Frymaster Dean Super Runner Series Electric Fryers - Chapter 1 - Installation Instructions - Safety Information and General Installation Instructions

Oct 29, 2026

Upload by Aria

Installation & Operation Manual content for Frymaster Dean Super Runner Series electric fryers, focused on Chapter 1 installation instructions. Provides safety information for operators and qualified personnel, emphasizing professional installation, proper wiring and disconnection requirements, and using certified technicians. Includes multiple NOTICE and DANGER warnings on warranty restrictions for unauthorized parts, hardwiring and restraint device requirements, compliance with national and local codes, and hazard prevention such as correct stabilization, non-step front ledge, and fire-flammables avoidance.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages12

Reading Time30 min

AccessFree to download

Chapter 1: Installation Instructions

1.1 Safety Information

1.2 General Installation Instructions

|
Super Runner Series Electric SR114E | |
S Runner Seriesuper Electric Fryers
Installation & Operation Manual | | | --- | --- | --- | --- | | | | | NON-CE &
| | | Dean, a member of the Commercial Food Equipment Service Association, recommends using CFESA Certified Technicians. | | | | | 24-Hour Service Hotline 1-800-551-8633 | *8196010* 10/2015 | | Please read all sections of this manual and retain for future reference. | | NOTICE
IF, DURING THE WARRANTY PERIOD, THE CUSTOMER USES A PART FOR THIS MANITOWOC FOOD SERVICE EQUIPMENT OTHER THAN AN UNMODIFIED NEW OR RECYCLED PART PURCHASED DIRECTLY FROM FRYMASTER DEAN, OR ANY OF ITS AUTHORIZED SERVICERS, AND/OR THE PART BEING USED IS MODIFIED FROM ITS ORIGINAL CONFIGURATION, THIS WARRANTY WILL BE VOID. FURTHER, FRYMASTER DEAN AND ITS AFFILIATES WILL NOT BE LIABLE FOR ANY CLAIMS, DAMAGES OR EXPENSES INCURRED BY THE CUSTOMER WHICH ARISE DIRECTLY OR INDIRECTLY, IN WHOLE OR IN PART, DUE TO THE INSTALLATION OF ANY MODIFIED PART AND/OR PART RECEIVED FROM AN UNAUTHORIZED SERVICER. | | | --- | --- | --- | NOTICE This appliance is intended for professional use only and is to be operated by qualified personnel only. A Frymaster Dean Factory Authorized Servicer (FAS) or other qualified professional should perform installation, maintenance, and repairs. Installation, maintenance, or repairs by unqualified personnel may void the manufacturer’s warranty. See Chapter 1 of this manual for definitions of qualified personnel. NOTICE All fryers shipped without factory supplied cords and plug assemblies must be hardwired using flexible conduit to the terminal block located on the rear of the fryer. These fryers should be wired to NEC specifications. Hardwired units must include installation of restraint devices. NOTICE This equipment must be installed in accordance with the appropriate national and local codes of the country and/or region in which the appliance is installed. NOTICE Drawings and photos used in this manual are intended to illustrate operational, cleaning and technical procedures and may not conform to onsite management operational procedures. DANGER Improper installation, adjustment, maintenance or service, and unauthorized alterations or modifications can cause property damage, injury, or death. Read the installation, operating and service instructions thoroughly before installing or servicing this equipment DANGER The front ledge of the fryer is not a step. Do not stand on the fryer. Serious injury can result from slips or contact with the hot oil. DANGER Single fryers equipped with legs must be stabilized by installing anchor straps. All fryers equipped with casters must be stabilized by installing restraining chains DANGER Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or anyother appliance. | | WARNING
No structural material on the fryer should be altered or removed to accommodate placement of the fryer under a hood. Questions? Call the Frymaster Dean Service Hotline at 1-800-551-8633. | | | --- | --- | --- | DANGER Adequate means must be provided to limit the movement of this appliance without depending on or transmitting stress to the electrical conduit. A restraint kit is provided with the fryer. If the restraint kit is missing contact your local Frymaster Factory Authorized Servicer (FAS) for part number 826-0900. SUPER RUNNER SERIES ELECTRIC FRYERS CHAPTER 1: INSTALLATION INSTRUCTIONS 1.1 Safety Information Before attempting to operate your unit, read the instructions in this manual thoroughly. Throughout this manual you will find notations enclosed in double-bordered boxes with the symbol . The information contained in the box concerns actions or conditions that may cause or result in injury to personnel or damage to your system, and/or cause your system to malfunction. 1.2 General Installation Instructions | | NOTICE
This appliance is only fo

FAQs

Who is allowed to install, maintain, and repair the Frymaster Dean electric fryers?

Installation, maintenance, and repairs should be performed by a Frymaster Dean Factory Authorized Servicer (FAS) or other qualified professional. Unqualified personnel may void the manufacturer’s warranty.

What wiring and disconnection requirements apply during installation?

If wired directly to the electrical power supply, include a disconnection means with a contact separation of at least 3-mm in all poles. Ensure cord accessibility unless other disconnection means (e.g., a circuit breaker) is provided, and follow NEC specifications where applicable.

How must fryers be stabilized to prevent hazards?

Single fryers with legs must be stabilized using anchor straps, and units with casters must be stabilized using restraining chains. Adequate means must limit appliance movement without stressing the electrical conduit, using the provided restraint kit or contacting a servicer if missing.

Oct 29, 2026

Upload by Aria