DDF485 - Instruction Manual - Cordless Driver Drill

Nov 4, 2026

Instruction manual for the DDF485 cordless driver drill, providing technical specifications, intended use, and key safety requirements. Includes drilling and fastening capacities, no-load speeds, dimensions, rated voltage, noise and vibration measurements with warnings for hearing and vibration exposure protection. Covers applicable battery cartridges, usage restrictions, and EC declaration of conformity for European countries. Provides general power tool safety warnings and specific cordless driver drill safety warnings, emphasizing proper handling, insulated gripping surfaces, firm footing, and safe operation practices.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages65

Reading Time2 h 44 min

AccessFree to download

Specifications

Intended use

Noise

Vibration

Safety warnings

General power tool safety warnings

Cordless driver drill safety warnings

Important safety instructions for battery cartridge

Ihr Fachhändler für Tore, Türen und Antriebe. | | Cordless Driver Drill INSTRUCTION MANUAL 4 | | | --- | --- | --- | | EN | | | | | | | | | Perceuse-Visseuse sans Fil MANUEL D’INSTRUCTIONS 9 | | | FR | | | | | | | | DE Akku-Bohrschrauber BETRIEBSANLEITUNG 15
| | | | IT Trapano avvitatore a batteria ISTRUZIONI PER L’USO 21
| | | | | | Accuschroefboormachine GEBRUIKSAANWIJZING 27 | | NL | | | | | | | | | | Atornillador Taladro Inalámbrico
MANUAL DE
INSTRUCCIONES
33 | | ES | | | | | | | | | | Parafusadeira/Furadeira a
Bateria
MANUAL DE INSTRUÇÕES 39 | | PT | | | | | | | | | | Akku skrue-/boremaskine BRUGSANVISNING 45 | | DA | | | | | | | | | | Δραπανοκατσάβιδο
μπαταρίας
ΕΓΧΕΙΡΙΔΙΟ ΟΔΗΓΙΩΝ 50 | | EL | | | | | | | | | | Akülü Matkap Tornavida KULLANMA KILAVUZU 56 | | TR | | | | | | | DDF485 |
Fig.11 | | | --- | --- | | | 1
1 | | --- | --- | ENGLISH (Original instructions) SPECIFICATIONS | Model: | | DDF485 | | --- | --- | --- | | Drilling capacities | Steel | 13 mm | | | Wood | 38 mm | | Fastening capacities | Wood screw | 6 mm x 75 mm | | | Machine screw | M6 | | No load speed | High (2) | 0-1,900 min-1 | | | Low (1) | 0-500 min-1 | | Overall length | | 169 mm | | Rated voltage | | D.C. 18 V | | Net weight | | 1.4-1.7 kg | • Due to our continuing program of research and development, the specifications herein are subject to change without notice. • Specifications may differ from country to country. • The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest combination, according to EPTA-Procedure 01/2014, are shown in the table. Applicable battery cartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 / BL1840B / BL1850 / BL1850B / BL1860B • Some of the battery cartridges listed above may not be available depending on your region of residence. WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges may cause injury and/or fire. Intended use The tool is intended for drilling and screw driving in wood, metal and plastic. Noise The typical A-weighted noise level determined according to EN60745-2-1: Sound pressure level (LpA) : 74 dB(A) Uncertainty (K) : 3 dB(A) The noise level under working may exceed 80 dB (A) . WARNING: Wear ear protection. Vibration The vibration total value (tri-axial vector sum) determined according to EN60745-2-1: Work mode: drilling into metal Vibration emission (ah,D) : 2.5 m/s2 or less Uncertainty (K) : 1.5 m/s2 NOTE: The declared vibration emission value has been measured in accordance with the standard test method and may be used for comparing one tool with another. NOTE: The declared vibration emission value may also be used in a preliminary assessment of exposure. WARNING: The vibration emission during actual use of the power tool can differ from the declared emission value depending on the ways in which the tool is used. WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such asthe times when the tool is switched off and when it is running idle in addition to the trigger time) . EC Declaration of Conformity For European countries only The EC declaration of conformity is included as Annex Ato this instruction manual. SAFETY WARNINGS General power tool safety warnings WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. 4 ENGLISH Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. Cordle

FAQs

What are the main specifications for the DDF485 cordless driver drill?

The manual lists drilling capacities for steel (13 mm) and wood (38 mm), fastening capacities for wood screws (6 mm x 75 mm) and machine screws (M6), plus no-load speeds and overall length. It also provides rated voltage and net weight.

Which battery cartridges are allowed for the DDF485?

The document enumerates the compatible battery cartridge models (e.g., BL1815N, BL1820, BL1830, BL1840, BL1850, BL1860B variants). It warns to use only the listed battery cartridges to avoid injury and/or fire.

What safety measures are required regarding noise and vibration?

The manual reports A-weighted sound pressure level and vibration values, including uncertainty. It warns to wear ear protection and to identify safety measures that protect the operator based on exposure estimation in actual operating conditions.

Nov 4, 2026

Uploaded by Supernature