Cutting tools for CLT - Product brochure - U-P IIW and U-PII W

Sep 15, 2026

Upload by Quinn

Cutting tools for CLT focuses on coated insert and tool-edge solutions for wood processing, emphasizing longer tool life, reduced power consumption, and improved cutting performance. The brochure highlights KANEFUSA coating technology with self-sharpening effects, and compares wear against uncoated competitors. It presents specific product types including end mills, hogger cutters, dovetail cutters, strob saw blades, and drills, with features, available sizes, cutting parameters, and monitoring results that support lower noise and longer service intervals.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages6

Reading Time15 min

AccessFree to download

Cutting tools for CLT

Coated insert features and wear comparison

Lineup: inserts, endmill, hogger cutter, dovetail cutter

Strob saw blade and drill

Cutting examples and available sizes

Cutting tools for CLT * The appearance and speci cations of our products may be changed without prior notice. Also, photographs, gures and full-size drawings may not be exact and are for reference only Head Of ce/ Main Factory 0-69E- Cutting tools for CLT High quality surface-reduce fuzzy grain and burning Coated Insert “UPII W”for wood processing Reduced down-times with longer tool life PAT. EP2939806B1, US10201908B2 Coated Carbide Inserts “ U-PII W ” Features Kanefusa's coating technology with self-sharpening effects, maintains a sharp edge for longer tool life and reduces power consumption. Comparison of wear Uncoated Round edge Coated (U-PII W) Sharp edge 50% Reduction 0 5 10 15 20 25 Time (sec)" UP ⅡW " saves 40-55% cutting power because of the superior wear resistance compared with other carbides of competitors. Lineup • 11 x 11 x 1.5 • 15 x 15 x 2.5 • 22x 19 x 2.0（triangle） Example Material : European Pine Laminated Timber Cutting Parameter : N=4,000rpm F=1m / min Blade Outer Diameter : Φ200 After Cutting : 300m Competitor Uncoated Cutting Surface KANEFUSA Coated (U-PII W) Coating Surface Coating Surface Cutting Surface Cutting tools for CLT Endmill Edge Material U-P ⅡW Available Sizes | HSK | ΦD | L1 | L2 | | --- | --- | --- | --- | | HSK 63E | 50~60 | ~300 | ~270 | | HSK 80A/C/F | 50~80 | ~300 | ~270 | | HSK 100A/C | 50~80 | ~270 | ~240 | Hogger Cutter Edge Material U-P ⅡW High quality surface-reduce fuzzy grain and burning Coated Insert “U-PII W”for wood processing Reduced down-times with longer tool life Features • The integrated structure of the HSK section and blade body provides enhanced rigidity, minimizes fluffing and plucking, and ensures excellent cutting quality. • The unique flute shape ensures optimal chip evacuation and prevents burning. Example Processing : Hollowing out，Milling Material : Ceder CLT Tools : HSK80Fx 60 x 325 x 250 x4P Cutting Parameter : N=9,000rpm F=2 .5m / min Monitor test results CASE① Reduced the work noise. Achieved three times longer compared to other brand. CASE② Achieved two times longer tool life compared to other brand (45→90days) . Features • Aluminum body minimizes the weight of cutterhead. • The helical arrangement of blades reduces cutting resistance and achieves excellent surface. Example Processing Material Available Sizes Tools : Rabbet grooving for panel (wall / floor) joint: Ceder CLT : D≦400 : 12P 400 x 60-75 x 45 Cutting Parameter : N=4,300rpm F=14 .4m / min Grooving Competitor Uncoated KANEFUSA Coated (U-PII W) Cutting tools for CLT High quality surface-reduce fuzzy grain and burning Coated Insert “UPII W”for wood processing Reduced down-times with longer tool life Competitor Uncoated Dovetail Cutter Edge Material U-P ⅡW Features • Specially designed suitable cutting angles which minimize chip-out. • Swarf is efficiently removed and material burning is prevented thanks to our unique gullet design. Example Processing Material Tools : Dovetail : Spruce Laminated Timber: 30 x 60 x 150 x 35 x6P Cutting Parameter : N=12,000rpm F=12m / min KANEFUSA Coated (U-PII W) Strob Saw Blade Edge Material Tungsten Carbide Application Large strob sawblades are specialized in CLT / large section integrated lumber cutting. Features • Stable and flat plate enables precise run-out for smoother finish and exact dimensions. • Arranged suitable wipers to reduce the contact between timber and saw body. Lineup Machine ・ Hundegger K2i 900 x 8.0 x 6.0 x 30 x 54, 1000 x 8.0 x 6.0 x 30 x 36 ・ Hundegger PBA 1000 x 8.5 x 6.0 x 40 x 36, 1100 x 8.5 x 6.0 x 40 x 36 ・Technowood 1100 x 8.5 x 6.0 x 40 x 36, 1150 x 8.5 x 6.0 x 40 x 36 ・Uniteam 850 x 8.0 x 6.0 x 30 x 60 Cutting tools for CLT Drill Edge Material Tungsten Carbide Features • Specialized edge design to prevent chip-out and burr at the exit

FAQs

What advantages do the U-PII W and U-P IIW coatings provide for CLT cutting?

The coatings use self-sharpening effects to maintain a sharp edge longer, reduce power consumption, and improve wear resistance during wood processing.

Which tool types are included in the CLT cutting lineup?

The document covers endmill, hogger cutter, dovetail cutter, strob saw blade, and drill, each with edge materials, features, and application notes.

How do the document’s monitoring cases evaluate performance improvements?

CASE① reports reduced work noise, while CASE② reports about two times longer tool life compared with another brand, extending service from 45 to 90 days.

Sep 15, 2026

Upload by Quinn