CRL 64 - Belt Sander - Model BM64B - Set-up and Operating Instructions

Aug 25, 2026

Upload by Violet

CRL Model BM64B is a water-cooled belt sander designed for finishing the edges of glass panels (“lites”). The instructions explain machine setup, uncrating, and safety information, then guide safe belt-sander operation and required equipment. The document covers lubrication, maintenance schedules, pulley and motor handling, belt and roller platen changes, reference photos, replacement parts, troubleshooting, and wiring diagrams to support safe long-term use and reliable performance.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages14

Reading Time35 min

AccessFree to download

Specifications

Introduction

Uncrating

Safety Information

Machine Set Up

Setting Up

General Guidelines

Using the Belt Sander

Equipment Needed

Maintenance

Maintenance Schedule

Lubrication

Recut or Replace Pulleys

Remove and Install Motor

Remove and Install Sanding Belt/Pulleys/Roller Platen

Upper Pulley and Roller Platen Shaft and Bearings

Reference Photos

Photos for Reference

Replacement Parts Drawing

Replacement Parts List

Common Replacement Parts List w/Photos

Troubleshooting

Troubleshooting Chart

Wiring Schematic

Wiring Diagram

CRL 64” BELT SANDER MODEL BM64B FOR 102 x 1625mm SANDING BELTS (Starting with Serial NO. 69292) Includes AUBM64B for Australia SET-UP and OPERATING INSTRUCTIONS [crlaurence.com](crlaurence.com) ●Toll Free (800) 421-6144 ● Fax (800) 262-3299 CALL TOLL FREE ANYWHERE IN THE U.S. AND CANADA ● ALL PRODUCTS F.O.B. NEAREST WAREHOUSE 11M0411_9-14-19 CRL 64” BELT SANDER MODEL BM64B FOR 102 x 1625mm SANDING BELTS BM64B Machine Specifications 115VAC | | Dimensions: 686 x 457 x 991mm high | | | --- | --- | --- | | | 27” x 18” x 39” high | | | | Shipping Weight: | 91 kg. (200 Lbs.) | | | Motor: | .745 Kw (1HP) | | | Volts: | 115VAC | | | Amps: | 12.4@115V | | | Phase/Hertz: | 1/60 | | | Max RPM: | 1725 | | | Sanding Belt | 102 x 1625mm (4” x 64”) | | | AUBM64B Machine
Dimensions:
Shipping Weight:
Motor:
Volts:
Amps:
Phase/Hertz:
Max RPM:
Sanding Belt | Specifications 230VAC
686 x 457 x 991mm high 27” x 18” x 39” high
91 kg. (200 Lbs.)
.745 Kw (1HP) 230VAC
6.2@230V 1/50 1725
102 x 1625mm (4” x 64”) | [crlaurence.com](crlaurence.com) ●Toll Free (800) 421-6144 ● Fax (800) 262-3299 2 CALL TOLL FREE ANYWHERE IN THE U.S. AND CANADA ● ALL PRODUCTS F.O.B. NEAREST WAREHOUSE CRL 64” BELT SANDER MODEL BM64B FOR 102 x 1625mm SANDING BELTS Contents Page Specifications ............................................................................................................. 2 Contents ............................................................................................................. 3 1.0 Introduction ........................................................................................................... 4 1.1 Introduction .................................................................................................... 4 1.2 Uncrating ....................................................................................................... 4 1.3 Safety Information ......................................................................................... 4 2.0 Machine Set Up ..................................................................................................... 5 2.1 Setting Up ...................................................................................................... 5 3.0 General Guidelines ............................................................................................... 5 3.1 Using the Belt Sander ................................................................................... 5 3.2 Equipment Needed ........................................................................................ 5 4.0 Maintenance .......................................................................................................... 6 4.1 Maintenance Schedule .................................................................................. 6 4.2 Lubrication ..................................................................................................... 6 4.3 Recut or Replace Pulleys .............................................................................. 6 4.4 Remove and Install Motor ............................................................................. 7 4.5 Remove and Install Sanding Belt/Pulleys /Roller Platen .............................. 7 4.6 Upper Pulley and Roller Platen Shaft and Bearings ..................................... 8 5.0 Reference Photos ................................................................................................. 8 5.0 Photos for Reference .................................................................................... 8 6.0 Replacement Parts Drawing ................................................................................ 9 6.1 Replacement Parts List ............................................................................... 10 6.2 Common Replacement Parts List w/Photos ............................................... 11

FAQs

What is the CRL Model BM64B belt sander used for?

It is intended for finishing the edges of glass panels (“lites”).

How is the BM64B designed to support long service life?

It uses a water-cooled system with features like direct drive, a gas cylinder-tensioned upper pulley, safety shields, sealed ball bearings to reduce routine lubrication, and a rust-proof HDPE water tank, with emphasis on proper care and reasonable maintenance.

What major topics are covered in the instructions for maintenance and repairs?

The document includes maintenance schedule and lubrication, instructions for recutting or replacing pulleys, removing and installing the motor, changing the sanding belt/pulleys/roller platen, and guidance for troubleshooting and wiring diagrams.

Aug 25, 2026

Upload by Violet