Hilti HIT-RE 500-SD mortar - with HIT-V rod - Benefits and loading data

Nov 1, 2026

Uploaded by OmBimo

Hilti HIT-RE 500-SD injection mortar system with HIT-V rod for seismic and fire-relevant anchoring applications, highlighting SAFEset technology with hollow drill bit for one-step drilling and borehole cleaning. The sheet lists advantages such as suitability for cracked and non-cracked concrete, ETA seismic approval C1, high corrosion resistance, long working time at elevated temperatures, odourless epoxy, and defined embedment depth ranges by anchor size. It provides approved certificates and European Technical Approval references plus basic loading data, including mean ultimate, characteristic, design resistances and recommended loads for non-cracked and cracked concrete under ETA-07/0260.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages74

Reading Time3 h 6 min

AccessFree to download

Injection mortar system benefits

SAFEset technology and product features

Approvals and certificates

Basic loading data and resistance values

Embedment depth and base material thickness

Tensile and shear resistances (NRu, NRk, NRd)

Recommended loads

Hilti HIT-RE 500-SD mortar with HIT-V rod Hilti HIT-RE 500-SD mortar with HIT-V rod | Injection mortar system | | Benefits | | --- | --- | --- | | | | - SAFEset technology: drilling and | | Hilti HIT- | | borehole cleaning in one step | | RE 500-SD 330 | | with Hilti hollow drill bit | | ml foil pack | | - suitable for non-cracked and | | (also available as 500 ml | | cracked concrete C 20/25 to C 50/60 | | and 1400 ml | | - ETA seismic approval C1 | | foil pack) | | - high loading capacity
- suitable for dry and water saturated concrete | | | Static mixer | - large diameter applications
- high corrosion resistant | | | HIT-V rod | - long working time at elevated temperatures
- odourless epoxy
- embedment depth range:
from 40 … 160 mm for M8 to 120 … 600 mm for M30 | Tensile zone Seismic ETA-C1 High corrosion resistance European Technical Approval Small edge distance and spacing PROFIS Anchor design software Variable embedment depth Fire resistance Hilti SAFEset technology with hollow drill bit Approvals / certificates | Description | Authority / Laboratory | No. / date of issue | | --- | --- | --- | | European technical approval a) | DIBt, Berlin | ETA-07/0260 / 2013-06-26 | | ES report icl. seismic | ICC evaluation service | ESR 2322 / 2014-02-01 | | Shockproof fastenings in civil defence installations | Federal Office for Cicil Protection, Bern | BZS D 08-604 / 2009-10-21 | | Fire test report | MFPA, Leipzig | GS-III/B-07-070 / 2008-01-18 | | Assessment report (fire) | warringtonfire | WF 327804/B / 2013-07-10 | a) All data given in this section according ETA-07/0260, issue 2013-06-26. 496 These pages are part of the Anchor Fastening Technology Manual issue September 2014 09 / 2014 Hilti HIT-RE 500-SD mortar with HIT-V rod Basic loading data (for a single anchor) All data in this section applies to For details see Simplified design method - Correct setting (See setting instruction) - No edge distance and spacing influence - Steel failure - Base material thickness, as specified in the table - One typical embedment depth, as specified in the table - One anchor material, as specified in the tables - Concrete C 20/25, fck,cube = 25 N/mm² - Temperate range I (min. base material temperature -40°C, max . long term/short term base material temperature: +24°C/40°C) - Installation temperature range +5°C to +40°C Embedment depth a) and base material thickness for the basic loading data. Mean ultimate resistance, characteristic resistance, design resistance, recommended loads. | Anchor size | M8 | M10 | M12 | M16 | M20 | M24 | M27 | M30 | | --- | --- | --- | --- | --- | --- | --- | --- | --- | | Typical embedment depth [mm] | 80 | 90 | 110 | 125 | 170 | 210 | 240 | 270 | | Base material thickness [mm] | 110 | 120 | 140 | 165 | 220 | 270 | 300 | 340 | a) The allowed range of embedment depth is shown in the setting details . The corresponding load values can be calculated according to the simplified design method. Mean ultimate resistance: concrete C 20/25 – fck,cube = 25 N/mm², anchor HIT-V 5.8 | | Data according ETA-07/0260, issue 2013-06-26
| | | | | | | | | --- | --- | --- | --- | --- | --- | --- | --- | --- | | Anchor size | M8 | M10 | M12 | M16 | M20 | M24 | M27 | M30 | | Non cracked concrete | | | | | | | | | | Tensile NRu, m HIT-V 5.8 [kN] | 18,9 | 30,5 | 44,1 | 83,0 | 129,2 | 185,9 | 241,5 | 295,1 | | Shear V Ru, m HIT-V 5.8 [kN] | 9,5 | 15,8 | 22,1 | 41,0 | 64,1 | 92,4 | 120,8 | 147,0 | | Cracked concrete | | | | | | | | | | Tensile NRu, m HIT-V 5.8 [kN] | 18,9 | 30,5 | 44,1 | 65,2 | 110,8 | 146,1 | 196,0 | 226,2 | | Shear V Ru, m HIT-V 5.8 [kN] | 9,5 | 15,8 | 22,1 | 41,0 | 64,1 | 92,4 | 120,8 | 147,0 | Characteristic resistance: concrete C 20/25 – fck,cube = 25 N/mm², anchor HIT-V 5.8 | | Data according ETA-07/0260, issue 2013-06-26 | | | | | | | | | --- | --- | --- | --- | --- | --- | --

FAQs

What installation approach does SAFEset technology support?

It enables drilling and borehole cleaning in one step when used with the Hilti hollow drill bit, improving installation process efficiency.

Which approvals and reports are listed for this system?

The sheet references European technical approval ETA-07/0260 (2013-06-26) and includes related seismic, shockproof fastening, and fire test or assessment reports with issuing authorities and dates.

What load outputs does the sheet provide for different anchor sizes?

It provides basic loading data including mean ultimate, characteristic resistance, design resistance, and recommended loads for both non-cracked and cracked concrete, with values per anchor size (e.g., M8 to M30).

Nov 1, 2026

Uploaded by OmBimo