ECUTools Vietnam Pinout - Dimsport Bench Mode Bosch ME17.9.71 Royal Enfield - User Manual

Oct 25, 2026

This technical user manual provides detailed instructions for the Dimsport New Trasdata connection process for the Bosch ME17.9.71 IROM TC1724 EGPT engine control unit used in Royal Enfield motorcycles. It specifically covers the wiring configuration for bench mode communication, detailing the necessary cable colors for power, ground, CAN bus, and GPT signals. The guide emphasizes the importance of using a stabilized power supply during the connection procedure and references specialized cables to ensure correct communication and data reading from the ECU.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages2

Reading Time5 min

AccessFree to download

Bosch ME17.9.71 IROM TC1724 EGPT Royal Enfield

Plugin 1527: New Trasdata

Connections

EGPT Connection

FAQs

What is the purpose of the New Trasdata tool mentioned in the manual?

The New Trasdata tool is used to establish communication with the Bosch ME17.9.71 ECU for reading or programming purposes.

Which wire colors correspond to the CAN bus connection?

The Green wire is used for CAN L, and the White wire is used for CAN H.

What precaution should be taken after connecting the wires to the ECU?

After connecting all wires, you must connect a stabilized power supply to the New Trasdata and ensure that the red POWER LED is illuminated.

Oct 25, 2026

Upload by River Wang