LM158/LM258/LM358/LM2904 Low Power Dual Operational Amplifiers - Datasheet

Nov 1, 2026

Uploaded by Ivy

Low power dual operational amplifiers LM158/LM258/LM358/LM2904 are presented with single-supply operation across wide voltages and compatibility with split supplies when needed. Key performance highlights include internally frequency-compensated unity gain behavior, high DC gain (100 dB), 1 MHz unity-gain bandwidth, very low supply current (500 µA), and low input offset voltage (2 mV). The devices support input common-mode including ground and output swing to ground, with temperature-compensated unity-cross frequency and bias current, enabling battery-suitable, GND-near sensing applications.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages33

Reading Time1 h 23 min

AccessFree to download

Features

Unique characteristics

Advantages

Description

Absolute maximum ratings

LM158-N, LM258-N, LM2904-N, LM358-N [www.ti.com](www.ti.com) SNOSBT3H –JANUARY 2000–REVISED MARCH 2013 LM158/LM258/LM358/LM2904 Low Power Dual Operational Amplifiers Check for Samples: LM158-N, LM258-N, LM2904-N, LM358-N FEATURES • Available in 8-Bump DSBGA ChipSized Package,(See AN-1112 (SNVA009)) • Internally Frequency Compensated for Unity Gain • Large DC Voltage Gain: 100 dB • Wide Bandwidth (Unity Gain): 1 MHz (Temperature Compensated) • Wide Power Supply Range: – Single Supply: 3V to 32V – Or Dual Supplies: ±1.5V to ±16V • Very Low Supply Current Drain (500 μA)—Essentially Independent of Supply Voltage • Low Input Offset Voltage: 2 mV • Input Common-Mode Voltage Range Includes Ground • Differential Input Voltage Range Equal to the Power Supply Voltage • Large Output Voltage Swing UNIQUE CHARACTERISTICS • In the Llinear Mode the Input Common-Mode Voltage Range Includes Ground and the Output Voltage Can Also Swing to Ground, even though Operated from Only a Single Power Supply Voltage. • The Unity Gain Cross Frequency is Temperature Compensated. • The Input Bias Current is also Temperature Compensated. ADVANTAGES • Two Internally Compensated Op Amps • Eliminates Need for Dual Supplies • Allows Direct Sensing Near GND and VOUT Also Goes to GND • Compatible with All Forms of Logic • Power Drain Suitable for Battery Operation DESCRIPTION The LM158 series consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. Application areas include transducer amplifiers, dc gain blocks and all the conventional op amp circuits which now can be more easily implemented in single power supply systems. For example, the LM158 series can be directly operated off of the standard +5V power supply voltage which is used in digital systems and will easily provide the required interface electronics without requiring the additional ±15V power supplies. The LM358 and LM2904 are available in a chip sized package (8-Bump DSBGA) using TI's DSBGA package technology. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODProduUctCsTcIONonforDATAm to sinformapecificiontioniss cpurrerenthteasteof prmsulifcathtnTax. Copyright © 2000–2013, Texas Instruments Incorporated Instruments standard warranty. Production processing does not necessarily include testing of all parameters. LM158-N, LM258-N, LM2904-N, LM358-N SNOSBT3H –JANUARY 2000–REVISED MARCH 2013 [www.ti.com](www.ti.com) Voltage Controlled Oscillator (VCO) These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. 2 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated Product Folder Links: LM158-N LM258-N LM2904-N LM358-N LM158-N, LM258-N, LM2904-N, LM358-N [www.ti.com](www.ti.com) SNOSBT3H –JANUARY 2000–REVISED MARCH 2013 ABSOLUTE MAXIMUM RATINGS (1) (2) | | | LM158/LM258/LM358
LM158A/LM258A/LM3 58A | LM2904 | | --- | --- | --- | --- | | Supply Voltage, V+ | | 32V | 26V | | Differential Input Voltage | | 32V | 26V | | Input Voltage | | −0 .3V to +32V | −0 .3V to +26V | | Power Dissipation(3) | | | | | PDIP (P) | | 830 mW | 830 mW | | TO-99 (LMC) | | 550 mW | | | SOIC (D) | | 530 mW | 530 mW | | DSBGA (YPB) | | 435mW | | | Output Short-Circuit to GND (One Amplifier)(4) | V+ ≤ 15V and TA = 25°C | Continuous |

FAQs

What are the main performance features of the LM158/LM258/LM358/LM2904 devices?

They are low power, dual operational amplifiers with unity-gain frequency compensation, 100 dB DC gain, and about 1 MHz unity-gain bandwidth. They also target low input offset voltage and very low supply current drain.

How do these op amps work with single-supply systems?

They are designed to operate from a single power supply over a wide voltage range. The input common-mode voltage range includes ground, and the output voltage can swing to ground even with a single supply.

What limitations are specified under absolute maximum ratings?

The document lists maximum supply voltage, differential input voltage, input voltage limits, power dissipation by package, short-circuit behavior, and operating/storage temperature ranges. It also notes the need for derating at high temperatures and cautions against output-to-ground short circuits that can overheat and damage the device.

Nov 1, 2026

Uploaded by Ivy