CONAIR Model HC95WNC - Instruction Booklet - Care of Your Clippers

Oct 23, 2026

Instruction booklet for Conair hair clippers, Model HC95WNC, covering haircut guidance and detailed user maintenance. It provides blade maintenance steps, including applying oil before, during, and after use, checking and realigning blades for correct alignment, and reinstalling cutter and numbered cutting comb components. It also includes numbered safety instructions for household use, with warnings about water exposure, supervision around children, safe operation, cord handling, and proper storage.

LanguageEnglish

CategoryHealthcare

FormatPDF

Pages1

Reading Time3 min

AccessFree to download

USER MAINTENANCE

CARE OF YOUR CLIPPERS

MAINTENANCE OF THE BLADE

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING

STORAGE

OILING INSTRUCTIONS

For the front to the crown,cut the hair againstthe direction in which it grows.Then even it up with the sides. For a flat top,use the flat comb,not the attachment comb.Just cut hair on top of the head over the flat comb.(Fig.2). To taper hair down to the neckline,use attachment comb\#1.Comb hair and check for uneven spots.Outline sideburns and neck areas (see “Outlining”). Fig2 # USER MAINTENANCE CARE OF YOUR CLIPPERS MAINTENANCE OF THE BLADE Always apply oil to the blades before,during and after use.This willensure maximum cutting performance.Hold clipper away from your body in a downward position and apply oil on the front and sides of the cutter blade. Wipe excess oil off with a soft dry cloth.Conair hair clippers are carefully inspected to insure that the blades are in perfect alignment.You willneed to realign the blades after removing them for cleaning or replacement,or if they should be knocked out of alignment.How can you tell f theblades need realigning?Simply match them up, point for pointto conform with the drawing be- low.To replace cutting comb and cutter after re- NUMBER CUT° # NUMBERED CODED COMB GUIDE HAIRCUT KIT Have a Question? Please do not return this product to the retailer. Call Us First! Our customer service and product experts are ready to answer Please call our TOLL-FREE customer ser- vice number at:1-855-926-6247 or visit us online at www.conaircanada.ca Model HC95WNC Instruction Booklet CONAR moval for cleaning,replacement or,because they are out of alignment,slide the cutter back on to the black plastic oscillating head.Next,you must make sure that the cutter (small blade)and the cutting comb (large blade)are properly aligned. Line up the new or existing cutting comb with the two screw holes.Place the original screws, one in each hole,and lightly tighten with a Phillips head screwdriver. Fig 3 Large blade (cutting comb) Blade Screws_ Small blade (cutter) Then,match the two blades up,point to point, conforming with the illustration below in(Fig.4). Fig 4 1/32”to 1/16” Cutting Comb(large blade) *The top edge of the cutting comb shouldbe 1/32”to 1/16”(.79 mm.to 1.59_mm.) higher than the top edge of the cutter.This is important so that the clipper does not cut too close,or come in contact with the skin. *The extreme left-hand tooth of the cutting comb must cover or be to the extreme left hand of the first small tooth of the cutter. *Be sure that the extreme right hand big tooth ofthe cutter touches the extreme right hand tooth # IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances,especially when children are present,basic safety precautions should always be followed,including the following: # READ ALL INSTRUCTIONS BEFORE USING KEEP AWAY FROM WATER FOR HOUSEHOLD USE ONLY DANGER- Any appliance is electri- cally live,even when the switch is off.To reduce the risk of death or injury by electric shock: 1.Do not reach for an appliance that has fallen into water.Unplug immediately. 2.Do not use while bathing or in the shower. 3.Do not place or store appliance where it can fall or be pulled into a tub or sink.Do not place in or drop into water or other liquid. 4.Always unplug this appliance from the electrical outlet immediately after using. 5.Unplug this appliance before cleaning. DO NOT REACH INTO THE WATER WARNING- To reduce the risk of burns,electrocution,fire,or injury to persons: 1.The appliance should never be left unattended when plugged in. 2.Close supervision is necessary when this of the cutting comb. CAUTION:Never pull on the clipper cord. Never twist or wrap the cord around the clipper.Lay it flat with the cord coiled up when not in use. For new blades,send check or money order for $8.00(which includes postage and handling)to: Conair Consumer Products ULC 100 Conair Park

FAQs

How often should the clipper blades be oiled?

Apply oil to the blades before, during, and after each use. For optimum performance, oil the blades with the oil provided with the product.

What should you do if the blades need realigning?

After removing blades for cleaning or replacement, or if knocked out of alignment, match the blades point-for-point according to the drawing, then reinstall the cutter and cutting comb with the screws and verify proper alignment.

What are the key safety warnings before using the clipper?

Keep the appliance away from water, unplug immediately if it falls into water, and never reach into water. Do not leave the appliance unattended when plugged in, and use close supervision when children or disabled persons are present.

Oct 23, 2026

Uploaded by pixelkiddo