H210-250XD48, H300-360XD Series Technical Guide - Specifications

Oct 29, 2026

Hyster H210-250XD48 and H300-360XD series technical specifications provide detailed dimensional, weight, and performance data for diesel seated lift trucks. The guide lists general parameters such as rated capacity and load center, wheel and tire configuration, mast tilt, lift heights, clearances, fork geometry, aisle and turning characteristics, and operator compartment dimensions. It also covers drivetrain and operator type, engine models (e.g., Cummins QSB), pneumatic tire details, and performance metrics including travel and lifting speeds plus drawbar pull and gradeability under specified conditions.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages12

Reading Time30 min

AccessFree to download

Dimensions

General Specifications

Wheels

Performance

H210-250XD48, H300-360XD SERIES TECHNICAL GUIDE WWW.HYSTER.COM DIMENSIONS 2 = Center of gravity of unladen truck H300XD / H330XD SPECIFICATIONS | GENERAL | 1-1 | Manufacturer
Model designation Powertrain / drivetrain Operator type | Q
c1
x
y
b10 b11 α/β h1 h2 h3 h4 h6 h6 h6 h6 h6 h6 h7 l1 l2 b2 s/e/l
b3 b5 b5 b8 m1 m2 Ast Wa

lbs in in in lbs lbs lbs
in in degin in in in in in in in in in in in in in in
in in in in in in in in
mph mph ft/min
ft/min lbs. lbs.
%%
mph mph ft/min
ft/min lbs. lbs.
%%

kg
mm
mm
mm kg kg kg
mm
mm deg
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
km/h km/hm/sm/skN kN
km/h km/hm/sm/skN kN

HYSTERH300XD Diesel Seated
30,000 24 35 130
39,328
64,122 20,498
29,085 9,298
13,608 610 889 3,300
17,839
5,206 18,830
2,362 8,541
Pneumatic
12.00-20 20PR
12.00-20 20PR
x4 / 2
72.5 1,842
78.7 2,000
15° / 12°
141 3,568 0 0
147 3,750 213 5,398 121.4 3,083 122.4 3,110 122.4 3,110 126.2 3,205 128.3 3,259 127.4 3,235 74.9 1,903 269 6,828 197 4,998 100 2,541
3.5 / 8 / 72 90 / 200 / 1,830
Standard pin type carriage
98.3 2.8 95.3 0 10 13 215 180
2,496 70
2,420 0
245341 5,473 4,584
17 27 On request
81 0.41 98 0.50
22,900 109 25,700 121 37 42
17 27 On request
71 0.36 98 0.50
20,800 99 23,600 111 33
38
Cummins QSB 6.7L Tier 4F

Cummins QSB 6.7L Tier 3 Engine

HYSTERH330XD Diesel Seated
33,000 24 35 130
41,103
68,444 20,459
31,046 9,280
14,969 610 889 3,300
18,644
5,658 20,644
2,567 9,364
Pneumatic
12.00-20 20PR
12.00-20 20PR
x4 / 2
72.5 1,842
78.7 2,000
15° / 12°
141 3,568 0 0
147 3,750 213 5,398 121.4 3,083 122.4 3,110 122.4 3,110 126.2 3,205 128.3 3,259 127.4 3,235 74.9 1,903 269 6,828 197 4,998 100 2,541
3.5 / 8 / 72 90 / 200 / 1,830
Standard pin type carriage
98.3 2.8 95.3 0 10 13 215 180
Engine
17 27 On request
81 0.41 98 0.50
22,800 108 25,600 121
3539
17 27 On request
71 0.36 98 0.50
20,700 99 23,400 111
3150
2,496 70
2,420 0 245 341
5,473 4,584
18 29 On request
91 0.46 94 0.48
24,000 111 26,800 123 35
35
18 29 On request
79 0.40 94 0.48
21,900 101 24,600 114 35
35 | | --- | --- | --- | --- | | | 1-2 | | | | | 1-3 | | | | | 1-4 | | | | | 1-5 | Rated capacity / rated load Load center distance
Load distance Wheelbase
Total truck weight without load Axle loading with load, front / rear
Axle loading without load, front / rear Tire type
Tire size, front
Tire size, rear
Wheels, number front / rear (x = driven wheels) Tread, front
Tread, rear
Mast tilt, forward / backward Height, mast lowered Free lift (top of forks)
Lift (top of forks) Height, mast extended
Height to top of operator compartment (open cab) Height, top of operator comp (closed cab)
Height, top of operator comp (closed cab w/ airco)
Height, top of operator comp (closed cab w/ strobe light)
Height, top of operator comp (closed cab w/ work lights)
Height, top of operator comp (closed cab w/ airco & strobe) Seat height to seat point index
Overall length Length to face of forks Overall width
Fork dimensions ISO 2331
Fork carriage type Fork carriage width
Distance between fork-arms, minimum (in-in)
Distance between fork-arms, maximum (out-out) Sideshift
Ground clearance, with load, below mast Ground clearance, center of wheelbase
Min. aisle width (add load length and clearance) Outside turning radius
PERFORMANCE
Travel speed, with / without load (1)
Travel speed, with load locked / without load Lifting speed, with / without load 126cc pump Lowering speed with / without load
Drawbar pull-1 mph | 1.6 km/h, with / withou

FAQs

What types of specifications are included in the H210-250XD48 and H300-360XD technical guide?

The guide covers dimensions, general specifications (capacity, loads, weights, tires, mast and fork geometry), wheels, and performance metrics such as travel speed, lifting speed, drawbar pull, and gradeability.

Which engine models are referenced for these lift trucks?

The document references Cummins QSB 6.7L with Tier 4F and Tier 3 variants in the specifications section.

What performance measurements are listed in the guide?

Performance data includes travel speed with and without load, lifting speed with and without load (with pump references), lowering speed, drawbar pull (with and at stall), and gradeability (at 1 mph and at stall), with load conditions stated.

Oct 29, 2026

Upload by Malam Tenang