EXT3-C-WP-XR-T 4K60 USB-C Wall Plate Transmitter - User Manual

Oct 28, 2026

Upload by Logic

EXT3-C-WP-XR-T 4K60 USB-C Wall Plate Transmitter user manual provides installation and operation guidance for Kramer’s HDBaseT 3.0 extended-reach transmitter. It covers unpacking and preparation, best practices for cabling and placement, safety and recycling instructions, and an overview of key capabilities such as 4K60 (4:4:4) HDMI, USB, Ethernet, RS-232, and IR transmission over twisted pair. It also explains intended performance, power via PoE over copper, and signal extension up to 100 m with compatible HDBaseT receivers.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages24

Reading Time1 h 0 min

AccessFree to download

Introduction

Getting Started

Overview

Typical Applications

Defining EXT3-C-WP-XR-T Front and Rear Panels

Mounting EXT3-C-WP-XR-T

Connecting EXT3-C-WP-XR-T

Defining the DIP-switches

Connecting to EXT3-C-WP-XR-T via RS-232

Wiring RJ-45 Connectors

Principles of Operation

Controlling Display Power On/Off

Connecting EXT3-C-WP-XR-T to Other HDBaseT-Compatible Devices

Technical Specifications

USER MANUAL MODEL: EXT3-C-WP-XR-T 4K60 USB-C Wall Plate Transmitter Contents Introduction 1 Getting Started 1 Overview 2 Typical Applications 4 Defining EXT3-C-WP-XR-T 4K60 USB-C Wall Plate Transmitter 5 Defining the EXT3-C-WP-XR-T Front and Rear Panels 5 Defining the EXT3-C-WP-XR-T Front and Rear Panels EU/UK 7 Mounting EXT3-C-WP-XR-T 9 Mounting EXT3-C-WP-XR-T in a Wall Box 10 Mounting EXT3-C-WP-XR-T (EU/UK) in a Wall Box 11 Connecting EXT3-C-WP-XR-T 12 Connecting EXT3-C-WP-XR-T (EU/UK) 14 Defining the DIP-switches 15 Connecting to EXT3-C-WP-XR-T via RS-232 17 Wiring RJ-45 Connectors 17 Principles of Operation 18 Controlling Display Power On/Off 18 Connecting EXT3-C-WP-XR-T to Other HDBaseT-Compatible Devices 18 Technical Specifications 19 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded most of our line, making the best even better! Getting Started We recommend that you: • Unpack the equipment carefully and save the original box and packaging materials for possible future shipment. • Review the contents of this user manual. [Go to](Go to www.kramerav.com/downloads/EXT3-C-WP-XR-T to check for)[ ](Go to www.kramerav.com/downloads/EXT3-C-WP-XR-T to check for)[www.kramerav.com/downloads/EXT3-C-WP-XR-T](Go to www.kramerav.com/downloads/EXT3-C-WP-XR-T to check for)[ to check for](Go to www.kramerav.com/downloads/EXT3-C-WP-XR-T to check for) up-to-date user manuals, application programs, and to check if firmware upgrades are available (where appropriate) . Achieving Best Performance • Use only good quality connection cables (we recommend Kramer high-performance, high-resolution cables) to avoid interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables) . • Do not secure the cables in tight bundles or roll the slack into tight coils. • Avoid interference from neighboring electrical appliances that may adversely influence signal quality. • Position your Kramer EXT3-C-WP-XR-T away from moisture, excessive sunlight and dust. Safety Instructions Caution: • This equipment is to be used only inside a building. It may only be connected to other equipment that is installed inside a building. • For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the terminal or in the User Manual. • There are no operator serviceable parts inside the unit. Warning: • Use only the power cord that is supplied with the unit. • Disconnect the power and unplug the unit from the wall before installing. • Do not open the unit. High voltages can cause electrical shock! Servicing by qualified personnel only. • To ensure continuous risk protection, replace fuses only according to the rating specified on the product label which is located on the bottom of the unit. Recycling Kramer Products The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled. To comply with the WEEE Directive, Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling [pages at](pages at www.kramerav.com/il/quality/environment)[ ](pages at www.kramerav.com/il/quality/environment)[www.kramerav.com/il/quality/environment](pages at www.kramerav.com/il/quality/environment). Overview

FAQs

What signals does the EXT3-C-WP-XR-T transmitter support and transmit?

It transmits uncompressed 4K60Hz (4:4:4) HDMI plus USB, Ethernet, RS-232, and IR signals over twisted pair to an HDBaseT-compatible receiver.

How far can the EXT3-C-WP-XR-T extend video signals?

It can extend uncompressed video signals up to 100 m (330 ft) over CAT copper cables at 4K@60Hz (4:4:4), depending on system and cabling quality.

How is power provided to the EXT3-C-WP-XR-T?

It accepts power over the copper extension cable from a remote PoE provider device.

Oct 28, 2026

Upload by Logic