Emerson & Holmes Woodshop/Art Room AC Upgrades - MEP Technical Specifications - Division 22 Basic Plumbing Requirements

Oct 28, 2026

MEP technical specification project manual for Livonia Public Schools covering AC upgrades for the Emerson & Holmes Woodshop/Art Room. Includes contract procurement and multiple MEP divisions, with detailed scope requirements for Division 22 Plumbing. Provides section-level requirements, including related documents, application across Division 22 plumbing work, site inspection obligations, alternates and substitutions procedures, deviations from basis of design, and plumbing materials expectations for equipment, controls, protective devices, and control wiring.

LanguageEnglish

CategoryResearch & Report

FormatPDF

Pages143

Reading Time6 h 0 min

AccessFree to download

Table of Contents

Division 00 - Procurement and Contracting Requirements

Division 22 - Plumbing

Division 23 - Heating, Ventilating, and Air-Conditioning (HVAC)

Division 26 - Electrical

Division 28 - Electronic Safety and Security

Section 22 0005 Basic Plumbing Requirements

Part 1 General

1.01 Related Documents

1.02 Application

1.03 Inspection of Site

1.04 Alternates and Substitutions

1.05 Deviations from Basis of Design Manufacturer

1.06 Materials

Unified Building Systems Engineering, LLC 75 N. Main St. Suite 221 Mt. Clemens, MI 48043 586-500-7055 LPS Emerson & Holmes Woodshop/Art Room AC Upgrades 15125 Farmington Rd. Livonia, MI 48154 MEP TECHNICAL SPECIFICATIONS LIVONIA PUBLIC SCHOOLS EMERSON & PROJECT MANUAL HOLMES WOODSHOP/ART ROOM AC UPGRADES UBS PROJECT: 001.23.04 FOR 001.23.04 LIVONIA EMERSON & HOLMES WOOD SHOP ACUBS PROJECT NUMBER: 001.23.04 LIVONIA PUBLIC SCHOOLS 15125 FARMINGTON RD. LIVONIA, MI 48154 DATE: 10/16/2023 PREPARED BY: UNIFIED BUILDING SYSTEMS ENGINEERING, LLC TABLE OF CONTENTS DIVISION 00-PROCUREMENT AND CONTRACTING REQUIREMENTS 00 0101 PROJECT TITLE PAGE DIVISION 22-PLUMBING 22 0005 BASIC PLUMBING REQUIREMENTS 22 0505 SELECTIVE DEMOLITION FOR PLUMBING 22 0517 SLEEVES AND SLEEVE SEALS FOR PLUMBING PIPING 22 0523 DUTY VALVES FOR PLUMBING PIPING 22 0553 IDENTIFICATION FOR PLUMBING PIPING AND EQUIPMENT 22 1005 PLUMBING PIPING DIVISION 23-HEATING, VENTILATING, AND AIR-CONDITIONING (HVAC) 23 0005 BASIC HVAC REQUIREMENTS 23 0505 SELECTIVE DEMOLITION FOR HVAC 23 0593 TESTING, ADJUSTING, AND BALANCING FOR HVAC 23 0713 DUCT INSULATION 23 0913 INSTRUMENTATION AND CONTROL DEVICES FOR HVAC 23 0925 DIGITAL CONTROL (DDC) SYSTEMS FOR HVAC 23 3100 HVAC DUCTS AND CASINGS 23 3300 AIR DUCT ACCESSORIES 23 7413 PACKAGED OUTDOOR CENTRAL-STATION AIR-HANDLING UNITS DIVISION 26-ELECTRICAL 26 0005 26 0505 26 0519 26 0526 26 0529 26 0533.13 26 0533.16 26 0553 26 0573 26 2813 26 2816.16 BASIC ELECTRICAL REQUIREMENTS SELECTIVE DEMOLITION FOR ELECTRICAL VOLTAGE ELECTRICAL POWER CONDUCTORS AND CABLES GROUNDING AND BONDING FOR ELECTRICAL SYSTEMS HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS CONDUIT FOR ELECTRICAL SYSTEMS BOXES FOR ELECTRICAL SYSTEMS IDENTIFICATION FOR ELECTRICAL SYSTEMS POWER SYSTEM STUDIES FUSES ENCLOSED SWITCHES DIVISION 28-ELECTRONIC SAFETY AND SECURITY 28 4600 FIRE DETECTION AND ALARM 001-23-04 Livonia Emerson TABLE OF CONTENTS 10-19-2023 Holmes Wood Shop AC LIVONIA PUBLIC SCHOOLS EMERSON & HOLMES WOODSHOP/ART ROOM AC UPGRADES UBS PROJECT: 001.23.04 SECTION 22 0005 BASIC PLUMBING REQUIREMENTS PART 1 GENERAL 1.01 RELATED DOCUMENTS A. This section applies to all sections of Division 22. B. Drawings and general provisions of the contract, including Division 00 and Division 01 specification sections, apply to work of this section. C. Provide all items, articles, materials, operations or methods listed, mentioned or scheduled on drawings and/or herein, including all labor, materials, equipment and incidentals necessary and required for their completion. D. The items in this section are supplementary to the requirements set forth in other portions of the specifications as indicated under item "A" above. 1.02 APPLICATION A. This section applies to all plumbing work. The contractors involved shall check all sections of the specifications in addition to the particular section covering their specific trade. Each distinct section of the specifications aimed for one trade may have detailed information with regards to other trades, therefore, it is imperative that all sections be reviewed to get a complete picture of all other trades' functions and work required. B. The plumbing contractor is responsible for the installation and operation of the plumbing systems. C. The plumbing contractor is responsible for receiving, unloading and placement of all of the owner provided equipment. 1.03 INSPECTION OF SITE A. Each Contractor shall visit the site prior to bid submission to determine all existing conditions that may affect his work and shall make appropriate allowances for such conditions in his bid. Failure to visit the site shall not be cause for a request for additional compensation later in the project during construction. B. The submitting of a proposal implies that the contractor has visited the site and understands the

FAQs

What does Section 22 0005 cover within the project manual?

Section 22 0005 covers basic plumbing requirements and applies to all plumbing work under Division 22, including coordination and responsibilities for installation and operation of plumbing systems.

What are the contractor site inspection requirements?

Each contractor must visit the site prior to bid submission to determine existing conditions that may affect the work and must make appropriate bid allowances; failure to visit is not grounds for later additional compensation.

How are alternates and substitutions handled?

Alternates and substitutions follow Division 01-General Requirements procedures for submitting products from a manufacturer not listed as approved equal in the specifications.

Oct 28, 2026

Upload by Sophia Brooks