Installation - PowerView Designer Roller Screen Shades - Getting Started, Installation, Operation, Care

Nov 4, 2026

Instruction booklet for Hunter Douglas Designer Roller and Screen Shades with PowerView Automation. Covers getting started, product views for Standard, Cassette, Fascia, Pocket, and Dual Roller shade configurations, and lists required tools, fasteners, and compatible mounting hardware. Provides an installation overview with step-by-step procedures for installing brackets, installing the shade, and connecting the power source. Includes operation guidance such as testing, using the PowerView remote, resetting, adjusting limits, and care steps for troubleshooting, removing, and cleaning. Includes declarations and consumer support contact information.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages36

Reading Time1 h 31 min

AccessFree to download

Getting Started

Product View—Standard and Cassette Shades

Product View—Fascia and Pocket Shades

Product View—Dual Roller Shade

Tools and Fasteners Needed

Installation

Installation Overview

STEP 1—Install the Brackets

STEP 2—Install the Shade

STEP 3—Connect the Power Source

Operation

Testing the Shade

Using the PowerView Remote

Reset the Shade (If Necessary)

Adjust Shade Limits (If Necessary)

Install the Standard Bracket Cover (If Ordered)

Install the Fascia Panel

Install the Pocket Bottom—Pocket Shades Only (Optional)

Care

Troubleshooting

Removing the Shade

Cleaning Procedures

Declarations

Installation • Operation • Care Designer Roller & Designer Screen Shades, and Alustra® Woven Textures® Roller Shades with PowerView® Automation for Standard, Cassette, Fascia, Pocket, and Dual Roller GETTING STARTED Product View—Standard and Cassette Shades ............................. 3 Product View—Fascia and Pocket Shades ..................................... 4 Product View—Dual Roller Shade .................................................. 5 Tools and Fasteners Needed ............................................................. 6 INSTALLATION Installation Overview ......................................................................... 7 STEP 1—Install the Brackets .......................................................... 7 STEP 2—Install the Shade ............................................................ 18 STEP 3—Connect the Power Source ............................................ 21 OPERATION Testing the Shade ............................................................................ 25 Using the PowerView® Remote ...................................................... 25 Reset the Shade (If Necessary) ....................................................... 27 Adjust Shade Limits (If Necessary) ................................................. 28 Install the Standard Bracket Cover (If Ordered) .............................. 29 Install the Fascia Panel .................................................................... 30 Install the Pocket Bottom—Pocket Shades Only (Optional) ......... 30 CARE Troubleshooting ............................................................................... 31 Removing the Shade ........................................................................ 33 Cleaning Procedures ........................................................................ 34 DECLARATIONS...................................................................... 35 Questions? Call the Hunter Douglas Consumer Support Center at 1-888-501-8364. © 2020 Hunter Douglas. All rights reserved. All trademarks used herein are the property of Hunter Douglas or their respective owners. Product View—Standard and Cassette Shades Satellite Battery Pack Cover Bracket Cover (Optional) Idle Bracket Installation Screws Idler Assembly End Standard—M Bracket Shown Cap Extension Cable Battery Wand Motor Bracket Bracket Cover (Optional) End Cap Motor Assembly Cassette Cassette Installation Brackets Battery Wand Clip Battery Wand Programming Button Outside Mount Spacer Blocks Power Cable Bottom Bar Bottom Bar Product View—Fascia and Pocket Shades Idler Assembly Idle Bracket Fascia Motor Bracket Motor Assembly End Cap (Optional) End Cap Bottom Bar End Cap Tape Satellite Battery Pack Cover Battery Wand Extension Cable Idle-Side Installation Pocket Bracket End Cap Pocket Bottom Pocket End Cap Pocket End Cap Motor Assembly Programming Button Product View—Dual Roller Shade Satellite Battery Pack Cover x2 Extension Cable x2 ~~ ~~ Battery Wand x2 Motor Bracket Motor Assembly Idler Assembly Idle Bracket Installation Screws End Cap Bottom Bar Thank you for purchasing Hunter Douglas Designer Roller and Screen Shades with PowerView® Automation. With proper installation, operation, and care, your new shades will provide years of beauty and performance. Please thoroughly review this instruction booklet and the enclosed packing list before beginning the installation. Tools and Fasteners Needed ■ Flat blade and Phillips screwdrivers ■ Level (laser level is recommended) ■ Measuring tape and pencil ■ Standard M and Cassette shades. Power drill, 3∕32" drill bit and a 1∕4" hex driver. ■ Standard L, Fascia and Dual Roller shades. Power drill, 1∕8" drill bit, and 5∕16"hex driver. In addition, you will need fasteners designed to work with your specific mountin

FAQs

What are the main steps to install PowerView Designer Roller or Screen shades?

Install the brackets and attach additional components, install the shade, then connect the power source. The booklet structures installation into STEP 1, STEP 2, and STEP 3 to guide the process.

Which product variations are covered in the instruction booklet?

It includes product views and guidance for Standard and Cassette, Fascia and Pocket, and Dual Roller shade types. It also notes specific components shown in each configuration.

What operation tasks are addressed after installation?

The booklet covers testing the shade, using the PowerView remote, resetting the shade if necessary, and adjusting shade limits if necessary. It also includes optional accessory installations like bracket covers, the fascia panel, and pocket bottom components.

Nov 4, 2026

Uploaded by The weather in my hometown