GON-2O Prep Cleaner - Water Based Prepaint Prep and Surface Cleaner

Sep 27, 2026

Uploaded by Ivy

Water based GON-2O prepaint prep and surface cleaner (NOW BLUE COLOR) removes grease, oil, wax, silicones, and polish contaminants before painting or priming. It improves primer and paint adhesion, is easy to use, and provides flash rust protection. Suitable for steel, iron, aluminum, galvanized steel, non-ferrous metals, old paint, and plastics, it is water-based for low odor and nonflammable use. Includes application steps, dilution guidance, technical data (VOC, pH, color), safety and first-aid instructions, and limited warranty terms.

LanguageEnglish

CategoryHealthcare

FormatPDF

Pages2

Reading Time5 min

AccessFree to download

Applications

Prepaint Cleaner

Prepaint Surface Prep

Cleans Away

Grease, Oil, Wax, Silicones Polish

Use Before Painting On

Surfaces and Materials

Features and Benefits

How to Apply

Product Preparation

Surface Cleaning

Application Steps

Physical/Chemical Data

Caution and First Aid

GON-2 O Prep Cleaner Water Based (NOW BLUE COLOR) Prepaint Prep and Surface Cleaner Applications: Prepaint Cleaner Prepaint Surface Prep Cleans Away: Grease Oil Wax Silicones Polish Use Before Painting On: Steel Iron Aluminum Galvanized Steel Non-Ferrous Metals Old Paint Plastics Features and Benefits: Water Based Easy to use Improves Adhesion of the Primer/ Paint Contains Flash Rust Protection 1. Wipe on GON-2O 2. Wipe off Contamination 3. Rinse off excess Product description: XIM’s GON-20 Water Based PrePaint Prep Cleaner is formulated to remove grease, oil, wax, polish, silicones and other contaminants before painting or priming. It can be used as an alternative to strong solvent based pre paint cleaners. Being water based, it is low in odor and non flammable, therefore safe use. GON-20 is in compliance with Federal and State VOC regulations. Packaging Data: XIM GON-20 Water Based Prepaint Prep Cleaner | Quarts | - 12 per carton | | --- | --- | | Gallons | - 6 per carton | Technical Service Information: For further information about this or any other XIM product, contact our us toll free at (800) 262-8469. Limited Warranty: This product is made to the highest standards in order to provide you with consistently optimum results. If this product fails to perform as specified herein, XIM will furnish an equivalent amount of replacement XIM product, or will refund the purchase price upon proof of purchase. XIM will not be liable for any indirect or consequential damages. There are thus no warranties of fitness or merchantability beyond that provided above. This warranty does not include labor or cost of labor for application or removal of any paint or primer. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. XIM . . When Ordinary primers Are Not Enough! XIM Water Based, GON-2O Prepaint Prep and Cleaner Product Preparation: XIM’s GON-2O is ready to apply from the container. No thinning is required. If thinning is desired, however, it can be diluted with water. Shake before using Note: Keep the containers tightly closed when not in use. Store at room temperature. Surface Cleaning: Careful surface preparation and cleaning is the key to a good result. To be sure that the surface is thoroughly clean and free from all grease, wax, oil, polish, loose paint and dirt or rust, wipe down the surface with GON-2O Prep Cleaner. Do not use mineral spirits, turpentine solvents or cleaners that will leave oily residues. How to Apply: XIM’s GON-2O is easy to apply and use. Apply from the can to a clean cloth or wiper and wipe onto the surface to be cleaned. Turn the wiper over or use another cloth to “wipe off” the GON-2O and the contamination. The GON-2O can also be “squirted” onto the surface using a squirt bottle. Follow with a wiping of the surface to loosen the contamination, then “wipe off” the GON-2O and the contamination. The GON-2O uses strong alkaline detergents and additives for cleaning the toughest soils and contamination. After the dirt, grease oil or other contamination has been wiped off, wipe the surface thoroughly with a clean damp wiper to remove any excess detergent or contamination from the micro pours in the surface. Where contamination is heavy, several cleanings may be required. Note: GON-2O will generally not harm the surface or old paint being cleaned, however, always test a small area before using. Physical/Chemical Data: XIM GON-2O Clear Coat | Weight per Gallon : | 8.6 lb/gallon | | --- | --- | | Color | Blue, Semi-transparent | | Application Conditions : | 40 deg. F. To 100 deg. F | | Flash Point : | not applicable | | VOC : | Less than 10% | | pH of GON-2O : | 12-13 | Caution: Use only with adequate ventilation. Do not take internally. Avoid contact with eyes and skin. Wear alkaline resistant, sturdy gloves. Wear safety glasses with side shields or safety goggles. Close containers after

FAQs

What does GON-2O clean off before painting?

GON-2O cleans away grease, oil, wax, silicones/polish, and other surface contaminants that can interfere with primer and paint adhesion.

Which surfaces can GON-2O be used on before painting?

It is intended for steel, iron, aluminum, galvanized steel, non-ferrous metals, old paint, and plastics.

How do you apply GON-2O during surface prep?

Wipe GON-2O onto a clean cloth or wiper, wipe off contamination, and then rinse off excess; heavy contamination may require several cleanings, followed by wiping with a clean damp wiper to remove excess detergent.

Sep 27, 2026

Uploaded by Ivy