LBS300-5S - 3-SIDED LINEAL BRUSH SANDER - Specifications

Aug 25, 2026

Upload by Aria

LBS300-5S 3-sided lineal brush sander is designed for sanding linear profiled material on three sides, delivering consistent feeding and controlled surface finishing. The centralized control panel places start/stop controls and inverter VFD variable-speed adjustments for side and top brush sanding heads. Powered feed rollers and adjustable spring-loaded hold-down rolls support stable throughput, while dust ports and adjustable head angles optimize removal and sanding performance. Feature set includes abrasive/brush head kits and selectable grit ranges.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages2

Reading Time5 min

AccessFree to download

Control Panel

Powered Feed Rolls

Side and Abrasive Brush Sanding Heads

Features and Specifications

LBS300-5S 3-SIDED LINEAL BRUSH SANDER PMB \#104 1124 Fir Avenue Blaine, WA 98230 T: 1.888.982.2683 F: 604.540.1780 Youtube // @CantekMachinery Twitter // @CantekMachinery [www.cantekamerica.com](www.cantekamerica.com)[ ](www.cantekamerica.com)[sales@cantekamerica.com](sales@cantekamerica.com) CONTROL PANEL All machine controls are centrally located for operator convenience. Individual start/stop controls for side heads, top heads, and feed. Inverter controls for side heads & top heads for optimum finish results. LSB300-5S 3-SIDED LINEAL BRUSH SANDER POWERED FEED ROLLS Full width bottom powered feed rollers with adjustable spring loaded top hold down rolls ensure consistent feeding through the machine. (3) SIDE HEADS Fully adjustable side heads can be set for optimum sanding results. Individual dust ports on each head for proper dust removal. ABRASIVE BRUSH SANDING HEADS Comes with a complete set of abrasive/ brush sanding heads. Simple and convenient replacement of the brush wear strip with a wide range of sanding grits available. FEATURES SPECIFICATIONS • Capable of sanding linear profiled material on 3 sides • The Main Frame is fabricated of heavy steel plate and ribbed to minimize vibration and deflection. • Centralized Control Panel for operator convenience. Clearly Identified & colour coded push buttons simplifying setup & operation • Variable Speed Adjustment by Inverter VFD’s to all Brush Sanding Heads (200-1200 RPM) • (2) Sets of Top Brushing Sanding Heads – with working height adjusted by handwheel and can be set on an angle • (1) Left Side Brush Sanding Head is adjustable up/down, in/out and can be set on an angle • (1) Right Side Brush Sanding Head which can be adjusted up/down and in and out and can be set on an angle • (1) Additional Left Side Sanding Head is adjustable up/down, in/out, and can be set on an angle • Top Press Rolls Working Height adjusted by hand wheel. • Brushing head consists of cleaning brush units and abrasive cloth units. The dovetail pocket design allows for easy abrasive/brush replacement. • Comes with (1) set of abrasives and brushes for each head. (Grit of the Sanding Head to be determined by you as desired) • The Abrasive Sanding Strips are available 100,120,180,240, 320 or 400 grit as desired (an example idea is 240 grit before painting & 320 grit for sealer sanding) Max. working Width Max. working height [Min. work-pieces](Min. work-pieces) length [Min. work-pieces](Min. work-pieces) thickness Feed speed (Variable) Speed of Sanding Heads Top Brush Head Motors Left Brush Head Motor Right Brush Head Motor Left (Angling) Brush Head Motor Conveyor motor Moving brush head motor Machine dimension (LxWxH) Packing dimension (LxWxH) Net weight Gross weight 11" (280mm) 4" (100mm) 33" (840mm) 3/8" (9 .5mm) 6.5 ~ 30 FPM (2~9 M/min) 200 ~ 1200 RPM 2 x 3/4 HP (2 x .55KW)(2 x 3.6”-90mm dust ports) 1 x ½ HP (1 x 0 .37KW)(3 .6”-90mm dust port) 1 x ½ HP (1 x 0 .37KW)(3 .6”-90mm dust port) 1 x ½ HP (1 x 0 .37KW)(2 .5”-63mm dust port)¼ HP (0 . 18KW) 1/3 HP (0 .25KW) 138”x40x 62301x” 1550mm) 120”x50x01640x” 1630mm) 750 LBS (340 KGS) 1035 LBS (470 KGS) PMB \#104 1124 Fir Avenue Blaine, WA 98230 T: 1.888.982.2683 F: 604.540.1780 Youtube // @CantekMachinery Twitter // @CantekMachinery [www.cantekamerica.com](www.cantekamerica.com)[ ](www.cantekamerica.com)[sales@cantekamerica.com](sales@cantekamerica.com)

FAQs

What sanding capability does the LBS300-5S provide?

It sands linear profiled material on three sides. The configuration includes side heads and a top head for controlled finishing.

How is the sanding speed controlled?

Variable speed adjustment is provided by inverter VFDs to the brush sanding heads, with a specified range of 200–1200 RPM.

What mechanisms help ensure consistent feeding?

Full-width bottom powered feed rollers with adjustable spring-loaded top hold-down rolls maintain consistent feeding through the machine.

What abrasive/brush options are included and how are they replaced?

The unit comes with a complete set of abrasive/brush sanding heads and includes abrasives and brushes for each head. The dovetail pocket design supports simple replacement of the abrasive/brush wear strips.

Aug 25, 2026

Upload by Aria