Lumenesse 8Mil-Clear Safety & Security - Hurricane Protection Window Film System

Aug 26, 2026

Upload by Mali

NOA approval documentation for the Lumenesse 8Mil-Clear safety & security hurricane protection window film system, component approval-series “Lumenesse 8Mil-Clear” Safety & Security Hurricane Protection Window Film System-S.MI. Issued under applicable rules for construction materials and reviewed/accepted by Miami-Dade County RER-Product Control for use in Miami-Dade County and other allowed jurisdictions. Specifies missile impact rating, required permanent labeling, approved drawing and test evidence, and conditions for renewal, termination, and inspection at job sites.

LanguageEnglish

CategoryHealthcare

FormatPDF

Pages5

Reading Time13 min

AccessFree to download

SCOPE

DESCRIPTION

APPROVAL DOCUMENT

MISSILE IMPACT RATING

LABELING

RENEWAL AND TERMINATION

ADVERTISEMENT AND INSPECTION

NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED

DRAWINGS

TESTS

Lumenesse Films,LLC1470 NW107 Avenue,Suite“O”.Miami,FL33172 ## SCOPE: This NOA is being issued under the applicable rules and regulations governing the use of constructionmaterials.The documentation submitted has been reviewed and accepted by Miami-Dade County RER-Product Control Section to be used in Miami Dade County and other areas where allowed by the AuthorityHaving Jurisdiction(AHJ) This NOA shall not be valid after the expiration date stated below.The Miami-Dade County Product ControlSection (In Miami Dade County)and/or the AHJ (in areas other than Miami Dade County)reserve the rightto have this product or material tested for quality assurance purposes.If this product or material fails toperform in the accepted manner,the manufacturer will incur the expense of such testing and the AHJ mayimmediately revoke,modify,or suspend the use of such product or material within their jurisdiction.RERreserves the right to revoke this acceptance,if it is determined by Miami-Dade County Product ControlSection that this product or material fails to meet the requirements of the applicable building code. This product is approved as described herein,and has been designed to comply with the Florida BuildingCode,including the High Velocity Hurricane Zone. DESCRIPTION:Component Approval-Series “Lumenesse 8Mil-Clear”Safety &Security Hurricane Protection Window Film System-S.MI. APPROVALDOCUMENT:Drawing No.12-777,titled "Hurricane Protection Window Film System,"sheets 1/2 and 2/2 of2,dated 01/23/12,prepared by E.C.&Associates,Inc.,signed and sealed by EmilioCastro,P.E.,bearing the Miami-Dade County Product Control Approval stamp with the Notice ofAcceptance number and approval date by the Miami-Dade County Product Control Section. MISSILE IMPACT RATING:Small Missile Impact Resistant LABELING:Each unit shall bear a permanent label with the manufacturer's name or logo,city,state,model/series,and following statement:"Miami-Dade County Product Control Approved",unless othervisenoted herein. RENEWAL of this NOA shall be considered after a renewal application has been filed and there has beenno change in the applicable building code negatively affecting the performance of this product. TERMINATION of this NOA will occur after the expiration date or if there has been a revision or changein the materials,use,and/or manufacture of the product or process.Misuse of this NOA as an endorsementof any product,for sales,advertising or any other purposes shallautomatically terminate this NOA.Failureto comply with any section of this NOA shallbe cause for termination and removal of NOA. ADVERTISEMENT:The NOA number preceded by the words Miami-Dade County,Florida,andfollowed by the expiration date may be displayed in advertising literature.If any portion of the NOA isdisplayed,then it shall be done in its entirety. INSPECTION:A copy of this entire NOA shall be provided to the user by the manufacturer or itsdistributors and shall be available for inspection at thejob site at the request of the Building Official.This NOA consists of this page l and evidence pages E-1 and E-2,as well as approval document mentionedabove. The submitted documentation was reviewed by Manuel Perez,P.E. 0 A. B. ## NOTICE OF ACCEPTANCE:EVIDENCE SUBMITTED DRAWINGS 1.Manufacturer's die drawings and sections. 2.Drawing No.12-777,titled “Storm Protection Window Film System”Sheets 1/2 and2/2 of 2,dated 01/23/12,prepared by E.C.&Associates,Inc.,signed and sealed byEmilio Castro,P.E. TESTS 1. Test reports on:1)Air Infiltration Test,per FBC,TAS 202-94 2)Uniform Static Air Pressure Test,Loading per FBC,TAS 202-94 3)Water Resistance Test,per FBC,TAS 202-94 4)Small Missile Impact Test per FBC,TAS 201-94 5)Cyclic Wind Pressure Loading per FBC,TAS 203-94 along with marked-up drawings and installation diagram of an aluminum fixedwindow with 14”tempered glass with a “Lumenesse”two-ply 8 mil film on the interiorwith the perimeter sealed to the wind

FAQs

What is the scope and approved use jurisdiction for this NOA?

The NOA applies under construction material rules and is reviewed/accepted for use in Miami-Dade County and other areas allowed by the Authority Having Jurisdiction (AHJ).

What product description and series are approved?

The document approves component approval-series “Lumenesse 8Mil-Clear” Safety & Security Hurricane Protection Window Film System-S.MI. It references an approved hurricane protection window film system and associated approval documentation.

What are key conditions for renewal, termination, and labeling?

Renewal requires filing after a renewal application and no negative building-code changes affecting performance. Termination occurs after the expiration date or upon revisions/changes to materials, use, or manufacture; misuse also terminates it. Each unit must carry a permanent label with specified manufacturer and product details and the statement “Miami-Dade County Product Control Approved.”

Aug 26, 2026

Upload by Mali