D/CRCW e3 Standard Thick Film Chip Resistors

Nov 2, 2026

Uploaded by （）

D/CRCW e3 standard thick film chip resistors deliver stability across environmental conditions with ΔR/R ≤ 1% under rated power at 70 °C and are qualified to AEC-Q200. The series offers multiple pitch and package sizes, including 2 mm pitch options for 0603, and provides defined resistance tolerances (±5% and ±1%) plus temperature coefficients (±200 ppm/K and ±100 ppm/K). Typical use targets automotive, industrial, and telecommunication electronics requiring reliable performance.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages13

Reading Time33 min

AccessFree to download

FEATURES

APPLICATIONS

TECHNICAL SPECIFICATIONS

OPERATION AND MAXIMUM RESISTANCE CHANGE

TEMPERATURE COEFFICIENT AND RESISTANCE RANGE

APPLICATION INFORMATION

D/CRCW e3 [www.vishay.com](www.vishay.com Vishay)[ Vishay](www.vishay.com Vishay) Standard Thick Film Chip Resistors FEATURES • Stability at different environmental conditions ΔR/R ≤ 1 %(1000 h rated power at 70 °C) • 2 mm pitch packaging option for 0603 size • AEC-Q200 qualified • Material categorization: for definitions of compliance please see [www.vishay.com/doc?99912](www.vishay.com/doc?99912) APPLICATIONS • Automotive • Industrial • Telecommunication D/CRCW e3 standard thick film chip resistors are the perfect choice for most fields of modern electronics where high reliability and stability are of major concern. Typical applications include automotive, telecommunications, and industrial. | TECHNICAL SPECIFICATIONS | | | | | | | | | | --- | --- | --- | --- | --- | --- | --- | --- | --- | | DESCRIPTION | D10/
CRCW0402
e3 | D11/
CRCW0603
e3 | D12/
CRCW0805
e3 | D25/
CRCW1206
e3 | CRCW1210
e3 | CRCW1218
e3 | CRCW2010
e3 | CRCW2512
e3 | | Imperial size | 0402 | 0603 | 0805 | 1206 | 1210 | 1218 | 2010 | 2512 | | Metric size code | RR1005M | RR1608M | RR2012M | RR3216M | RR3225M | RR3246M | RR5025M | RR6332M | | Resistance range | 1 Ω to 10 MΩ; jumper (0 Ω) | | | | | 1 Ω to
2.2 MΩ; jumper (0 Ω) | 1 Ω to 10 MΩ; jumper (0 Ω) | | | Resistance tolerance | ± 5 %; ± 1 % | | | | | | | | | Temperature coefficient | ± 200 ppm/K; ± 100 ppm/K | | | | | | | | | Rated dissipation, P70 (1)(2) | 0.10 W | 0.125 W | 0.25 W | 0.25 W | 0.5 W | 1.0 W | 0.75 W | 1.0 W | | Operating voltage, Umax. AC RMS/DC (2) | 75 V | 75 V | 150 V | 200 V | 200 V | 200 V | 400 V | 500 V | | Permissible film
temperature, ϑF max. (1) | 155 °C | | | | | | | | | Operating
temperature range | -55 °C to +155 °C | | | | | | | | | Permissible voltage against ambient (insulation):
1 min, U ins | 100 V | 100 V | 200 V | 300 V | 300 V | 300 V | 300 V | 300 V | | Failure rate: FIT observed | ≤ 0.1 x 10-9/h | | | | | | | | Notes (1) Please refer to “Application Information” below (2) Please refer to “Maximum Resistance Change at Rated Dissipation and Operating Voltage” table, see below APPLICATION INFORMATION When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted film temperature is not exceeded. These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. Revision: 14-Apr-2026 1 Document Number: 20035 For technical questions, contact: thickfi[lmchip@vishay.com](lmchip@vishay.com) THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, [SET FORTH AT](SET FORTH AT www.vishay.com/doc?91000)[ ](SET FORTH AT www.vishay.com/doc?91000)[www.vishay.com/doc?91000](SET FORTH AT www.vishay.com/doc?91000) D/CRCW e3 [www.vishay.com](www.vishay.com Vishay)[ Vishay](www.vishay.com Vishay) | MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION AND OPERATING VOLTAGE | | | | | --- | --- | --- | --- | | OPERATION MODE | | STANDARD | EXTENDED | | Rated dissipation, P70 | D10/CRCW0402 e3 | 0.063 W | 0.10 W | | | D11/CRCW0603 e3 | 0.10 W | 0.125 W | | | D12/CRCW0805 e3 | 0.125 W | 0.25 W | | Operating voltage, Umax. AC RMS/DC | D10/CRCW0402 e3 | 50 V | 75 V | | | D11/CRCW0603 e3 | 75 V | 75 V | | | D12/CRCW0805 e3 | 150 V | 150 V | | Resistance change | | 1 Ω to 10 MΩ | | | Max. resistance change at P70/Umax. AC RMS/DC for resistance change, IΔR/RI after(1): | 1000 h | ≤ 1 % | ≤ 2 % | | | 8000 h | ≤ 2 % | - | Note (1) Applies to components with stability class 1

FAQs

What stability performance is specified for the D/CRCW e3 resistors?

The document specifies stability across environmental conditions with ΔR/R ≤ 1% (1000 h rated power at 70 °C).

What are the typical application areas for the D/CRCW e3 series?

Typical applications include automotive, telecommunications, and industrial fields where high reliability and stability are required.

Which key electrical and thermal parameters are provided in the technical specifications?

The document lists resistance range, resistance tolerance, temperature coefficient, rated dissipation (P70), maximum operating voltage, allowable film temperature, operating temperature range, insulation voltage, and failure rate data.

Nov 2, 2026

Uploaded by （）