Digital Press Certification Application Data Sheet - FUJIFILM Revoria Flow EC21 for Revoria Press EC2100S/EC2100

Sep 10, 2026

Upload by Eden

Digital press certification application data sheet detailing the certification process and target printing conditions for FUJIFILM Revoria Press EC2100S/EC2100 equipped with Revoria Flow EC21 DFE. It specifies manufacturer and product components, substrates and reference conditions, system overview including toner capabilities, and a step-by-step workflow for calibration, creation of destination profiles, device link profile generation, and print test form execution. The document includes measurement instruments, calibration target parameters, color measurement and verification steps to replicate consistent production results.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages4

Reading Time10 min

AccessFree to download

Digital Press Certification Application Data Sheet

Manufacturer and Product Information

Overview

System Components and Printing Procedure

Calibration Target

Calibration

Create Destination Profiles

Creating Device Link Profile

Print Testform

Finishing Procedures (Optional)

Additional Data (Optional)

| | Digital Press Certification Application Data Sheet | | --- | --- | FUJIFILM Revoria Flow EC21 for Revoria Press EC2100S/EC2100 Note: Certification is in accordance with Idealliance Digital Press Certification Program v2.3 (Increment version number as necessary) The Idealliance Print Properties Digital Print Working Group has established a certification process for digital production presses (xerographic/inkjet) . The following information is intended to assist printers and customers in understanding the printing conditions and how they were achieved and/or to replicate these results on a similar system. I. Manufacturer FUJIFILM Business Innovation Corp. II. Product Name Print Engine : Revoria Press EC2100S/EC2100 DFE : Revoria Flow EC21 Substrate : Blazer Digital 100 Gloss Text(148gsm) Reference Condition: GRACoL2013_CRPC6 III. Overview Revoria Press EC2100S is equipped with a specialty toner station in addition to the four-colour toners, enabling five-colour printing in one pass, and Revoria Press EC2100 are four-colour press. The presses are compact in size with high print quality and speed. Both Revoria Press EC2100S and Revoria Press EC2100 achieve a high productivity of 100ppm with four-color toners. The Revoria Flow EC21 performs RIP processing at 1,200 dpi and 10-bit colour, generating high-quality image data. - IV. System Components and Printing Procedure System Components Printer: No additional system components were required beyond a nominal Revoria Press EC2100S/EC2100 . DFE: Revoria Flow EC21 Paper: Blazer Digital 100 Gloss Text(148gsm) Software: Print Station Measurement: X-Rite i1Pro2/i1Pro3, Eye-one iSis2 XL /M1 Printing Procedure 1) Create the Calibration Target (1) Select [Calibration] > [Target] (2) Select +Create (CMYK) (3) Set the setting below and press [Next] Scanner： i1Pro3(M2)/IiPro2(M2) Calibration Method： Advanced Halftone： 200dot Tray： Tray to use (4) Setting below and press [Print] . After the printing out, click the [Next] Output Quantity(Sheets)： 7 (5) Measure the chart with i1Pro2/i1Pro3 .Select [User Colorimetry Application] and press [Start] (6) Color Measurement Utility starts. Measure the chart according to the instruction. (7) Press [save] the Calibration Target. 2) Calibration (1) Select [Calibration] > [Calibration] . (2) Select +Create. (3) Select Spectrophotometer Type “Spectrophoto…”. (4) At ”Create Calibration” panel, set the settings below and [Next] . Calibration Method： Advanced Calibration target： select the file created at 1-8) Halftone： 200dot Tray：Applied tray (5) Select “Create Calibration” panel, and press [print] . (6) Select[Use Colorimetry Application] and press [Start] . (7) Measure the last chart according to the instruction. (8) After papers out, press [Verify] so that check the result of the Calibration. (9) Check the status on [View Result-Status After Calibrating 1 Times] . (10) Press [save] to assign calibration file to paper stock or tray. 3) Create Destination Profiles (1) Select [Color]>[CMS] (2) Press [Destinaiton Profile] and +(create) (3) Press [Start (1)] to print “Output Chart” at Step1 . (4) Set the setting below and press [Print] . Chart Type： CPMP_Full_iSisXL Tray： Tray to use Halftone： 200dot Calibration： Select a Calibration file Copies： 7 (5) Measure the color patches and save it. (6) Come back to Destination Profile/Spot Color Profile dialogue. Select [Start(3)] on Step3 to Create Profile. (7) Set the settings below and press [OK] . Printer Characteristics Settings： Select the measured file. Specify Pattern Data: Pattern Date： CPMP_Full_ [1584.pt](1584.pt)n 4) Creating Device Link Profile (1) Select [Color]>[CMS] (2) Press [Device Link Profile] and +(create) (3) Create a new Device Link Profile with these settings below. [Profile] Print Target Characteriation Data： GRACoL2013 CRPC6 Print Characterization Data

FAQs

What products and components are specified for the certification application?

The sheet lists FUJIFILM Business Innovation Corp. as the manufacturer, with Revoria Press EC2100S/EC2100 as the print engine and Revoria Flow EC21 as the DFE. It also specifies the substrate Blazer Digital 100 Gloss Text (148gsm) under the reference condition GRACoL2013_CRPC6.

How is the calibration target created in the workflow?

Select Calibration > Target, choose +Create (CMYK), set scanner (i1Pro3(M2) / i1Pro2(M2)), calibration method to Advanced, halftone to 200dot, and choose the tray. Print the target, then measure it using the colorimetry application, save the calibration target, and proceed.

How are destination profiles and device link profiles generated?

Destination profiles are created under Color > CMS by printing an output chart at step 1, measuring color patches, and creating profiles via Start on step 3 with specified chart and tray settings. Device link profiles are created under Color > CMS by selecting GRACoL2013 CRPC6 characterization data, setting paper white adjustment and reproduction options, then creating the profile via Start.

Sep 10, 2026

Upload by Eden