Hyster Lift Truck Operating Manual - Operator Training, Safety, and Technical Specifications

Q: What training does the manual require before an operator uses the lift truck?

The manual requires training in proper operation, understanding workplace hazards, understanding equipment capabilities and limitations, and learning the construction and maintenance needs. A qualified person must guide a new operator through driving and load handling steps before independent operation.

Q: Who is responsible for ensuring safe operator operation?

The employer is responsible for ensuring the operator can see, hear, and has the physical and mental ability to operate the equipment safely.

Q: What technical operating limits are stated for atmospheric conditions?

The manual specifies average continuous-duty temperature as +25°C, maximum short-term temperature up to +40°C, lowest indoor condition temperature +5°C, lowest outdoor condition temperature −20°C, altitude up to 2000 m, and relative humidity from 30% to 95% (non-condensing).

Oct 23, 2026

Upload by naya.afterrain

Hyster lift truck operating manual provides original instructions for safe and efficient use, emphasizing that operation requires trained, alert operators who understand hazards, equipment capabilities and limitations, and the maintenance needs of the truck. The manual includes guidance on employer responsibility, qualified-person training before independent operation, and availability of a comprehensive training program. It also states legal and regulatory notes, machine safety warnings, noise and vibration emission levels, atmospheric operating conditions, and disposal caution for lubricants and fluids.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages166

Reading Time6 h 58 min

AccessFree to download

Foreword

Operator training responsibilities

Regulatory and safety information

Noise and vibration levels

Human vibration values

Hazardous atmosphere guidance

Atmospheric conditions

Lifting guidance

OPERATING MANUAL H2.0-3.5UT / H40-H70UT (A3C1) Internal Combustion Counterbalanced Forklift Truck DO NOT REMOVE THIS MANUAL FROM THIS UNIT PART NO. 4259243 8/23 LIFT TRUCK MODEL ENGINE MODEL TRANSMISSION TYPE MAST LIFT HEIGHT CARRIAGE TYPE DRIVE TIRE SIZE SERIAL NUMBER SERIAL NUMBER SERIAL NUMBER GROUP NUMBER GROUP NUMBER STEERING TIRE SIZE SPECIAL EQUIPMENT OR ATTACHMENTS © Hyster Company 2023. All Rights Reserved. HYSTER, , FORTENS, and MONOTROL are Registered Trademarks of Hyster-Yale Group, Inc. DURAMATCH, UNISOURCE, AND are Trademarksin the United States and certain other jurisdictions. Foreword To OWNERS, USERS, and OPERATORS: The safe and efficient operation of a lift truck requires skill and alertness on the part of the operator. To develop the skill required, the operator must: • Receive training in the proper operation of THIS lift truck. • Understand any potential hazards that may exist in the work place where the lift truck is intended to be used. • Understand the capabilities and limitations of the lift truck. • Become familiar with the construction of the lift truck and see that it is maintained in good condition. • Read and properly understand the warnings, instructions, and operating procedures in this manual. In addition, a qualified person, experienced in lift truck operation, must guide a new operator through several driving and load handling operations before the new operator attempts to operate the lift truck alone. It is the responsibility of the employer to make sure that the operator can see, hear, and has the physical and mental ability to operate the equipment safely. NOTE: A comprehensive operator training program is available from Hyster Company. For further details, contact your dealer for Hyster lift trucks. This Operating Manual is the original instruction and contains information necessary for the operation and maintenance of a basic lift truck. Optional equipment is sometimes installed that can change some operating characteristics described in this manual. Make sure the necessary instructions are available and understood before operating the lift truck. Some of the components and systems described in this Operating Manual will NOT be installed on your unit. If you have a question about any item described, contact your dealer for Hyster lift trucks. ©HYSTER COMPANY 2023 4259243-ENGLISH-UK 1 The following additional information is provided as specified in Machinery Directive 98/37 EC and/or 2006/42/EC: • Dimensional Details: Certain information is shown on the truck Nameplate. For additional dimensional details on this or any other specific truck, consult your dealer. • Noise Levels: In accordance with standards EN 12053 and EN ISO 4871, the equivalent sound pressure level (Lpaz) at the operator position is in the range of 84.0 dB(A) . This may vary depending on truck options. • Human Vibration (Whole Body and Hand-Arm Vibration) . Note:The whole-body vibration level is measured according to standard EN 13059 which contains specific test criteria (load, speed, roadway surface, etc. ) . Worksite vibration levels may vary depending on actual operating and surface conditions. Whole-body vibration: —Measured whole-body vibration at the operator position, based upon standard production truck with full-suspension or comfort-suspension seat is listed below. —Declared whole-body vibration emission value is in accordance with EN 12096. • Full-suspension seat measured vibration emission value aw,z = 1.2 m/s2 • Uncertainty, K = 0.36 m/s2 —Values determined according to EN 13059 Hand-arm vibration: —Hand-arm vibration emission value = < 2.5 m/s2 • Hazardous Atmosphere: Before any truck within the European Community can be operated in a Potentially Explosive Atmosphere, it is necessary that the truck is suitably converted for the application. Conversions should only be carried out by a Hyster approved supplier. Confir

FAQs

What training does the manual require before an operator uses the lift truck?

The manual requires training in proper operation, understanding workplace hazards, understanding equipment capabilities and limitations, and learning the construction and maintenance needs. A qualified person must guide a new operator through driving and load handling steps before independent operation.

Who is responsible for ensuring safe operator operation?

The employer is responsible for ensuring the operator can see, hear, and has the physical and mental ability to operate the equipment safely.

What technical operating limits are stated for atmospheric conditions?

The manual specifies average continuous-duty temperature as +25°C, maximum short-term temperature up to +40°C, lowest indoor condition temperature +5°C, lowest outdoor condition temperature −20°C, altitude up to 2000 m, and relative humidity from 30% to 95% (non-condensing).

Oct 23, 2026

Upload by naya.afterrain