ES-200X - Intelligent Addressable FACP with Communicator - Fire Alarm Control Panels

Nov 2, 2026

Uploaded by Noah

ES-200X is an intelligent addressable Fire Alarm Control Panel (FACP) by Fire•Lite Alarms, designed as a direct replacement for MS-9200UDLS. It includes a pre-installed dual-technology IPOTS-COM communicator (POTS and IP) for central station reporting and supports up to 198 addressable devices, including detectors and modules. The panel enables remote/local upload and download via USB or Ethernet, provides extensive built-in features such as programmable NAC circuits, alarms verification, walk-test logging, history capacity, and robust SLC communication loop support.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages4

Reading Time10 min

AccessFree to download

Features

SLC Communication Loop

Notification Appliance Circuits (NACs)

Programming and Software

User Interface (LED Indicators, Keypad)

ES-200X Intelligent Addressable FACP with Communicator Addressable Fire Alarm Control Panels General The ES-200X is the latest intelligent addressable Fire Alarm Control Panel (FACP) from Fire•Lite Alarms and is a direct replacement for the MS-9200UDLS. The ES-200X comes with a pre-installed communicator and supports up to 198 addressable devices (99 detectors and 99 modules) . With an extensive list of powerful features, the ES-200X programs just like Fire•Lite’s other addressable products, yet fits into applications previously served only by conventional panels. The pre-installed IPOTS-COM is a dual technology (POTS and IP) communicator. The POTS transmits system status (alarms, troubles, AC loss, etc. ) to a Central Station via the public switched telephone network. The IP communicator’s internet monitoring capability sends alarm signals over the Internet saving the monthly cost of two dedicated business telephone lines. Although not required, the secondary telephone line may be retained providing backup communication over the public switched telephone line. Optional cellular reporting is available using the CELL-MOD or CELL-CAB-FL. Remote and local programming of the control panel is possible using the FS-Tools Upload/Download utility. Programming databases can be uploaded/downloaded via the panel’s USB port (and USB cable) or via an ethernet connection using the IPOTS-COM communicator. The USB port also allows for the download or upload of the entire program, history file, walk-test data, current status and system voltages by means of a USB flash drive. The power supply and all electronics are contained on a circuit board supported on a new quick install chassis and housed in a metal cabinet. Available accessories include local and remote upload/download software, remote annunciators, and reverse polarity/city box transmitter (4XTMF) . Features • Listed to UL Standard 864, 10th edition • Pre-installed IPOTS-COM Ethernet IP and POTS (Plain Old Telephone Service) Central Station Communicator over AlarmNet • Optional CELL-MOD or CELL-CAB-FL GSM Central Station Communicator over AlarmNet® • Automated activation of the ECC-50/100 Emergency Command Center • ECC-FFT Firefighter Telephone option • Compatible with SWIFT® wireless devices • Auto-programming (learn mode) reduces installation time. Reports two devices set to the same address • Four built-in, independently programmable Style Z (Class A) or Style Y (Class B) NAC circuits • Selectable strobe synchronization for System Sensor, Wheelock, and Gentex devices • Notification Appliance Circuit End of Line resistor matching • Four programmable function keys for ease of maintenance • Two programmable relays and one fixed trouble relay • Built-in Programmer • Integral 80-character LCD display with backlighting • Real-time clock/calendar with automatic daylight savings control • History file with 1,000 event capacity • Addressable sounder base compatibility • Multi-criteria detector (smoke, heat, CO) with programmable response • Control module delay timer • Automatic detector sensitivity testing (NFPA 72 compliant) • Automatic device type-code verification • Point trouble identification • Waterflow selection per module point • Alarm verification selection per detector point • Maintenance alert warns when smoke detector dust accumulation is excessive • One-person audible or silent walk test with walk-test log and printout • System alarm verification selection per detector point • PAS (Positive Alarm Sequence) and Pre-signal per point (NFPA 72 compliant) • Up to 16 ANN-BUS annunciators-8 per each ANN-Bus • Remote Acknowledge, Alarm Silence, Reset and Drill via addressable modules or remote annunciator • Upload/Download of program and data via USB with optional FSTools Programming Utility SLC COMMUNICATION LOOP • Supports LiteSpeed™ and CLIP protocols • SLC operates up to 10,000 ft. (3,000 m) in LiteSpe

FAQs

What is the ES-200X and what is it compatible with?

ES-200X is an intelligent addressable Fire Alarm Control Panel that serves as a direct replacement for the MS-9200UDLS. It supports Fire•Lite addressable devices and up to 198 addressable devices (99 detectors and 99 modules).

How does the ES-200X communicate to the central station?

The panel comes with a pre-installed IPOTS-COM dual-technology communicator supporting POTS system status transmission and IP internet monitoring. Optional cellular reporting is available using CELL-MOD or CELL-CAB-FL over AlarmNet.

What programming options are available for the ES-200X?

Remote and local programming is supported using the FS-Tools Upload/Download utility via USB (USB flash drive) or via Ethernet through the IPOTS-COM communicator. Offline programming can be done in an office environment using Windows-based FS-Tools and then uploaded via an Ethernet connection.

Nov 2, 2026

Uploaded by Noah