Golden Triangle Regional Airport - Movement Area Drivers Training Exam - Must get 80% to pass

Sep 18, 2026

Uploaded by Oliver

Golden Triangle Regional Airport movement area drivers training exam assesses knowledge of runway and taxiway signage, markings, and operational rules. It covers hold positions and hold lines, airport control concepts, FOD sources, safe ways to cross runways, and pilot/controller light signals. The exam also tests required vehicle equipment, radio failure procedures, standard phraseology, taxiway light colors, clearance requirements, and safety area dimensions for runway 36-18, plus likely consequences of non-compliance.

LanguageEnglish

CategoryExam

FormatPDF

Pages6

Reading Time15 min

AccessFree to download

Golden Triangle Regional Airport - Movement Area Drivers Training Exam

Multiple-choice questions (1-27)

Golden Triangle Regional Airport Movement Area Drivers Training Exam (Must get 80% to pass) Name (Print Full) : Date: Company or Organization: 1. The runway hold position sign (red and white) means? a. that you are about to go onto the protected area next to the runway. b. that you should follow the signs to get to the parking apron. c. nothing to you, it is only there for pilot’s use. 2. Two solid yellow stripes followed by two broken yellow stripes is the marking for a runway hold line. A hold line means: a. all aircraft must stop and be cleared before going onto the runway. b. everyone, including vehicles, must stop unless authorized to proceed onto to the runway. c. that you are about to go next to some electronic signal equipment. 3. Runway markings are: a. white b. yellow [c](c. red)[. red](c. red) 4. Taxiway markings are: a. white b. yellow [c](c. red)[. red](c. red) 5. A “controlled” airport is one that has an Air Traffic Control Tower. a. true b. false 6. FOD is created by: a. bad weather b. airport manager c. trash and debris 7. If you need to cross a runway, you should try to do so: [a.](a. at)[ at](a. at) the end b. in the middle c. wherever you want 8. If the air traffic controller signals you with a flashing red light, you should: a. stop b. move off the runway or taxiway c. ignore the signal as it is for aircraft only 9. The consequences of non-compliance apply to: a. airport employees b. tenants [c.](c. contractors)[ contractors](c. contractors) d. all of the above 10. Ground vehicles that operate in the movement and safety areas are required to have: a. two-way radios b. flashing yellow lights c. escort / no radio d. all of the above 11. The ground frequency at Golden Triangle Regional Airport is: a. 118.92 b. 121.90 c. 135.37 d. 126.37 12. Your vehicle is required to have a flashing light when operating on the airport movement areas. a. true b. false 13. If your radio quits while you are on the runway, you should: a. leave the runway area immediately b. turn your vehicle towards the tower and flash your lights c. assume responsibility for scanning for traffic until your work is completed. d. stop vehicle and walk to the nearest radio or telephone to contact tower. 14. If you did not understand the controller, the correct phraseology to use is: a.“Repeat what you said” b.“Request read back” c.“Say again” 15. While monitoring CTAF at night, you hear a pilot report he is on base for the runway. He is at position: a. a d. d b. b e. e c. c f. none of the above 16. Taxiway lights are what color? [a.](a. red)[ red](a. red) [b.](b. blue)[ blue](b. blue) [c.](c. red)[ red](c. red) d. yellow 17. At a controlled airport, before crossing a runway, you must: a. go to one end to cross b. scan for traffic, then go c. get controller’s permission d. monitor tower frequency 18. Golden Triangle is a: a. uncontrolled airport b. controlled airport c. military controlled airport d. a and b, depending on the time of day e. a, b, and c 19. Possible consequences of non-compliance include: a. recurrent training b. revoking airport driving privileges c. suspension from work d. all of the above 20. The safety area(s) for runway 36-18 extends: a. 500’ ends 300’ wide b. 1000’ ends, 500’ wide c. 150’ ends, 200’ wide d. none of the above 21. During ATC tower operating hours, you may cross or enter a taxiway without clearance from air traffic control. a. true b. false 22. What does this marking/sign indicate? a. This sign indicates thousands of feet remaining to the end of the runway. b. This sign identifies the runway on which your aircraft is currently located. c. This sign indicates the direction to a destination runway. 23. Do you know this marking? a. This painted marking indicates the line between a movement area and a nonmovement are

FAQs

What does a runway hold position sign (red and white) indicate?

It means you are about to go onto the protected area next to the runway.

What is the correct meaning of two solid yellow stripes followed by two broken yellow stripes?

It is a runway hold line; aircraft must stop and be cleared before going onto the runway, and everyone including vehicles must stop unless authorized to proceed.

What should you do if you need to cross a runway?

You should try to cross at the end of the runway, not in the middle or wherever you want.

Sep 18, 2026

Uploaded by Oliver