Loop-O9400R - CCPA-v14 - Features

Sep 10, 2026

Upload by Miles

Loop-O9400R delivers a standards-compliant, high-density SDH/SONET add-drop and ADM/TM rack system with full T1/E1 cross-connect capability. It supports VCn cross-connect capacity up to 15Gbps bidirectional non-blocking and PTN switching up to 100Gbps bidirectional non-blocking, with modular hot-swappable cross-connect, tributary and power modules. The platform provides extensive protection (CCPA, MSP 1+1, SNCP/UPSR, ERPS, link aggregation, linear protection under 50ms) plus synchronized timing via SyncE, IEEE 1588 and TDM clocks. Management includes console/VT100, SNMP v1/v3, Telnet, SSH, Radius and TMN/FCAPS centralized EMS/iNMS over DCC channel.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages15

Reading Time38 min

AccessFree to download

Features

Cross-connect and switching capacity

Modular design and interfaces

Protection and protection switching

Timing sources and synchronization

Management and OAM&P

Description

Add-and-drop and tributary support

Migration from SDH/SONET to PTN

OAM&P functionality and TMN management

Ordering Information

Loop-O9400R PTN/SDH/SONET ADM/TM (CHPA chassis & CCPA Controller) Features • 6U height, full front access (ETSI) shelf support up to 2.5G Mbps backplane • SDH/SONET VCn/VTn Cross-Connect Capacity: 15Gbps bidirectional non-blocking • PTN (CE and MPLS-TP) Switching Capacity: 100Gbps bidirectional non-blocking • Modular design, Hot-swappable cross-connect modules, tributary modules , SFP and SFP+ optical • Hot-swappable cross-connect modules, tributary modules and power modules • Temperature-controlled fan tray • Aggregate cross-connect modules (controller modules) - Up to STM-1/4/16 (OC-3/12/48) aggregate lines with software configuration (CCPA) • Tributary modules: 8 tributary slots - Two ports STM-1 (OC-3) or One port STM-4 (OC-12) module - Three ports E3/T3 module - 16/32/63 ports E1/T1 tributary module - One port STM-16 (OC-48) - 8GE tributary module with L2 switch - PTN10G module (Three 10G or Eight 1G ports) - PTNext (One 10G or Ten 1G ports) • DC Power Module (-40 to-72 Vdc) , 500W - Dual power (1+ 1) protection • Protection - Controller cross-connect unit (CCPA) protection, MSP (1+1), SNCP/UPSR Ring - Tributary protection ▪ E1/T1: Card/Port (1:1) using Y-box, Line (1+1) ▪ E3/T3: Line (1+1) ▪ B155/622: MSP, SNCP/UPSR ▪ B2G5: MSP ▪ Ethernet: Card protection ▪ PTN Switch Fabric 1:1 • Network Protection ▪ MSP 1+1 ▪ SNCP/UPSR ▪ Ethernet Ring Protection (ERPS G.8032) ▪ Link Aggregation (Inter and Intra board) ▪ LSP Linear Protection (1+1/1:1) sub 50ms • External/Internal/Line timing source with SSM ▪ SyncE ▪ IEEE 1588 ▪ TDM clocks • TM, ADM, and cross-connect • Full cross-connect at VC11/VC12/VC3/VC4 levels • Support framed and unframed VC4-4 and VC4-4c • External/Internal/Line timing source with SSM • Ethernet supports GFP, LAPS, VCAT, BCP, LCASand non-LCAS • Management - Console port, VT100 menu-driven - SNMP port: Both v1 and v3 supported - Telnet, SSH, and Radius - Centralized management with Loop’s EMS/iNMS over DCC channel - Loop-iNET GUI Element Management System - TMN management (Loop-iNMS) with full FCAPS and end-to-end circuit management • RoHS compliant Description The Loop-O9400R is a standards-compliant high density SDH/SONET/ADM/TM with a full T1/E1 cross-connect rack system. The O9400R has full add-and-drop capability according to the figures below: - 1 STM-16 tributaries - 4 STM-4 tributaries - 16 STM-1 tributaries - 24 E3/T3 tributaries - 504 E1/T1 tributaries - 64 10/100/1000M Ethernet EoS tributaries - 6 10GbE and 16 1GbE tributaries - 1 10GbE or 10 1 GbE (PTNext) tributaries With up to 4 STM-1/4/16 (OC-3/12/48) aggregate interfaces on cross-connect modules and 16 STM-1 (OC-3) interfaceson tributaries, the Loop-O9400R offers the service provider a versatile protection scheme including SNCP (UPSR), and MSP (1+1) protection for network topology. Path protection switching can be automatically or manually activated through a management system. With the PTN10G interface card, the O9400R can transport SDH/SONET over PSN network. With O9400R as a gateway between SDH/SONET and PTN, existing SDH/SONET network users will be able to migrate from SDH/SONET/PDH to PTN network smoothly and seamlessly. All interfaces are fully compliant with the relevant ETSI standards and ITU recommendations. The Loop-O9400R provides powerful Operation, Administration, Maintenance and Provisioning (OAM&P) functionality, including fault management, performance monitoring, configuration management, and network security management. Through a console port, OAM&P can be achieved both locally and remotely via SNMP or menu-driven interfaces. The Loop-O9400R provides a complete set of operation interfaces that are consistent with the Telecommunication Management Network (TMN) concept (ITU Recommendation M.30, G.784) for SDH/SONET Network Element/Operations System (NE/OS), NE/NE, and NE/Craft communications. Use

FAQs

What key cross-connect capacities does Loop-O9400R support?

It offers SDH/SONET VCn/VTn cross-connect capacity of 15Gbps bidirectional non-blocking and PTN (CE and MPLS-TP) switching capacity up to 100Gbps bidirectional non-blocking.

How does Loop-O9400R handle network protection?

It supports controller cross-connect unit (CCPA) protection, MSP (1+1), SNCP/UPSR ring protection, Ethernet ring protection (ERPS G.8032), link aggregation, and linear protection (1+1/1:1) with switching under 50ms.

What management and operation interfaces are available?

Management includes a console port with VT100 menu-driven access, SNMP (v1 and v3), Telnet, SSH and Radius, plus centralized EMS/iNMS GUI management over the DCC channel with full FCAPS and end-to-end circuit management.

Sep 10, 2026

Upload by Miles