High Tensile Fixed-Knot Fence - Planning and Installation Guide - Using Wood Braces

Oct 25, 2026

Uploaded by Jake

High Tensile Fixed-Knot Fence: Planning and Installation Guide explains how to plan and install STAY-TUFF® fixed knot high tensile fencing using wooden braces. It covers the key fixed-knot design that resists vertical and horizontal slipping, the role of braces versus line posts, and a step-by-step process from preparing the fence line to installing braces and line posts, attaching wire, tensioning, splicing, and trimming. Safety guidance and an appendix of planning and knot-removal/tie instructions are included.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages48

Reading Time2 h 1 min

AccessFree to download

Planning

1. Plan & Map Your Fence on Paper

2. How Much Fence to Order

3. Completed Example Map

4. Completed Materials Checklist

Installation

1. Prepare the Fence Line Area

2. Set End Posts

3. Run the Guide Wire

4. Position Brace Posts and Line Posts

5. Set Brace Posts and Line Posts

6. Install the Brace Wire and Inline Strainer

7. Roll Out Fence and Attach to End Posts

8. Tension the Fence

9. Splice the Fence

High Tensile Fixed-Knot Fence Planning & Installation Guide Using Wood Braces Copyright 2022 STAY-TUFF Fence | All Rights Reserved High Tensile Fixed-Knot Fences How to Use this Planning and Installation Guide This guide will help you to understand and plan your STAY-TUFF® Fixed Knot High Tensile Fence, as well as provide you with step-by-step installation guidelines. The guide is divided into two distinct sections: Planning and Installation. There is also an Appendix with tools to help you plan and install your fence. The Fixed Knot resists slipping vertically or horizontally. Solid vertical Stay Wires resist bending or folding. An important and unique feature of the Stay-Tuff high tensile fence that you should keep in mind as you read the Guide is that it is supported and held under tension by braces at the beginning and end of each run. The Line Posts between the braces are intended only to hold the fence wire vertically in place. In this Guide, we will describe how to install the high tensile fence with wooden braces. Planning Section In this section, we will use an Example Map to walk you through the process of Planning. What you learn here will help you plan and map your own fence. Together, we will: • Create a sample map of a completed fence line • Determine the types and number of support elements that will be needed, including Braces and Line Posts • Create a Checklist of the Materials needed to install the fence based on the map Installation Section Using a straight run of fence taken from the Example Map, we will take you through the installation process: • Preparing the fence line • Installing Braces and Line Posts • Attaching, tensioning, splicing and trimming out the fence Fixed Knot Fence Anatomy Top Wire End Wrap Stay Wire (Vertical Wire) Line Wire (Horizontal Wire) Fixed Knot End Wrap Bottom Wire End Wrap Tension Crimp End Wrap Planning & Installation Guide Using Wood Braces For Your Safety • Always wear protective gloves, boots and clothing to prevent serious cuts and punctures when handling fence components and tools. • Protective eye wear is a must. Sharp edges and ends on fencing wire, staples and other components can cause serious eye injury. • Coiled fence rolls are packaged under tension. Be cautious and stay clear of the roll as releasing the strapping to prevent injuries when the tension is released. Be cautious—the release of tension can be sudden. • Always use a Spinning Jenny Smooth Wire Payout when unreeling high tensile smooth wire from coils. • Use the recommended tools suggested in the Installation Section of this manual. • Always read and follow the instruction manuals supplied by the manufacturers of the tools and equipment you use. • Inspect all tools and equipment before use tobe sure that they are functioning properly and are safe to use. • Any tools or equipment that appear to be damaged, worn, or not functioning correctly should be taken out of service immediately and should not be used. • Know and respect local building codes where applicable. • Work with a partner to make the job easier and safer. • Take your time and be cautious. Need More Information? Contact a STAY-TUFF Fence Specialist at: STAY-TUFF Fence 2700 Central Avenue Poplar Bluff, MO 63901 [Website:](Website: www.staytuff.com)[ www.staytuff.com](Website: www.staytuff.com) Toll Free: 1-800-867-6245 Email: [sales@staytuff.com](sales@staytuff.com) If you have any comments or ideas on how to improve this Guide, please let us know. Basic Fence Anatomy | |
Boss Post |
T-Post | | | --- | --- | --- | --- | | | | | | Straight Run Line Posts High Tensile Fixed-Knot Fences STEP-BY-STEP TABLE OF CONTENTS | PLANNING | | | | | --- | --- | --- | --- | | 1. PLAN & MAP YOUR FENCE ON PAPER
A) Have a Total Plan
B) Getting Started
C) Map Land-Use, Natural Features & Fence Line
D) Map Fence Support E

FAQs

What is the purpose of wooden braces in a fixed-knot high tensile fence run?

Wooden braces support and hold the fence under tension at the beginning and end of each run. Line posts primarily keep the fence wire positioned vertically between braces.

What main sections does the guide include?

The guide is divided into two sections: Planning and Installation, plus an Appendix with tools and additional instructions to help plan and install the fence.

What steps are involved in the installation process?

Installation includes preparing the fence line, setting end posts, running the guide wire, positioning and setting brace and line posts, installing brace wire and an inline strainer, rolling out fence and attaching to end posts, tensioning, splicing, and trimming.

Oct 25, 2026

Uploaded by Jake