HIT-RE 500 V4 Injection Mortar - Technical Datasheet Update - Jan-23

Nov 1, 2026

Uploaded by hdkawk

HIT-RE 500 V4 injection mortar technical datasheet update (Jan-23) for cast-in anchor design and concrete fixing systems. Provides system components including foil pack mortar, anchor rods (HAS-U variants, HIS-N internal threaded sleeves), and safe borehole preparation using Hilti SafeSet technology. Covers suitability for cracked/non-cracked concrete C20/25 to C50/60, corrosion resistance, underwater applicability, 100-year working life, temperature curing down to -5°C, installation and loading conditions, approvals, certificates, and characteristic tension/shear resistance tables with embedment depth guidance.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages44

Reading Time1 h 51 min

AccessFree to download

System Overview

Components and Pack Contents

SafeSet Technology and Installation Conditions

Base Material and Load Conditions

Approvals and Design References

ETA and Certificates

Performance and Resistance Data

Working Life and Corrosion Resistance

Embedment Depth and Thickness Guidance

Characteristic Tension and Shear Resistance

HIT-RE 500 V4 INJECTION MORTAR Technical Datasheet Update: Jan-23 HIT-RE 500 V4 injection mortar Anchor design ( EN 1992-4) / Rods and Sleeves / Concrete Injection mortar system Benefits Foil pack: HIT-RE 500 V4 (available in 330, 500 and 1400 ml cartridges) Anchor rod: HAS-U (HDG, A4, HCR) HAS-U HAS-U A4 HAS-U HCRAM 8.8 (HDG) (M8-M39) Internally threaded sleeve: HIS-N HIS-RN (M8-M20) - SafeSet technology: Simplified method of borehole preparation using either Hilti hollow drill bit for hammer drilling or Roughening tool for diamond cored applications - Suitable for non-cracked and cracked concrete C 20/25 to C 50/60 - High loading capacity - Suitable for dry and water saturated concrete - Hilti Technical Data for underwater application - ETA Data for 100y working life - High corrosion resistance - Long working time at elevated temperatures - Cures down to-5 °C - Odourless epoxy Base material Installation conditions Concrete (non-cracked) Concrete (cracked) Hammer drilled holes Diamond drilled holes Hilti SafeSet technology Small edge distance and spacing Variable embedment depth Load conditions Other information Static/ quasi-static Seismic, ETA-C1, C2 Working life 100 years, ETA European Technical Assessment CE conformity Corrosion resistance High corrosion resistance 1) PROFIS Engineering design Software 1) High Corrosion Resistant (HCR) rods available only for HAS-U. Approvals / certificates | Description | Authority / Laboratory | No. / date of issue | | --- | --- | --- | | European Technical Assessmenta) | CSTB | ETA-20/0541 / 2021-09-04 | | Engineering Judgement (120-years working life based on EAD 330499- 01-0601) | BERGMEISTER, Vienna | No.: 10/2021 | | Shockproof fastenings in civil defence installations | Federal Office for Civil Protection, Bern | BZS D 21-602/ 2021-10-25 | a) All data given in this section according to ETA-20/0541 , issue 2021-09-04 (if not stated otherwise) . Static and quasi-static resistance (for a single anchor)– Working life 50 years All data in this section applies to: - Correct setting (see setting instruction) - No edge distance and spacing influence - Steel failure - HAS-U anchor rod with strength class 5.8 and 8.8 , AM anchor rod with strength class 8.8 , HIS-N internally threaded insert with screw 8.8 - Base material thickness and embedment depth , as specified in the table - Concrete C 20/25 - In-service temperature range I: -40 °C to +40 °C (min. base material temperature-40 °C, max. long/short term base material temperature: +24 °C/40 °C) - Short term loading. For long term loading apply 􀁜sus acc. to EN 1992-4 Hammer drilled holes , hammer drilled holes with hollow drill bit and diamond cored holes with Hilti roughening tool: 􀁜0sus = 0 ,88 ; diamond cored holes: 􀁜0sus = 0 ,89 Embedment deptha) and base material thickness | Anchor size | ETA-20/0541, issued 2021-09-04 | | | | | | | | Hilti [tech. data](tech. data) | | | | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | | | M8 | M10 | M12 | M16 | M20 | M24 | M27 | M30 | M33 | M36 | M39 | | HAS-U | | | | | | | | | | | | | Effective anchorage depth hef [mm] | 80 | 90 | 110 | 125 | 170 | 210 | 240 | 270 | 300 | 330 | 360 | | Base material thickness h [mm] | 110 | 120 | 140 | 161 | 214 | 266 | 300 | 340 | 374 | 410 | 444 | | HIS-N | | | | | | | | | | | | | Effective anchorage depth hef [mm] | 90 | 110 | 125 | 170 | 205 | - | - | - | - | - | - | | Base material thickness h [mm] | 120 | 150 | 170 | 230 | 270 | - | - | - | - | - | - | a) The allowed range of embedment depth is shown in the setting details. For hammer drilled holes, hammer drilled holes with hollow drill bit1) and diamond cored with Hilti roughening tool TE-YRT2) : Characteristic resistance | Anchor size | | | ETA-20/0541, issued 2021-09-04 | | | | | | | | Hilti [tech. data](tech. dat

FAQs

What is Hilti SafeSet technology and how does it affect borehole preparation?

SafeSet technology simplifies borehole preparation by using either a Hilti hollow drill bit for hammer drilling or a Roughening tool for diamond cored applications.

What concrete strength classes and conditions is HIT-RE 500 V4 suitable for?

It is suitable for non-cracked and cracked concrete C20/25 to C50/60, including both dry and water-saturated concrete.

What durability and temperature curing claims are listed for this injection mortar system?

The datasheet states high corrosion resistance with ETA data for 100 years working life, cures down to -5°C, and supports long working time at elevated temperatures.

Nov 1, 2026

Uploaded by hdkawk