Driver/Operator Minimum Job Performance Requirements - Chapter 4 Test Construction Guide

Sep 18, 2026

Uploaded by James

NFPA Standard 1002 (2017) Chapter 4 outlines a Test Construction Guide for Driver/Operator skills examinations. It specifies that the practical skills exam includes selected skill sheets totaling five overall, chosen randomly by a Test Control Officer from each category using a provided matrix. The setup requires at least two stations with different certified evaluators, with appropriate PPE worn unless otherwise indicated. It includes a detailed skills sheet for preventative maintenance pre-trip and a driving job performance skill area with defined tasks, conditions, and performance outcomes.

LanguageEnglish

CategoryExam

FormatPDF

Pages13

Reading Time33 min

AccessFree to download

Test Construction Guide

Test setup and selection method

Driver/Operator minimum job performance requirements

Skill Sheet examples (JPR 4.2.1(2) and JPR 4.3.1)

NFPA Standard 1002, 2017 Edition, Chapter 4 Test Construction Guide At a minimum, the practical skills examination will include skills selected from each category with a total of 5 skill sheets selected. The Test Control Officer will randomly select the prescribed number of skill sheets per category using the matrix below. The exam should be set up using at least two stations with a different certified evaluator at each station. It is expected that appropriate PPE shall be worn for all stations, unless otherwise indicated within the skill sheet. Driver/Operator Minimum Job Performance Requirements | Skill
Sheet | NFPA Section | Tasks | Minimum Selection Required:
5 Mandatory (for total of 5 Skill Sheets selected) | | --- | --- | --- | --- | | | Random Skills | | | | 1. | 4.2.1(2) | General Skill Requirement: Perform
Preventative Maintenance Pre Trip | Verify Locally AHJ | | 8. | 4.3.7 | General Skill Requirement: Perform Weekly Inspection | | | | Mandatory Skills | | | | 2. | 4.3.1 | General Skill Requirement: Drive a Fire Department Vehicle | Select 5 Mandatory Skill Sheets from this category | | 3. | 4.3.2 | General Skill Requirement: Driving Backing Test / Alley Dock | | | 4. | 4.3.3 | General Skill Requirement: Driving Serpentine | | | 5. | 4.3.4 | General Skill Requirement: Driving Confined Space | | | 6. | 4.3.5 | General Skill Requirement: Driving Diminishing Clearance | | | 7. | 4.36 | General Skill Requirement: Driving a Fire Vehicle on a Simulated Response | | Candidate Name Skill Sheet 1 IFSAC ID Date | NFPA STANDARD: 1002 , 2017 edition | | JPR: 4.2. 1(2) | | SKILL AREA: General Skill Requirement:
Perform Preventative Maintenance Pre Trip | | | | | | --- | --- | --- | --- | --- | --- | --- | --- | --- | | TASK: The candidate shall perform, document, and complete daily routine tests, inspections, and servicing functions on specified systems and components so that the operational status of fire department vehicle is verified. | | | | | | | | | | CONDITIONS: Given a fire department vehicle and the provided vehicle inspection checklist, the candidate shall
demonstrate the ability to: ( Note: candidate may use sample checklist or AHJ’s checklist) . | | | | | | | | | | PERFORMANCE OUTCOME: The candidate shall demonstrate the ability to use hand tools, recognize system problems and correct any deficiency noted, with completed departmental forms, according to policies and procedures of the AHJ. | | | | | | | | | | NO. | TASK STEPS | | | | FIRST TEST | | RETEST | | | | | | | | Pass | Fail | Pass | Fail | | 1. | Inspect and walk around apparatus as they approach, looking for signs of damage or leaks | | | | | | | | | 2. | Check batteries for fluid level,(if applicable)corrosion, and tie downs | | | | | | | | | 3. | Check braking system fluid level or air pressure | | | | | | | | | 4. | Check coolant system for fluid levels, leaks, cleanliness | | | | | | | | | 5. | Check electrical system, including warning devices, headlights, running lights, turn signals, and warning lights | | | | | | | | | 6. | Check fuel level | | | | | | | | | 7. | Check hydraulic fluids for level and leaks (if applicable) | | | | | | | | | 8. | Check engine oil for fluid level and leaks | | | | | | | | | 9. | Check tires for air pressure and wear | | | | | | | | | 10. | Check steering system excessive looseness | | | | | | | | | 11. | Check engine belts for tightness and wear | | | | | | | | | 12. | Check tools, appliances, equipment, lighting | | | | | | | | | 13. | Check windshield, wiper blades, and washer fluid level | | | | | | | | | 14. | Start apparatus; monitor gauges and control devices | | | | | | | | | 15. | Recognize system problems; document and correctly report any deficiencies | | | | | | | | | 16. | Check all exterior equipment for general condition | | | | | | | | | Overall Skill Sheet Score | | |

FAQs

How are skill sheets selected for the Driver/Operator exam?

The Test Control Officer randomly selects the prescribed number of skill sheets per category using the matrix, with a total of 5 skill sheets selected across categories.

What are the minimum requirements for exam stations and evaluators?

The exam must be set up using at least two stations, and each station must use a different certified evaluator.

What does the preventative maintenance pre-trip skill require?

The candidate must perform, document, and complete daily routine tests, inspections, and servicing functions to verify the operational status of the fire department vehicle, using provided checklists and completing required forms.

Sep 18, 2026

Uploaded by James