Light My Bricks - LEGO Stranger Things - The Upside Down 75810 Lighting Kit - Installation Instructions

Aug 27, 2026

Upload by Miles

Lighting-kit installation instructions for the Light My Bricks LEGO Stranger Things – The Upside Down (75810) LED set. Covers step-by-step placement of multiple bit lights and strip-light components, detailed guidance for routing cables between studs, and cautions to avoid forcing connections that could damage wiring or overheat boards. Includes package contents, connector orientation rules for expansion boards and strip lights, setup and power-on testing using a CR2032 battery pack, plus mounting with adhesive squares.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages108

Reading Time4 h 32 min

AccessFree to download

Package Contents

LEGO Pieces

Important Notes

Installation Steps

Step 1: Mike

Step 2: Lucas

Step 3: Platform and Expansion Board Power Test

Step 4: Mounting with Adhesive Squares

Troubleshooting Guidance

Light My Bricks: LEGO Stranger Things – The Upside Down 75810 Lighting Kit The following page is the instructions for the Light My Bricks LEGO Stranger Things: The Upside Down (75810) LED light kit. If you run into any issues, please refer to the online troubleshooting guide. To ensure a trouble-free installation of your light kit, please read and follow each step carefully. These instructions can be downloaded in PDF format here Please note: This page lists instructions for the LED light kit only. If you are wishing to purchase the Light My Bricks LEGO Stranger Things – The Upside Down (75810) LED light kit , please click here to view the product page Package Contents: 11x White 15cm Bit Lights 1x White 30cm Bit Light 9x Green 30cm Bit Lights 1x Blue 30cm Bit Light 1x Pink 30cm Bit Light 2x Warm White Strip Lights 2x Glitter Effects Light Strings 3x 6-Port Expansion Boards 2x 8-Port Expansion Boards 1x Multi Effects Board 1x Sequence Effects Board 1x Scary Flicker Effects Board 1x Glitter Effects Board 3x 5cm Connecting Cables 5x 15cm Connecting Cables 2x 50cm Connecting Cable 8x Adhesive Squares 1x USB Power Cable 2x Flat Battery Pack (requires 2x CR2032 Batteries each pack) LEGO Pieces: 2x Trans Clear Plate 1×1 2x Trans Red Plate 1×1 3x Trans Clear Round Plate 1×1 1x Trans Clear Plate w Rounded Bottom 2×2 Important things to note: Laying cables in between and underneath bricks Cables can ﬁt in between and underneath LEGO® bricks, plates, and tiles providing they are laid correctly between the LEGO® studs. Do NOT forcefully join LEGO® together around cables; instead ensure they are laying comfortably in between each stud. CAUTION: Forcing LEGO® to connect over a cable can result in damaging the cable and light. Connecting cable connectors to Expansion Boards Take extra care when inserting connectors to ports of Expansion Boards. Connectors can be inserted only one way. With the expansion board facing up, look for the soldered “=” symbol on the left side of the port. The connector side with the wires exposed should be facing toward the soldered “=” symbol as you insert into the port. If a plug won’t ﬁt easily into a port connector, do not force it. Incorrectly inserting the connector can can result in bent pins inside the port or possible overheating of the expansion board when connected. Connecting cable connectors to Strip Lights Take extra care when inserting connectors to ports on the Strip Lights. Connectors can be inserted only one way. With the Strip Light facing up, ensure the side of the connector with the wires exposed is facing down. If a plug won’t ﬁt easily into a port connector, don’t force it. Doing so will damage the plug and the connector. Connecting Micro Cable connectors to Micro Expansion Board Ports Take extra care when inserting the micro connectors to micro ports of Micro Expansion Boards. Connecting Micro Bit Lights to Micro Expansion Boards is similar to connecting lights and cables to Strip Lights. With the expansion board facing up, ensure the side of the connector with the wires exposed is facing down. If a plug won’t ﬁt easily into a port connector, do not force it. Use your ﬁngernail to push the plastic part of the connector to the micro port. Installing Bit Lights under LEGO® bricks and plates. When installing Bit Lights under LEGO® pieces, ensure they are placed the correct way up (Yellow LED component exposed) . You can either place them directly on top of LEGO® studs or in between. OK, Let’s Begin! 1.) The ﬁrst section we will light up are the main characters on their “Stranger Things” platform. First, disconnect Mike, then disassemble his ﬂash light. Take a White 15cm Bit Light and place it over the hilt’s stud. Secure it in place by reconnecting the trans clear round plate 1×1 over the top. Fold the Bit Light cable down toward the bottom of the hilt, then reconnect it to Mike

FAQs

What should be avoided when routing cables under LEGO bricks?

Do not force LEGO pieces to join over a cable. Cables should sit comfortably between LEGO studs, plates, and tiles when laid correctly.

How can I prevent damage when connecting cable connectors to expansion boards?

Insert connectors only one way. With the expansion board facing up, align the connector so the wires-exposed side faces toward the soldered “=” symbol. Do not force plugs that do not fit easily.

What should I do if the lights do not work after powering on?

Test by using a different port on the expansion board to determine whether the fault is with the light or the expansion board. For expansion-board port issues, consult the online troubleshooting guide section.

Aug 27, 2026

Upload by Miles