning, removing covers, lubricating or when making any other user servicing adjustments mentioned in the instruction manual. • Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near children. • Use this sewing machine only for its intended use as described in this manual. Use only attachments recommended by the manufacturer as contained in this manual. • Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the sewing machine to the nearest authorized dealer or service center for examination, repair, electrical or mechanical adjustment. • Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sewing machine and foot control free from the accumulation oflint, dust, and loose cloth. • Keep fingers away from all moving parts. Special care is required around the sewing machine needle. • Always use the proper needle plate. The wrong plate can cause the needle to break. • Do not use bent needles. • Do not pull or push fabric while stitching. It may deflect the needle causing it to break. • Wear safety glasses. • Switch the sewing machine off (“0”) when making any adjustment in the needle area, such as threading needle, changing needle, threading bobbin, or changing presser foot, etc. • Never drop or insert any object into any opening. • Do not use outdoors. • Do not operate where aerosol (spray) products are being used or where oxygen is being administrated. • To disconnect, turn all controls to the off (“0”) position, then remove plug from outlet. • Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. • The foot control is used to operate the machine. Never place other objects on the foot control. • Do not use the machine if it is wet. • If the LED lamp is damaged or broken, it must be replaced by the manufacturer or its service agent or a similarly qualified person, in order to avoid a hazard. • If the cord connected with the foot control is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person, in order to avoid a hazard. For Overlock Machines only: • Never operate without a cutter cover or a securely installed coverstitch table. SAVE THESE INSTRUCTIONS TABLE OF CONTENTS INTRODUCTION ............................................. 4 Intended Use .................................................................. 4 Machine Overview .......................................................... 4 Top of Machine ......................................................

FAQs

Who is allowed to use the M1150/M1155 sewing machine?

The appliance is intended for adults, and it may be used with adult supervision for children aged 8 to 12 and for persons with reduced capabilities if they are instructed about safe use and hazards. Children under 8 are not allowed to use the machine.

What should you do before cleaning or servicing the sewing machine?

Unplug the sewing machine immediately after using and before cleaning, removing covers, lubricating, or making any other user servicing adjustments mentioned in the manual. To disconnect, turn all controls to the off (“0”) position and then remove the plug from the outlet.

What safety precautions are required when operating the machine?

Do not leave the sewing machine unattended when plugged in, keep ventilation openings clear of lint and dust, keep fingers away from moving parts and especially the needle area, and switch the machine off (“0”) when threading or changing needles, bobbins, or presser feet.

Oct 23, 2026

Uploaded by anakgang17