Genie GS-2032 & GS-2632 & GS-2046 & GS-2646 & GS-3246 - Operator’s Manual - First Edition - Seventeenth Printing

Nov 4, 2026

Operator’s Manual with Maintenance Information for Genie GS-2032, GS-2632, GS-2046, GS-2646, and GS-3246. Provides safety rules and operating instructions, including danger warnings, electrocution hazards, required minimum approach distances by voltage range, and guidance to avoid storms or misuse as a welding ground. Includes tip-over hazard limits, platform capacity and occupant restrictions, pre-operation inspection requirements, and instructions for function tests, workplace inspection, maintenance, and inspections across the manual’s sections.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages39

Reading Time1 h 38 min

AccessFree to download

Safety

Electrocution Hazards

Tip-over Hazards

Contents Overview

Safety

Legend

Controls

Pre-operation Inspection

Maintenance

Function Tests

Workplace Inspection

Operating Instructions

Transport Instructions

Decals

Specifications

Operator’s Manual with Maintenance Information First Edition Seventeenth Printing Part No . 46281 | Important
Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall be permitted to operate this machine. This manual should be considered a permanent part of your machine and should remain with the machine at all times. If you have any questions, call Genie Industries. | | --- | | Contents
Page
Safety ........................................................................ 1
Legend ....................................................................... 9
Controls .................................................................... 10
Pre-operation Inspection ........................................... 12
Maintenance ............................................................. 14
Function Tests .......................................................... 16
Workplace Inspection ................................................ 21
Operating Instructions ............................................... 22
Transport Instructions ............................................... 27
Decals ...................................................................... 28
Specifications ........................................................... 32 | Contact us: Internet: [http://www.genielift.com](http://www.genielift.com) [e-mail: techpub@genieind.com](e-mail: techpub@genieind.com) Copyright © 1997 by Genie Industries First Edition: Seventeenth Printing, October 2002 "Genie" is a registered trademark of Genie Industries in the U.S.A. and many other countries. "GS" is a trademark of Genie Industries. These machines comply with ANSI/SIA 92 .6-1999. Printed on recycled paper Printed in U.S.A. Genie GS-2032 & GS-2632 & GS-2046 & GS-2646 & GS-3246 Part No.46281 Safety Rules Danger Failure to obey the instructions and safety rules in this manual will result in death or serious injury. Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual. 1 Avoid hazardous situations. Know and understand the safety rules before going on to the next section. 2 Always perform a pre-operation inspection. 3 Always perform function tests prior to use. 4 Inspect the workplace. 5 Only use the machine as it was intended. You read, understand and obey: Manufacturer's instructions and safety rules—safety and operator's manualsand machine decals employer's safety rules and worksite regulations applicable governmental regulations You are properly trained to safely operate the machine. Part No.46281 Genie GS-2032 & GS-2632 & GS-2046 & GS-2646 & GS-3246 1 SAFETY RULES Electrocution Hazards This machine is not electrically insulated and will not provide protection from contact with or proximity to electrical current. Maintain safe distances from electrical power lines and apparatus in accordance with applicable governmental regulations and the following chart. | Voltage
Phase to Phase | Minimum Safe Approach Distance
Feet Meters | | | --- | --- | --- | | 0 to 300V | Avoid Contact | | | 300V to 50KV | 10 | 3.05 | | 50KV to 200KV | 15 | 4.60 | | 200KV to 350KV | 20 | 6.10 | | 350KV to 500KV | 25 | 7.62 | | 500KV to 750KV | 35 | 10.67 | | 750KV to 1000KV | 45 | 13.72 | Allow for platform movement, electrical line sway or sag and beware of strong or gusty winds. Keep away from the machine if it contacts energized power lines. Personnel on the ground or in the platform must not touch or operate the machine until energized power lines are shut off. Do not operate the machine during lightning or storms. Do not use the machine as a ground for welding. Tip-over Hazards Occupants and equipment must not exceed the maximum platform capacity or the maximum capacity of the platform extension. | Maximum capacity-GS

FAQs

What are the main tip-over and capacity restrictions?

Occupants and equipment must not exceed the maximum platform capacity or platform extension capacity. The manual lists maximum capacities and maximum occupants for each model and usage type (outdoor vs indoor, CE/Australia vs ANSI/CSA).

Nov 4, 2026

Uploaded by percent12345