Genie S-100 & Genie S-105 & Genie S-120 & Genie S-125 - Operator’s Manual - Safety Rules

Nov 4, 2026

Uploaded by Marglet

Operator’s manual with maintenance information for Genie S-100, S-105, S-120, and S-125. Establishes mandatory safety rules covering safe operation before use, including pre-operation inspection, function tests, workplace inspection, and correct intended use. Provides critical hazard guidance for electrocution, specifying minimum safe approach distances by voltage range and instructing actions if contact occurs. Includes tip-over hazard controls using platform capacity limits, tilt alarm behavior, and restrictions on movement, wind exposure, terrain driving, and disabling safety devices.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages41

Reading Time1 h 43 min

AccessFree to download

Safety Rules

Electrocution Hazards

Tip-over Hazards

Contents Overview

Controls

Pre-operation Inspection

Maintenance

Function Tests

Work Place Inspection

Operating Instructions

Transport and Lifting Instructions

Decals

Specifications

| | | | | --- | --- | --- | | | Operator’s Manual
with Maintenance Information | Second Edition
Second Printing
Part No . 82599 | | |
| | | Important
Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall be permitted to operate this machine. This manual should be considered a permanent part of your machine and should remain with the machine at all times. If you have any questions, call Genie Industries. | | --- | | Contents
Page
Safety Rules .............................................................. 1
Controls ..................................................................... 7
Pre-operation Inspection ........................................... 10
Maintenance ............................................................. 12
Function Tests .......................................................... 15
Work Place Inspection .............................................. 21
Operating Instructions ............................................... 22
Transport and Lifting Instructions . ............................. 27
Decals ...................................................................... 30
Specifications ........................................................... 34 | Contact us: Internet: [http://www.genielift.com](http://www.genielift.com) [E-mail: techpub@genieind.com](E-mail: techpub@genieind.com) Copyright © 2000 by Genie Industries First Edition: January 2001 Second Edition: Second Printing, August 2004 "Genie" is a registered trademark of Genie Industries in the U.S.A. and many other countries. "S" is a trademark of Genie Industries. These machines comply with ANSI/SIA 92.5-1992. Printed on recycled paper Printed in U.S.A. Genie S-100 & Genie S-105 & Genie S-120 & Genie S-125 Part No.82599 Safety Rules Danger Failure to obey the instructions and safety rules in this manual will result in death or serious injury. Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual. 1 Avoid hazardous situations. Know and understand the above principle before going on to the next section. 2 Always perform a pre-operation inspection. 3 Always perform function tests prior to use. 4 Inspect the workplace. 5 Only use the machine as it was intended. You read, understand and obey the manufacturer's instructions and safety rules—safety and operator's manualsand machine decals. You read, understand and obey employer's safety rules and worksite regulations. You read, understand and obey all applicable governmental regulations. You are properly trained to safely operate the machine. Part No.82599 Genie S-100 & Genie S-105 & Genie S-120 & Genie S-125 1 SAFETY RULES Electrocution Hazards This machine is not electrically insulated and will not provide protection from contact with or proximity to electrical current. Maintain safe distances from electrical power lines and apparatus in accordance with applicable governmental regulations and the following chart. | Voltage
Phase to Phase | Minimum Safe Approach Distance | | | --- | --- | --- | | | Feet | Meters | | 0 to 300V | Avoid | Contact | | 300V to 50KV | 10 | 3.05 | | 50KV to 200KV | 15 | 4.60 | | 200KV to 350KV | 20 | 6.10 | | 350KV to 500KV | 25 | 7.62 | | 500KV to 750KV | 35 | 10.67 | | 750KV to 1000KV | 45 | 13.72 | Allow for platform movement, electrical line sway or sag and beware of strong or gusty winds. Keep away from the machine if it contacts energized power lines. Personnel on the ground orin the platform must not touch or operate the machine until energized power lines are shut off. Do not use the machine as a ground for welding unless the machine is equipped with the weld line to platform option and it is properly connected. Tip-over Hazards Occupants, equipment and materials shall

FAQs

Who is allowed to operate the machine according to the manual?

Only trained and authorized personnel may operate the machine. The manual requires operators to read, understand, and obey all safety rules and operating instructions.

What does the manual require before operating the machine?

Perform a pre-operation inspection and run function tests prior to use. Also inspect the workplace and follow the manufacturer’s instructions, safety rules, and applicable regulations.

How should operators respond if the tilt alarm sounds?

Do not extend, rotate, or raise the boom above horizontal. Move the machine to a firm, level surface before raising the platform; if the alarm sounds while the platform is raised, retract the boom and lower the platform with extreme caution.

Nov 4, 2026

Uploaded by Marglet